Your IP : 216.73.217.94
05nss-softokn/module-setup.sh 0000755 00000000445 15272355666 0012203 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 255
}
depends() {
return 0
}
install() {
local _dir
inst_libdir_file libfreeblpriv3.so libfreeblpriv3.chk \
libfreebl3.so
}
95debug/module-setup.sh 0000755 00000000645 15272355666 0011020 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
# do not add this module by default
return 255
}
depends() {
return 0
}
install() {
inst_multiple -o ps grep more cat rm strace free showmount \
ping netstat rpcinfo vi scp ping6 ssh \
fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
}
90qemu-net/module-setup.sh 0000755 00000001353 15272355666 0011455 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm >/dev/null 2>&1)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
}
installkernel() {
# qemu specific modules
hostonly='' instmods virtio_net e1000 8139cp pcnet32 e100 ne2k_pci
}
95ssh-client/module-setup.sh 0000755 00000003446 15272355666 0012005 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# fixme: assume user is root
check() {
[[ $mount_needs ]] && return 1
# If our prerequisites are not met, fail.
require_binaries ssh scp || return 1
if [[ $sshkey ]]; then
[ ! -f $sshkey ] && {
derror "ssh key: $sshkey is not found!"
return 1
}
fi
return 255
}
depends() {
# We depend on network modules being loaded
echo network
}
inst_sshenv()
{
if [ -d /root/.ssh ]; then
inst_dir /root/.ssh
chmod 700 ${initdir}/root/.ssh
fi
# Copy over ssh key and knowhosts if needed
[[ $sshkey ]] && {
inst_simple $sshkey
[[ -f /root/.ssh/known_hosts ]] && inst_simple /root/.ssh/known_hosts
[[ -f /etc/ssh/ssh_known_hosts ]] && inst_simple /etc/ssh/ssh_known_hosts
}
# Copy over root and system-wide ssh configs.
[[ -f /root/.ssh/config ]] && inst_simple /root/.ssh/config
if [[ -f /etc/ssh/ssh_config ]]; then
inst_simple /etc/ssh/ssh_config
sed -i -e 's/\(^[[:space:]]*\)ProxyCommand/\1# ProxyCommand/' ${initdir}/etc/ssh/ssh_config
while read key val || [ -n "$key" ]; do
if [[ $key == "GlobalKnownHostsFile" ]]; then
inst_simple "$val"
# Copy customized UserKnowHostsFile
elif [[ $key == "UserKnownHostsFile" ]]; then
# Make sure that ~/foo will be copied as /root/foo in kdump's initramfs
if str_starts "$val" "~/"; then
val="/root/${val#"~/"}"
fi
inst_simple "$val"
fi
done < /etc/ssh/ssh_config
fi
return 0
}
install() {
inst_multiple ssh scp
inst_sshenv
}
05busybox/module-setup.sh 0000755 00000001360 15272355666 0011407 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
require_binaries busybox || return 1
return 255
}
depends() {
return 0
}
install() {
local _i _progs _path _busybox
_busybox=$(type -P busybox)
inst $_busybox /usr/bin/busybox
for _i in $($_busybox | sed -ne '1,/Currently/!{s/,//g; s/busybox//g; p}')
do
_progs="$_progs $_i"
done
# FIXME: switch_root should be in the above list, but busybox version hangs
# (using busybox-1.15.1-7.fc14.i686 at the time of writing)
for _i in $_progs; do
_path=$(find_binary "$_i")
[ -z "$_path" ] && continue
ln_r /usr/bin/busybox $_path
done
}
95fstab-sys/mount-sys.sh 0000755 00000002541 15272355666 0011175 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh
fstab_mount() {
local _dev _mp _fs _opts _dump _pass _rest
test -e "$1" || return 1
info "Mounting from $1"
while read _dev _mp _fs _opts _dump _pass _rest; do
[ -z "${_dev%%#*}" ] && continue # Skip comment lines
ismounted $_mp && continue # Skip mounted filesystem
if [ "$_pass" -gt 0 ] && ! strstr "$_opts" _netdev; then
fsck_single "$_dev" "$_fs" "$_opts"
fi
_fs=$(det_fs "$_dev" "$_fs")
info "Mounting $_dev"
if [ -d "$NEWROOT/$_mp" ]; then
mount -v -t $_fs -o $_opts $_dev "$NEWROOT/$_mp" 2>&1 | vinfo
else
[ -d "$_mp" ] || mkdir -p "$_mp"
mount -v -t $_fs -o $_opts $_dev $_mp 2>&1 | vinfo
fi
done < $1
return 0
}
# systemd will mount and run fsck from /etc/fstab and we don't want to
# run into a race condition.
if [ -z "$DRACUT_SYSTEMD" ]; then
[ -f /etc/fstab ] && fstab_mount /etc/fstab
fi
# prefer $NEWROOT/etc/fstab.sys over local /etc/fstab.sys
if [ -f $NEWROOT/etc/fstab.sys ]; then
fstab_mount $NEWROOT/etc/fstab.sys
elif [ -f /etc/fstab.sys ]; then
fstab_mount /etc/fstab.sys
fi
95fstab-sys/module-setup.sh 0000755 00000000546 15272355666 0011645 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
test -f /etc/fstab.sys || [[ -n $add_fstab || -n $fstab_lines ]]
}
depends() {
echo fs-lib
}
install() {
[ -f /etc/fstab.sys ] && inst_simple /etc/fstab.sys
inst_hook pre-pivot 00 "$moddir/mount-sys.sh"
}
80cms/cms-write-ifcfg.sh 0000755 00000006305 15272355666 0011050 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts
function cms_write_config()
{
. /tmp/cms.conf
SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
OLDIFS=$IFS
IFS=,
read -a subch_array <<< "indexzero,$SUBCHANNELS"
IFS=$OLDIFS
devbusid=${subch_array[1]}
if [ "$NETTYPE" = "ctc" ]; then
driver="ctcm"
else
driver=$NETTYPE
fi
DEVICE=$(cd /sys/devices/${driver}/$devbusid/net/ && set -- * && [ "$1" != "*" ] && echo $1)
uuid=$(cat /proc/sys/kernel/random/uuid)
IFCFGFILE=/run/initramfs/state/etc/sysconfig/network-scripts/ifcfg-$DEVICE
strstr "$IPADDR" '*:*:*' && ipv6=1
# to please NetworkManager on startup in loader before loader reconfigures net
cat > /etc/sysconfig/network << EOF
HOSTNAME=$HOSTNAME
EOF
echo "$HOSTNAME" > /etc/hostname
if [ "$ipv6" ]; then
echo "NETWORKING_IPV6=yes" >> /etc/sysconfig/network
else
echo "NETWORKING=yes" >> /etc/sysconfig/network
fi
cat > $IFCFGFILE << EOF
DEVICE=$DEVICE
UUID=$uuid
ONBOOT=yes
BOOTPROTO=static
MTU=$MTU
SUBCHANNELS=$SUBCHANNELS
EOF
if [ "$ipv6" ]; then
cat >> $IFCFGFILE << EOF
IPV6INIT=yes
IPV6_AUTOCONF=no
IPV6ADDR=$IPADDR/$NETMASK
IPV6_DEFAULTGW=$GATEWAY
EOF
else
cat >> $IFCFGFILE << EOF
IPADDR=$IPADDR
NETMASK=$NETMASK
BROADCAST=$BROADCAST
GATEWAY=$GATEWAY
EOF
fi
if [ "$ipv6" ]; then
DNS1=$(set -- ${DNS/,/ }; echo $1)
DNS2=$(set -- ${DNS/,/ }; echo $2)
else
DNS1=$(set -- ${DNS/:/ }; echo $1)
DNS2=$(set -- ${DNS/:/ }; echo $2)
fi
# real DNS config for NetworkManager to generate /etc/resolv.conf
[ "$DNS1" != "" ] && echo "DNS1=$DNS1" >> $IFCFGFILE
[ "$DNS2" != "" ] && echo "DNS2=$DNS2" >> $IFCFGFILE
# just to please loader's readNetInfo && writeEnabledNetInfo
# which eats DNS1,DNS2,... and generates it themselves based on DNS
if [ "$ipv6" ]; then
[ "$DNS" != "" ] && echo "DNS=\"$DNS\"" >> $IFCFGFILE
else
[ "$DNS" != "" ] && echo "DNS=\"${DNS/:/,}\"" >> $IFCFGFILE
fi
# colons in SEARCHDNS already replaced with spaces above for /etc/resolv.conf
[ "$SEARCHDNS" != "" ] && echo "DOMAIN=\"$SEARCHDNS\"" >> $IFCFGFILE
[ "$NETTYPE" != "" ] && echo "NETTYPE=$NETTYPE" >> $IFCFGFILE
[ "$PEERID" != "" ] && echo "PEERID=$PEERID" >> $IFCFGFILE
[ "$PORTNAME" != "" ] && echo "PORTNAME=$PORTNAME" >> $IFCFGFILE
[ "$CTCPROT" != "" ] && echo "CTCPROT=$CTCPROT" >> $IFCFGFILE
[ "$MACADDR" != "" ] && echo "MACADDR=$MACADDR" >> $IFCFGFILE
optstr=""
for option in LAYER2 PORTNO; do
[ -z "${!option}" ] && continue
[ -n "$optstr" ] && optstr=${optstr}" "
optstr=${optstr}$(echo ${option} | sed 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/')"="${!option}
done
# write single quotes since network.py removes double quotes but we need quotes
echo "OPTIONS='$optstr'" >> $IFCFGFILE
unset option
unset optstr
unset DNS1
unset DNS2
echo "files /etc/sysconfig/network-scripts" >> /run/initramfs/rwtab
echo "files /var/lib/dhclient" >> /run/initramfs/rwtab
}
[ -f /tmp/cms.conf ] && cms_write_config
80cms/cmssetup.sh 0000755 00000013636 15272355666 0007732 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
function sysecho () {
file="$1"
shift
local i=1
while [ $i -le 10 ] ; do
if [ ! -f "$file" ]; then
sleep 1
i=$((i+1))
else
break
fi
done
local status
read status < "$file"
if [[ ! $status == $* ]]; then
[ -f "$file" ] && echo $* > "$file"
fi
}
function dasd_settle() {
local dasd_status=/sys/bus/ccw/devices/$1/status
if [ ! -f $dasd_status ]; then
return 1
fi
local i=1
while [ $i -le 60 ] ; do
local status
read status < $dasd_status
case $status in
online|unformatted)
return 0 ;;
*)
sleep 0.1
i=$((i+1)) ;;
esac
done
return 1
}
function dasd_settle_all() {
for dasdccw in $(while read line; do echo "${line%%(*}"; done < /proc/dasd/devices) ; do
if ! dasd_settle $dasdccw ; then
echo $"Could not access DASD $dasdccw in time"
return 1
fi
done
return 0
}
# prints a canonocalized device bus ID for a given devno of any format
function canonicalize_devno()
{
case ${#1} in
3) echo "0.0.0${1}" ;;
4) echo "0.0.${1}" ;;
*) echo "${1}" ;;
esac
return 0
}
# read file from CMS and write it to /tmp
function readcmsfile() # $1=dasdport $2=filename
{
local dev
local numcpus
local devname
local ret=0
if [ $# -ne 2 ]; then return; fi
# precondition: udevd created dasda block device node
if ! dasd_cio_free -d $1 ; then
echo $"DASD $1 could not be cleared from device blacklist"
return 1
fi
modprobe dasd_mod dasd=$CMSDASD
modprobe dasd_eckd_mod
udevadm settle
# precondition: dasd_eckd_mod driver incl. dependencies loaded,
# dasd_mod must be loaded without setting any DASD online
dev=$(canonicalize_devno $1)
numcpus=$(
while read line; do
if strstr "$line" "# processors"; then
echo ${line##*:};
break;
fi;
done < /proc/cpuinfo
)
if [ ${numcpus} -eq 1 ]; then
echo 1 > /sys/bus/ccw/devices/$dev/online
else
if ! sysecho /sys/bus/ccw/devices/$dev/online 1; then
echo $"DASD $dev could not be set online"
return 1
fi
udevadm settle
if ! dasd_settle $dev ; then
echo $"Could not access DASD $dev in time"
return 1
fi
fi
udevadm settle
devname=$(cd /sys/bus/ccw/devices/$dev/block; set -- *; [ -b /dev/$1 ] && echo $1)
devname=${devname:-dasda}
[[ -d /mnt ]] || mkdir /mnt
if cmsfs-fuse --to=UTF-8 -a /dev/$devname /mnt; then
cat /mnt/$2 > /run/initramfs/$2
umount /mnt || umount -l /mnt
udevadm settle
else
echo $"Could not read conf file $2 on CMS DASD $1."
ret=1
fi
if ! sysecho /sys/bus/ccw/devices/$dev/online 0; then
echo $"DASD $dev could not be set offline again"
#return 1
fi
udevadm settle
# unbind all dasds to unload the dasd modules for a clean start
( cd /sys/bus/ccw/drivers/dasd-eckd; for i in *.*; do echo $i > unbind;done)
udevadm settle
modprobe -r dasd_eckd_mod
udevadm settle
modprobe -r dasd_diag_mod
udevadm settle
modprobe -r dasd_mod
udevadm settle
return $ret
}
processcmsfile()
{
source /tmp/cms.conf
SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
if [[ $NETTYPE ]]; then
(
echo -n $NETTYPE,$SUBCHANNELS
[[ $PORTNAME ]] && echo -n ",portname=$PORTNAME"
[[ $LAYER2 ]] && echo -n ",layer2=$LAYER2"
[[ "$NETTYPE" = "ctc" ]] && [[ $CTCPROT ]] && echo -n ",protocol=$CTCPROT"
echo
) >> /etc/ccw.conf
OLDIFS=$IFS
IFS=,
read -a subch_array <<< "indexzero,$SUBCHANNELS"
IFS=$OLDIFS
devbusid=${subch_array[1]}
if [ "$NETTYPE" = "ctc" ]; then
driver="ctcm"
else
driver=$NETTYPE
fi
printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
# remove the default net rules
rm -f -- /etc/udev/rules.d/91-default-net.rules
[[ -f /etc/udev/rules.d/90-net.rules ]] \
|| printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
udevadm control --reload
znet_cio_free
fi
if [[ $DASD ]] && [[ $DASD != "none" ]]; then
echo $DASD | normalize_dasd_arg > /etc/dasd.conf
echo "options dasd_mod dasd=$DASD" > /etc/modprobe.d/dasd_mod.conf
dasd_cio_free
fi
unset _do_zfcp
for i in ${!FCP_*}; do
echo "${!i}" | while read port rest; do
case $port in
*.*.*)
;;
*.*)
port="0.$port"
;;
*)
port="0.0.$port"
;;
esac
echo $port $rest >> /etc/zfcp.conf
done
_do_zfcp=1
done
[[ $_do_zfcp ]] && zfcp_cio_free
unset _do_zfcp
}
[[ $CMSDASD ]] || CMSDASD=$(getarg "CMSDASD=")
[[ $CMSCONFFILE ]] || CMSCONFFILE=$(getarg "CMSCONFFILE=")
# Parse configuration
if [ -n "$CMSDASD" -a -n "$CMSCONFFILE" ]; then
if readcmsfile $CMSDASD $CMSCONFFILE; then
ln -s /run/initramfs/$CMSCONFFILE /tmp/$CMSCONFFILE
ln -s /run/initramfs/$CMSCONFFILE /tmp/cms.conf
processcmsfile
fi
fi
80cms/module-setup.sh 0000755 00000001611 15272355666 0010500 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
return 255
}
depends() {
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
echo znet zfcp dasd dasd_mod
return 0
}
installkernel() {
instmods zfcp
}
install() {
inst_hook pre-trigger 30 "$moddir/cmssetup.sh"
inst_hook pre-pivot 95 "$moddir/cms-write-ifcfg.sh"
inst_script "$moddir/cmsifup.sh" /sbin/cmsifup
inst_multiple /etc/cmsfs-fuse/filetypes.conf /etc/udev/rules.d/99-fuse.rules /etc/fuse.conf \
cmsfs-fuse fusermount ulockmgr_server bash insmod rmmod cat normalize_dasd_arg sed \
$(rpm -ql s390utils-base)
inst_libdir_file "gconv/*"
#inst /usr/lib/locale/locale-archive
dracut_need_initqueue
}
80cms/cmsifup.sh 0000755 00000001577 15272355666 0007536 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
DEVICE=$1
. /tmp/cms.conf
strstr "$IPADDR" '*:*:*' && ipv6=1
if [ "$ipv6" ] && ! str_starts "$IPADDR" "["; then
IPADDR="[$IPADDR]"
fi
if [ "$ipv6" ] && ! str_starts "$GATEWAY" "["; then
GATEWAY="[$GATEWAY]"
fi
if [ "$ipv6" ]; then
DNS1=$(set -- ${DNS/,/ }; echo $1)
DNS2=$(set -- ${DNS/,/ }; echo $2)
else
DNS1=$(set -- ${DNS/:/ }; echo $1)
DNS2=$(set -- ${DNS/:/ }; echo $2)
fi
{
echo "ip=$IPADDR::$GATEWAY:$NETMASK:$HOSTNAME:$DEVICE:none:$MTU:$MACADDR"
for i in $DNS1 $DNS2; do
echo "nameserver=$i"
done
} > /etc/cmdline.d/80-cms.conf
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
IFACES="$IFACES $DEVICE"
echo "$IFACES" >> /tmp/net.ifaces
exec ifup "$DEVICE"
90livenet/livenetroot.sh 0000755 00000001240 15272355666 0011312 0 ustar 00 #!/bin/sh
# livenetroot - fetch a live image from the network and run it
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/url-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
[ -e /tmp/livenet.downloaded ] && exit 0
# args get passed from 40network/netroot
netroot="$2"
liveurl="${netroot#livenet:}"
info "fetching $liveurl"
imgfile=$(fetch_url "$liveurl")
if [ $? != 0 ]; then
warn "failed to download live image: error $?"
exit 1
fi
> /tmp/livenet.downloaded
# TODO: couldn't dmsquash-live-root handle this?
if [ ${imgfile##*.} = "iso" ]; then
root=$(losetup -f)
losetup $root $imgfile
else
root=$imgfile
fi
exec /sbin/dmsquash-live-root $root
90livenet/parse-livenet.sh 0000755 00000001716 15272355666 0011526 0 ustar 00 #!/bin/sh
# live net images - just like live images, but specified like:
# root=live:[url-to-backing-file]
[ -z "$root" ] && root=$(getarg root=)
. /lib/url-lib.sh
# live updates
updates=$(getarg live.updates=)
if [ -n "$updates" ]; then
# make sure network comes up even if we're doing a local live device
if [ -z "$netroot" ]; then
echo > /tmp/net.ifaces
fi
echo "$updates" > /tmp/liveupdates.info
echo '[ -e /tmp/liveupdates.done ]' > \
$hookdir/initqueue/finished/liveupdates.sh
fi
str_starts "$root" "live:" && liveurl="$root"
str_starts "$liveurl" "live:" || return
liveurl="${liveurl#live:}"
# setting netroot to "livenet:..." makes "livenetroot" get run after ifup
if get_url_handler "$liveurl" >/dev/null; then
info "livenet: root image at $liveurl"
netroot="livenet:$liveurl"
root="livenet" # quiet complaints from init
rootok=1
wait_for_dev -n /dev/root
else
info "livenet: no url handler for $liveurl"
fi
90livenet/fetch-liveupdate.sh 0000755 00000001531 15272355666 0012174 0 ustar 00 #!/bin/bash
# fetch-liveupdate - fetch an update image for dmsquash-live media.
# this gets called by the "initqueue/online" hook for each network interface
# that comes online.
# no updates requested? we're not needed.
[ -e /tmp/liveupdates.info ] || return 0
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v fetch_url >/dev/null || . /lib/url-lib.sh
command -v unpack_img >/dev/null || . /lib/img-lib.sh
read url < /tmp/liveupdates.info
info "fetching live updates from $url"
fetch_url "$url" /tmp/updates.img
if [ $? != 0 ]; then
warn "failed to fetch update image!"
warn "url: $url"
return 1
fi
unpack_img /tmp/updates.img /updates.tmp.$$
if [ $? != 0 ]; then
warn "failed to unpack update image!"
warn "url: $url"
return 1
fi
copytree /updates.tmp.$$ /updates
mv /tmp/liveupdates.info /tmp/liveupdates.done
90livenet/module-setup.sh 0000755 00000000554 15272355666 0011372 0 ustar 00 #!/bin/bash
# module-setup.sh for livenet
check() {
return 255
}
depends() {
echo network url-lib dmsquash-live img-lib
return 0
}
install() {
inst_hook cmdline 29 "$moddir/parse-livenet.sh"
inst_hook initqueue/online 95 "$moddir/fetch-liveupdate.sh"
inst_script "$moddir/livenetroot.sh" "/sbin/livenetroot"
dracut_need_initqueue
}
98selinux/module-setup.sh 0000755 00000000432 15272355666 0011416 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 255
}
depends() {
return 0
}
install() {
inst_hook pre-pivot 50 "$moddir/selinux-loadpolicy.sh"
inst_multiple setenforce
}
98selinux/selinux-loadpolicy.sh 0000755 00000004440 15272355666 0012622 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# FIXME: load selinux policy. this should really be done after we switchroot
rd_load_policy()
{
# If SELinux is disabled exit now
getarg "selinux=0" > /dev/null && return 0
SELINUX="enforcing"
[ -e "$NEWROOT/etc/selinux/config" ] && . "$NEWROOT/etc/selinux/config"
# Check whether SELinux is in permissive mode
permissive=0
getarg "enforcing=0" > /dev/null
if [ $? -eq 0 -o "$SELINUX" = "permissive" ]; then
permissive=1
fi
# Attempt to load SELinux Policy
if [ -x "$NEWROOT/usr/sbin/load_policy" -o -x "$NEWROOT/sbin/load_policy" ]; then
local ret=0
local out
info "Loading SELinux policy"
mount -o bind /sys $NEWROOT/sys
# load_policy does mount /proc and /sys/fs/selinux in
# libselinux,selinux_init_load_policy()
if [ -x "$NEWROOT/sbin/load_policy" ]; then
out=$(LANG=C chroot "$NEWROOT" /sbin/load_policy -i 2>&1)
ret=$?
info $out
else
out=$(LANG=C chroot "$NEWROOT" /usr/sbin/load_policy -i 2>&1)
ret=$?
info $out
fi
umount $NEWROOT/sys/fs/selinux
umount $NEWROOT/sys
if [ "$SELINUX" = "disabled" ]; then
return 0;
fi
if [ $ret -eq 0 -o $ret -eq 2 ]; then
# If machine requires a relabel, force to permissive mode
[ -e "$NEWROOT"/.autorelabel ] && LANG=C /usr/sbin/setenforce 0
mount --rbind /dev "$NEWROOT/dev"
LANG=C chroot "$NEWROOT" /sbin/restorecon -R /dev
umount -R "$NEWROOT/dev"
return 0
fi
warn "Initial SELinux policy load failed."
if [ $ret -eq 3 -o $permissive -eq 0 ]; then
warn "Machine in enforcing mode."
warn "Not continuing"
action_on_fail -n selinux || exit 1
fi
return 0
elif [ $permissive -eq 0 -a "$SELINUX" != "disabled" ]; then
warn "Machine in enforcing mode and cannot execute load_policy."
warn "To disable selinux, add selinux=0 to the kernel command line."
warn "Not continuing"
action_on_fail -n selinux || exit 1
fi
}
rd_load_policy
90dm/11-dm.rules 0000644 00000000216 15272355666 0007230 0 ustar 00 SUBSYSTEM!="block", GOTO="dm_end"
KERNEL!="dm-[0-9]*", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
OPTIONS+="db_persist"
LABEL="dm_end"
90dm/module-setup.sh 0000755 00000002034 15272355666 0010317 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
require_binaries dmsetup || return 1
return 255
}
depends() {
return 0
}
installkernel() {
instmods =drivers/md
instmods dm_mod dm-cache dm-cache-mq dm-cache-cleaner
}
install() {
modinfo -k $kernel dm_mod >/dev/null 2>&1 && \
inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh"
inst_multiple dmsetup
inst_multiple -o dmeventd
inst_libdir_file "libdevmapper-event.so*"
inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules
# Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
# files, but provides the one below:
inst_rules 64-device-mapper.rules
# debian udev rules
inst_rules 60-persistent-storage-dm.rules 55-dm.rules
inst_rules "$moddir/11-dm.rules"
inst_rules "$moddir/59-persistent-storage-dm.rules"
prepare_udev_rules 59-persistent-storage-dm.rules
inst_hook shutdown 30 "$moddir/dm-shutdown.sh"
}
90dm/dm-shutdown.sh 0000755 00000000721 15272355666 0010146 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
_do_dm_shutdown() {
local ret
local final=$1
info "Disassembling device-mapper devices"
dmsetup -v remove_all
ret=$?
if [ "x$final" != "x" ]; then
info "dmsetup ls --tree"
dmsetup ls --tree 2>&1 | vinfo
fi
return $ret
}
if command -v dmsetup >/dev/null; then
_do_dm_shutdown $1
else
:
fi
90dm/59-persistent-storage-dm.rules 0000644 00000001236 15272355666 0013107 0 ustar 00 SUBSYSTEM!="block", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="dm_end"
KERNEL!="dm-[0-9]*", GOTO="dm_end"
ACTION=="add", GOTO="dm_end"
IMPORT{program}="/sbin/dmsetup info -c --nameprefixes --unquoted --rows --noheadings -o name,uuid,suspended,readonly,major,minor,open,tables_loaded,names_using_dev -j%M -m%m"
ENV{DM_NAME}!="?*", GOTO="dm_end"
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end"
ENV{DM_UUID}=="CRYPT-TEMP-?*", GOTO="dm_end"
ENV{DM_UUID}!="?*", ENV{DM_NAME}=="temporary-cryptsetup-?*", GOTO="dm_end"
IMPORT BLKID
LABEL="dm_end"
90dm/dm-pre-udev.sh 0000755 00000000323 15272355666 0010020 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
strstr "$(cat /proc/misc)" device-mapper || modprobe dm_mod
modprobe dm_mirror 2>/dev/null
90multipath/module-setup.sh 0000755 00000007320 15272355667 0011732 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
is_mpath() {
local _dev=$1
[ -e /sys/dev/block/$_dev/dm/uuid ] || return 1
[[ $(cat /sys/dev/block/$_dev/dm/uuid) =~ mpath- ]] && return 0
return 1
}
majmin_to_mpath_dev() {
local _dev
for i in /dev/mapper/*; do
[[ $i == /dev/mapper/control ]] && continue
_dev=$(get_maj_min $i)
if [ "$_dev" = "$1" ]; then
echo $i
return
fi
done
}
check() {
local _rootdev
# if there's no multipath binary, no go.
require_binaries multipath || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves is_mpath || return 255
}
return 0
}
depends() {
echo rootfs-block
echo dm
return 0
}
installkernel() {
local _ret
local _arch=$(uname -m)
mp_mod_filter() {
local _funcs='scsi_register_device_handler|dm_dirty_log_type_register|dm_register_path_selector|dm_register_target'
# subfunctions inherit following FDs
local _merge=8 _side2=9
function bmf1() {
local _f
while read _f; do
case "$_f" in
*.ko) [[ $(< $_f) =~ $_funcs ]] && echo "$_f" ;;
*.ko.gz) [[ $(gzip -dc <$_f) =~ $_funcs ]] && echo "$_f" ;;
*.ko.xz) [[ $(xz -dc <$_f) =~ $_funcs ]] && echo "$_f" ;;
esac
done
return 0
}
function rotor() {
local _f1 _f2
while read _f1; do
echo "$_f1"
if read _f2; then
echo "$_f2" 1>&${_side2}
fi
done | bmf1 1>&${_merge}
return 0
}
# Use two parallel streams to filter alternating modules.
set +x
eval "( ( rotor ) ${_side2}>&1 | bmf1 ) ${_merge}>&1"
[[ $debug ]] && set -x
return 0
}
( find_kernel_modules_by_path drivers/scsi; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/scsi; fi;
find_kernel_modules_by_path drivers/md ) | mp_mod_filter | hostonly='' instmods
}
install() {
local _f _allow
add_hostonly_mpath_conf() {
is_mpath $1 && {
local _dev
_dev=$(majmin_to_mpath_dev $1)
[ -z "$_dev" ] && return
strstr "$_allow" "$_dev" && return
_allow="$_allow --allow $_dev"
}
}
inst_multiple -o \
dmsetup \
kpartx \
mpath_wait \
multipath \
multipathd \
mpathpersist \
xdrgetuid \
xdrgetprio \
/etc/xdrdevices.conf \
/etc/multipath.conf \
/etc/multipath/*
[[ $hostonly ]] && [[ $hostonly_mode = "strict" ]] && {
for_each_host_dev_and_slaves_all add_hostonly_mpath_conf
[ -n "$_allow" ] && mpathconf $_allow --outfile ${initdir}/etc/multipath.conf
}
inst $(command -v partx) /sbin/partx
inst_libdir_file "libmultipath*" "multipath/*"
if dracut_module_included "systemd"; then
inst_multiple \
$systemdsystemunitdir/multipathd.service
mkdir -p "${initdir}${systemdsystemconfdir}/sysinit.target.wants"
ln -rfs "${initdir}${systemdsystemunitdir}/multipathd.service" "${initdir}${systemdsystemconfdir}/sysinit.target.wants/multipathd.service"
else
inst_hook pre-trigger 02 "$moddir/multipathd.sh"
inst_hook cleanup 02 "$moddir/multipathd-stop.sh"
fi
inst_hook cleanup 80 "$moddir/multipathd-needshutdown.sh"
inst_rules 40-multipath.rules 62-multipath.rules 65-multipath.rules 66-kpartx.rules
}
90multipath/multipathd-stop.sh 0000755 00000000533 15272355667 0012444 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /etc/multipath.conf ]; then
HARD=""
while pidof multipathd >/dev/null 2>&1; do
for pid in $(pidof multipathd); do
kill $HARD $pid >/dev/null 2>&1
done
HARD="-9"
done
fi
90multipath/multipathd-needshutdown.sh 0000755 00000000326 15272355667 0014166 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
for i in /dev/mapper/mpath*; do
[ -b "$i" ] || continue
need_shutdown
break
done
90multipath/multipathd.sh 0000755 00000000455 15272355667 0011464 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /etc/multipath.conf ]; then
modprobe dm-multipath
multipathd -B || multipathd
need_shutdown
else
rm -- /etc/udev/rules.d/??-multipath.rules 2>/dev/null
fi
04watchdog/module-setup.sh 0000755 00000005561 15272355667 0011523 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 255
}
depends() {
return 0
}
install() {
# Do not add watchdog hooks if systemd module is included
# In that case, systemd will manage watchdog kick
if ! dracut_module_included "systemd"; then
inst_hook cmdline 00 "$moddir/watchdog.sh"
inst_hook cmdline 50 "$moddir/watchdog.sh"
inst_hook pre-trigger 00 "$moddir/watchdog.sh"
inst_hook initqueue 00 "$moddir/watchdog.sh"
inst_hook mount 00 "$moddir/watchdog.sh"
inst_hook mount 50 "$moddir/watchdog.sh"
inst_hook mount 99 "$moddir/watchdog.sh"
inst_hook pre-pivot 00 "$moddir/watchdog.sh"
inst_hook pre-pivot 99 "$moddir/watchdog.sh"
inst_hook cleanup 00 "$moddir/watchdog.sh"
inst_hook cleanup 99 "$moddir/watchdog.sh"
fi
inst_hook emergency 02 "$moddir/watchdog-stop.sh"
inst_multiple -o wdctl
}
installkernel() {
local -A _drivers
local _alldrivers _active _wdtdrv _wdtppath _dir
[[ -d /sys/class/watchdog/ ]] || return
for _dir in /sys/class/watchdog/*; do
[[ -d "$_dir" ]] || continue
[[ -f "$_dir/state" ]] || continue
_active=$(< "$_dir/state")
! [[ $hostonly ]] || [[ "$_active" = "active" ]] || continue
# device/modalias will return driver of this device
_wdtdrv=$(< "$_dir/device/modalias")
# There can be more than one module represented by same
# modalias. Currently load all of them.
# TODO: Need to find a way to avoid any unwanted module
# represented by modalias
_wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
instmods $_wdtdrv
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
# however in some cases, we also need to check that if there is
# a specific driver for the parent bus/device. In such cases
# we also need to enable driver for parent bus/device.
_wdtppath=$(readlink -f "$_dir/device")
while [[ -d "$_wdtppath" ]] && [[ "$_wdtppath" != "/sys" ]]; do
_wdtppath=$(readlink -f "$_wdtppath/..")
[[ -f "$_wdtppath/modalias" ]] || continue
_wdtdrv=$(< "$_wdtppath/modalias")
_wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
instmods $_wdtdrv
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
done
done
# ensure that watchdog module is loaded as early as possible
_alldrivers="${!_drivers[*]}"
[[ $_alldrivers ]] && echo "rd.driver.pre=${_alldrivers// /,}" > ${initdir}/etc/cmdline.d/00-watchdog.conf
return 0
}
04watchdog/watchdog.sh 0000755 00000000365 15272355667 0010675 0 ustar 00 #!/bin/sh
if [ -e /dev/watchdog ]; then
if [ ! -e /tmp/watchdog_timeout ]; then
wdctl -s 60 /dev/watchdog >/dev/null 2>&1
> /tmp/watchdog_timeout
fi
info "Triggering watchdog"
>/dev/watchdog
else
modprobe ib700wdt
modprobe i6300esb
fi
04watchdog/watchdog-stop.sh 0000755 00000000075 15272355667 0011656 0 ustar 00 #!/bin/sh
[ -c /dev/watchdog ] && printf 'V' > /dev/watchdog
95rootfs-block/rootfallback.sh 0000755 00000002510 15272355667 0012350 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
for root in $(getargs rootfallback=); do
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="/dev/disk/by-label/${root#LABEL=}"
;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="${root#UUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="/dev/disk/by-uuid/${root#UUID=}"
;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="${root#PARTUUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="/dev/disk/by-partuuid/${root}"
;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="/dev/disk/by-partlabel/${root#PARTLABEL=}"
;;
esac
if ! [ -b "$root" ]; then
warn "Could not find rootfallback $root"
continue
fi
if mount "$root" /sysroot; then
info "Mounted rootfallback $root"
exit 0
else
warn "Failed to mount rootfallback $root"
exit 1
fi
done
[ -e "$job" ] && rm -f "$job"
95rootfs-block/block-genrules.sh 0000755 00000001103 15272355667 0012616 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ "${root%%:*}" = "block" ]; then
{
printf 'KERNEL=="%s", SYMLINK+="root"\n' \
${root#block:/dev/}
printf 'SYMLINK=="%s", SYMLINK+="root"\n' \
${root#block:/dev/}
} >> /etc/udev/rules.d/99-root.rules
printf '[ -e "%s" ] && { ln -s "%s" /dev/root 2>/dev/null; rm "$job"; }\n' \
"${root#block:}" "${root#block:}" > $hookdir/initqueue/settled/blocksymlink.sh
wait_for_dev "${root#block:}"
fi
95rootfs-block/parse-block.sh 0000755 00000002012 15272355667 0012104 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="${root#UUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="${root#PARTUUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="block:/dev/disk/by-partuuid/${root}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/*)
root="block:${root}"
rootok=1 ;;
esac
[ "${root%%:*}" = "block" ] && wait_for_dev "${root#block:}"
95rootfs-block/module-setup.sh 0000755 00000003267 15272355667 0012342 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 0
}
depends() {
echo fs-lib
}
cmdline_journal() {
if [[ $hostonly ]]; then
for dev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue
rootopts=$(find_dev_fsopts "$dev")
if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then
journaldev=$(fs_get_option $rootopts "jdev")
elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then
journaldev=$(fs_get_option $rootopts "logdev")
fi
if [ -n "$journaldev" ]; then
printf " root.journaldev=%s" "$journaldev"
fi
done
fi
return 0
}
cmdline() {
local dev=/dev/block/$(find_root_block_device)
if [ -e $dev ] && [ -n "$root_dev" ] ; then
printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$dev")")"
printf " rootflags=%s" "$(find_mp_fsopts /)"
printf " rootfstype=%s" "$(find_mp_fstype /)"
fi
cmdline_journal
}
install() {
if [[ $hostonly_cmdline == "yes" ]]; then
journaldev=$(cmdline_journal)
[[ $journaldev ]] && printf "%s\n" "$journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf"
fi
inst_multiple umount
inst_multiple tr
if ! dracut_module_included "systemd"; then
inst_hook cmdline 95 "$moddir/parse-block.sh"
inst_hook pre-udev 30 "$moddir/block-genrules.sh"
inst_hook mount 99 "$moddir/mount-root.sh"
fi
inst_hook initqueue/timeout 99 "$moddir/rootfallback.sh"
}
95rootfs-block/mount-root.sh 0000755 00000010642 15272355667 0012035 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh
mount_root() {
local _ret
local _rflags_ro
# sanity - determine/fix fstype
rootfs=$(det_fs "${root#block:}" "$fstype")
journaldev=$(getarg "root.journaldev=")
if [ -n "$journaldev" ]; then
case "$rootfs" in
xfs)
rflags="${rflags:+${rflags},}logdev=$journaldev"
;;
reiserfs)
fsckoptions="-j $journaldev $fsckoptions"
rflags="${rflags:+${rflags},}jdev=$journaldev"
;;
*);;
esac
fi
_rflags_ro="$rflags,ro"
_rflags_ro="${_rflags_ro##,}"
while ! mount -t ${rootfs} -o "$_rflags_ro" "${root#block:}" "$NEWROOT"; do
warn "Failed to mount -t ${rootfs} -o $_rflags_ro ${root#block:} $NEWROOT"
fsck_ask_err
done
READONLY=
fsckoptions=
if [ -f "$NEWROOT"/etc/sysconfig/readonly-root ]; then
. "$NEWROOT"/etc/sysconfig/readonly-root
fi
if getargbool 0 "readonlyroot=" -y readonlyroot; then
READONLY=yes
fi
if getarg noreadonlyroot ; then
READONLY=no
fi
if [ -f "$NEWROOT"/fastboot ] || getargbool 0 fastboot ; then
fastboot=yes
fi
if ! getargbool 0 rd.skipfsck; then
if [ -f "$NEWROOT"/fsckoptions ]; then
fsckoptions=$(cat "$NEWROOT"/fsckoptions)
fi
if [ -f "$NEWROOT"/forcefsck ] || getargbool 0 forcefsck ; then
fsckoptions="-f $fsckoptions"
elif [ -f "$NEWROOT"/.autofsck ]; then
[ -f "$NEWROOT"/etc/sysconfig/autofsck ] && \
. "$NEWROOT"/etc/sysconfig/autofsck
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
fi
if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
warn "*** Warning -- the system did not shut down cleanly. "
warn "*** Dropping you to a shell; the system will continue"
warn "*** when you leave the shell."
action_on_fail
fi
fsckoptions="$AUTOFSCK_OPT $fsckoptions"
fi
fi
rootopts=
if getargbool 1 rd.fstab -d -n rd_NO_FSTAB \
&& ! getarg rootflags \
&& [ -f "$NEWROOT/etc/fstab" ] \
&& ! [ -L "$NEWROOT/etc/fstab" ]; then
# if $NEWROOT/etc/fstab contains special mount options for
# the root filesystem,
# remount it with the proper options
rootopts="defaults"
while read dev mp fs opts dump fsck; do
# skip comments
[ "${dev%%#*}" != "$dev" ] && continue
if [ "$mp" = "/" ]; then
# sanity - determine/fix fstype
rootfs=$(det_fs "${root#block:}" "$fs")
rootopts=$opts
rootfsck=$fsck
break
fi
done < "$NEWROOT/etc/fstab"
fi
# we want rootflags (rflags) to take precedence so prepend rootopts to
# them
rflags="${rootopts},${rflags}"
rflags="${rflags#,}"
rflags="${rflags%,}"
# backslashes are treated as escape character in fstab
# esc_root=$(echo ${root#block:} | sed 's,\\,\\\\,g')
# printf '%s %s %s %s 1 1 \n' "$esc_root" "$NEWROOT" "$rootfs" "$rflags" >/etc/fstab
ran_fsck=0
if fsck_able "$rootfs" && \
[ "$rootfsck" != "0" -a -z "$fastboot" -a "$READONLY" != "yes" ] && \
! strstr "${rflags}" _netdev && \
! getargbool 0 rd.skipfsck; then
umount "$NEWROOT"
fsck_single "${root#block:}" "$rootfs" "$rflags" "$fsckoptions"
_ret=$?
ran_fsck=1
fi
echo "${root#block:} $NEWROOT $rootfs ${rflags:-defaults} 0 $rootfsck" >> /etc/fstab
if ! ismounted "$NEWROOT"; then
info "Mounting ${root#block:} with -o ${rflags}"
mount "$NEWROOT" 2>&1 | vinfo
elif ! are_lists_eq , "$rflags" "$_rflags_ro" defaults; then
info "Remounting ${root#block:} with -o ${rflags}"
mount -o remount "$NEWROOT" 2>&1 | vinfo
fi
if ! getargbool 0 rd.skipfsck; then
[ -f "$NEWROOT"/forcefsck ] && rm -f -- "$NEWROOT"/forcefsck 2>/dev/null
[ -f "$NEWROOT"/.autofsck ] && rm -f -- "$NEWROOT"/.autofsck 2>/dev/null
fi
}
if [ -n "$root" -a -z "${root%%block:*}" ]; then
mount_root
fi
30convertfs/do-convertfs.sh 0000755 00000000460 15272355667 0011712 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if getargbool 0 rd.convertfs; then
if getargbool 0 rd.debug; then
bash -x convertfs "$NEWROOT" 2>&1 | vinfo
else
convertfs "$NEWROOT" 2>&1 | vinfo
fi
fi
30convertfs/module-setup.sh 0000755 00000000605 15272355667 0011725 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
[[ $mount_needs ]] && return 1
return 255
}
depends() {
return 0
}
install() {
inst_multiple bash find ldconfig mv rm cp ln
inst_hook pre-pivot 99 "$moddir/do-convertfs.sh"
inst_script "$moddir/convertfs.sh" /usr/bin/convertfs
}
30convertfs/convertfs.sh 0000755 00000013741 15272355667 0011320 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
ROOT="$1"
if [[ ! -d "$ROOT" ]]; then
echo "Usage: $0 <rootdir>"
exit 1
fi
if [[ "$ROOT" -ef / ]]; then
echo "Can't convert the running system."
echo "Please boot with 'rd.convertfs' on the kernel command line,"
echo "to update with the help of the initramfs,"
echo "or run this script from a rescue system."
exit 1
fi
while [[ "$ROOT" != "${ROOT%/}" ]]; do
ROOT=${ROOT%/}
done
if [ ! -L $ROOT/var/run -a -e $ROOT/var/run ]; then
echo "Converting /var/run to symlink"
mv -f $ROOT/var/run $ROOT/var/run.runmove~
ln -sfn ../run $ROOT/var/run
fi
if [ ! -L $ROOT/var/lock -a -e $ROOT/var/lock ]; then
echo "Converting /var/lock to symlink"
mv -f $ROOT/var/lock $ROOT/var/lock.lockmove~
ln -sfn ../run/lock $ROOT/var/lock
fi
needconvert() {
for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64"; do
if [[ -e "$dir" ]]; then
[[ -L "$dir" ]] || return 0
fi
done
return 1
}
if ! [ -e "$ROOT/usr/bin" ]; then
echo "$ROOT/usr/bin does not exist!"
echo "Make sure, the kernel command line has enough information"
echo "to mount /usr (man dracut.cmdline)"
exit 1
fi
if ! needconvert; then
echo "Your system is already converted."
exit 0
fi
testfile="$ROOT/.usrmovecheck$$"
rm -f -- "$testfile"
> "$testfile"
if [[ ! -e "$testfile" ]]; then
echo "Cannot write to $ROOT/"
exit 1
fi
rm -f -- "$testfile"
testfile="$ROOT/usr/.usrmovecheck$$"
rm -f -- "$testfile"
> "$testfile"
if [[ ! -e "$testfile" ]]; then
echo "Cannot write to $ROOT/usr/"
exit 1
fi
rm -f -- "$testfile"
find_mount() {
local dev mnt etc wanted_dev
wanted_dev="$(readlink -e -q $1)"
while read dev mnt etc; do
[ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
done < /proc/mounts
return 1
}
# usage: ismounted <mountpoint>
# usage: ismounted /dev/<device>
if command -v findmnt >/dev/null; then
ismounted() {
findmnt "$1" > /dev/null 2>&1
}
else
ismounted() {
if [ -b "$1" ]; then
find_mount "$1" > /dev/null && return 0
return 1
fi
while read a m a; do
[ "$m" = "$1" ] && return 0
done < /proc/mounts
return 1
}
fi
# clean up after ourselves no matter how we die.
cleanup() {
echo "Something failed. Move back to the original state"
for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64" \
"$ROOT/usr/bin" "$ROOT/usr/sbin" "$ROOT/usr/lib" \
"$ROOT/usr/lib64"; do
[[ -d "${dir}.usrmove-new" ]] && rm -fr -- "${dir}.usrmove-new"
if [[ -d "${dir}.usrmove-old" ]]; then
mv "$dir" "${dir}.del~"
mv "${dir}.usrmove-old" "$dir"
rm -fr -- "${dir}.del~"
fi
done
}
trap 'ret=$?; [[ $ret -ne 0 ]] && cleanup;exit $ret;' EXIT
trap 'exit 1;' SIGINT
ismounted "$ROOT/usr" || CP_HARDLINK="-l"
set -e
# merge / and /usr in new dir in /usr
for dir in bin sbin lib lib64; do
rm -rf -- "$ROOT/usr/${dir}.usrmove-new"
[[ -L "$ROOT/$dir" ]] && continue
[[ -d "$ROOT/$dir" ]] || continue
echo "Make a copy of \`$ROOT/usr/$dir'."
[[ -d "$ROOT/usr/$dir" ]] \
&& cp -ax -l "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-new"
echo "Merge the copy with \`$ROOT/$dir'."
[[ -d "$ROOT/usr/${dir}.usrmove-new" ]] \
|| mkdir -p "$ROOT/usr/${dir}.usrmove-new"
cp -axT $CP_HARDLINK --backup --suffix=.usrmove~ "$ROOT/$dir" "$ROOT/usr/${dir}.usrmove-new"
echo "Clean up duplicates in \`$ROOT/usr/$dir'."
# delete all symlinks that have been backed up
find "$ROOT/usr/${dir}.usrmove-new" -type l -name '*.usrmove~' -delete || :
# replace symlink with backed up binary
find "$ROOT/usr/${dir}.usrmove-new" \
-name '*.usrmove~' \
-type f \
-exec bash -c 'p="{}";o=${p%%%%.usrmove~};
[[ -L "$o" ]] && mv -f "$p" "$o"' ';' || :
done
# switch over merged dirs in /usr
for dir in bin sbin lib lib64; do
[[ -d "$ROOT/usr/${dir}.usrmove-new" ]] || continue
echo "Switch to new \`$ROOT/usr/$dir'."
rm -fr -- "$ROOT/usr/${dir}.usrmove-old"
mv "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-old"
mv "$ROOT/usr/${dir}.usrmove-new" "$ROOT/usr/$dir"
done
# replace dirs in / with links to /usr
for dir in bin sbin lib lib64; do
[[ -L "$ROOT/$dir" ]] && continue
[[ -d "$ROOT/$dir" ]] || continue
echo "Create \`$ROOT/$dir' symlink."
rm -fr -- "$ROOT/${dir}.usrmove-old" || :
mv "$ROOT/$dir" "$ROOT/${dir}.usrmove-old"
ln -sfn usr/$dir "$ROOT/$dir"
done
echo "Clean up backup files."
# everything seems to work; cleanup
for dir in bin sbin lib lib64; do
# if we get killed in the middle of "rm -rf", ensure not to leave
# an incomplete directory, which is moved back by cleanup()
[[ -d "$ROOT/usr/${dir}.usrmove-old" ]] \
&& mv "$ROOT/usr/${dir}.usrmove-old" "$ROOT/usr/${dir}.usrmove-old~"
[[ -d "$ROOT/${dir}.usrmove-old" ]] \
&& mv "$ROOT/${dir}.usrmove-old" "$ROOT/${dir}.usrmove-old~"
done
for dir in bin sbin lib lib64; do
[[ -d "$ROOT/usr/${dir}.usrmove-old~" ]] \
&& rm -rf -- "$ROOT/usr/${dir}.usrmove-old~" || :
[[ -d "$ROOT/${dir}.usrmove-old~" ]] \
&& rm -rf -- "$ROOT/${dir}.usrmove-old~" || :
done
for dir in lib lib64; do
[[ -d "$ROOT/$dir" ]] || continue
for lib in "$ROOT"/usr/${dir}/lib*.so*.usrmove~; do
[[ -f $lib ]] || continue
mv $lib ${lib/.so/_so}
done
done
set +e
echo "Run ldconfig."
ldconfig -r "$ROOT"
. $ROOT/etc/selinux/config
if [ -n "$(command -v setfiles)" ] && [ "$SELINUX" != "disabled" ] && [ -f /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts ]; then
echo "Fixing SELinux labels"
setfiles -r $ROOT -p /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts $ROOT/sbin $ROOT/bin $ROOT/lib $ROOT/lib64 $ROOT/usr/lib $ROOT/usr/lib64 $ROOT/etc/ld.so.cache $ROOT/var/cache/ldconfig || :
fi
echo "Done."
exit 0
99base/memtrace-ko.sh 0000755 00000013644 15272355667 0010435 0 ustar 00 #!/bin/sh
# Try to find out kernel modules with large total memory allocation during loading.
# For large slab allocation, it will fall into buddy, also not trace "mm_page_free"
# considering large free is quite rare for module_init, thus saving tons of events
# to avoid trace data overwritten.
#
# Therefore, tracing "mm_page_alloc"alone should be enough for the purpose.
# "sys/kernel/tracing" has the priority if exists.
get_trace_base() {
# trace access through debugfs would be obsolete if "/sys/kernel/tracing" is available.
if [ -d "/sys/kernel/tracing" ]; then
echo "/sys/kernel"
else
echo "/sys/kernel/debug"
fi
}
# We want to enable these trace events.
get_want_events() {
echo "module:module_put module:module_load kmem:mm_page_alloc"
}
get_event_filter() {
echo "comm == systemd-udevd || comm == modprobe || comm == insmod"
}
is_trace_ready() {
local trace_base want_events current_events
trace_base=$(get_trace_base)
! [ -f "$trace_base/tracing/trace" ] && return 1
[ "$(cat $trace_base/tracing/tracing_on)" -eq 0 ] && return 1
# Also check if trace events were properly setup.
want_events=$(get_want_events)
current_events=$(echo $(cat $trace_base/tracing/set_event))
[ "$current_events" != "$want_events" ] && return 1
return 0
}
prepare_trace() {
local trace_base
trace_base=$(get_trace_base)
# old debugfs interface case.
if ! [ -d "$trace_base/tracing" ]; then
mount none -t debugfs $trace_base
# new tracefs interface case.
elif ! [ -f "$trace_base/tracing/trace" ]; then
mount none -t tracefs "$trace_base/tracing"
fi
if ! [ -f "$trace_base/tracing/trace" ]; then
echo "WARN: Mount trace failed for kernel module memory analyzing."
return 1
fi
# Active all the wanted trace events.
echo "$(get_want_events)" > $trace_base/tracing/set_event
# There are three kinds of known applications for module loading:
# "systemd-udevd", "modprobe" and "insmod".
# Set them as the global events filter.
# NOTE: Some kernel may not support this format of filter, anyway
# the operation will fail and it doesn't matter.
echo "$(get_event_filter)" > $trace_base/tracing/events/kmem/filter 2>&1
echo "$(get_event_filter)" > $trace_base/tracing/events/module/filter 2>&1
# Set the number of comm-pid if supported.
if [ -f "$trace_base/tracing/saved_cmdlines_size" ]; then
# Thanks to filters, 4096 is big enough(also well supported).
echo 4096 > $trace_base/tracing/saved_cmdlines_size
fi
# Enable and clear trace data for the first time.
echo 1 > $trace_base/tracing/tracing_on
echo > $trace_base/tracing/trace
echo "Prepare trace success."
return 0
}
order_to_pages()
{
local pages=1
local order=$1
while [ "$order" != 0 ]; do
order=$((order-1))
pages=$(($pages*2))
done
echo $pages
}
parse_trace_data() {
local module_name tmp_eval pages
cat "$(get_trace_base)/tracing/trace" | while read pid cpu flags ts function args
do
# Skip comment lines
if [ "$pid" = "#" ]; then
continue
fi
pid=${pid##*-}
function=${function%:}
if [ "$function" = "module_load" ]; then
# One module is being loaded, save the task pid for tracking.
# Remove the trailing after whitespace, there may be the module flags.
module_name=${args%% *}
# Mark current_module to track the task.
eval current_module_$pid="$module_name"
tmp_eval=$(eval echo '${module_loaded_'${module_name}'}')
if [ -n "$tmp_eval" ]; then
echo "WARN: \"$module_name\" was loaded multiple times!"
fi
eval unset module_loaded_$module_name
eval nr_alloc_pages_$module_name=0
continue
fi
module_name=$(eval echo '${current_module_'${pid}'}')
if [ -z "$module_name" ]; then
continue
fi
# Once we get here, the task is being tracked(is loading a module).
if [ "$function" = "module_put" ]; then
# Mark the module as loaded when the first module_put event happens after module_load.
tmp_eval=$(eval echo '${nr_alloc_pages_'${module_name}'}')
echo "$tmp_eval pages consumed by \"$module_name\""
eval module_loaded_$module_name=1
# Module loading finished, so untrack the task.
eval unset current_module_$pid
eval unset nr_alloc_pages_$module_name
continue
fi
if [ "$function" = "mm_page_alloc" ]; then
# Get order first, then convert to actual pages.
pages=$(echo $args | sed -e 's/.*order=\([0-9]*\) .*/\1/')
pages=$(order_to_pages "$pages")
tmp_eval=$(eval echo '${nr_alloc_pages_'${module_name}'}')
eval nr_alloc_pages_$module_name="$(($tmp_eval+$pages))"
fi
done
}
cleanup_trace() {
local trace_base
if is_trace_ready; then
trace_base=$(get_trace_base)
echo 0 > $trace_base/tracing/tracing_on
echo > $trace_base/tracing/trace
echo > $trace_base/tracing/set_event
echo 0 > $trace_base/tracing/events/kmem/filter
echo 0 > $trace_base/tracing/events/module/filter
fi
}
show_usage() {
echo "Find out kernel modules with large memory consumption during loading based on trace."
echo "Usage:"
echo "1) run it first to setup trace."
echo "2) run again to parse the trace data if any."
echo "3) run with \"--cleanup\" option to cleanup trace after use."
}
if [ "$1" = "--help" ]; then
show_usage
exit 0
fi
if [ "$1" = "--cleanup" ]; then
cleanup_trace
exit 0
fi
if is_trace_ready ; then
echo "tracekomem - Rough memory consumption by loading kernel modules (larger value with better accuracy)"
parse_trace_data
else
prepare_trace
fi
exit $?
99base/loginit.sh 0000755 00000001110 15272355667 0007657 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# turn off debugging
set +x
QUIET=$1
printf -- "$$" > /run/initramfs/loginit.pid
[ -e /dev/kmsg ] && exec 5>/dev/kmsg || exec 5>/dev/null
exec 6>/run/initramfs/init.log
while read line; do
if [ "$line" = "DRACUT_LOG_END" ]; then
rm -f -- /run/initramfs/loginit.pipe
exit 0
fi
echo "<31>dracut: $line" >&5
# if "quiet" is specified we output to /dev/console
[ -n "$QUIET" ] || echo "dracut: $line"
echo "$line" >&6
done
99base/parse-root-opts.sh 0000755 00000000544 15272355667 0011302 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
root=$(getarg root=)
rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"
fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
fstype="auto"
fi
99base/dracut-lib.sh 0000755 00000100101 15272355667 0010240 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
export DRACUT_SYSTEMD
export NEWROOT
if [ -n "$NEWROOT" ]; then
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
fi
if ! [ -d /run/initramfs ]; then
mkdir -p -m 0755 /run/initramfs/log
ln -sfn /run/initramfs/log /var/log
fi
[ -d /run/lock ] || mkdir -p -m 0755 /run/lock
[ -d /run/log ] || mkdir -p -m 0755 /run/log
debug_off() {
set +x
}
debug_on() {
[ "$RD_DEBUG" = "yes" ] && set -x
}
# returns OK if $1 contains $2
strstr() {
[ "${1#*$2*}" != "$1" ]
}
# returns OK if $1 contains $2 at the beginning
str_starts() {
[ "${1#$2*}" != "$1" ]
}
# returns OK if $1 contains $2 at the end
str_ends() {
[ "${1%*$2}" != "$1" ]
}
trim() {
local var="$*"
var="${var#"${var%%[![:space:]]*}"}" # remove leading whitespace characters
var="${var%"${var##*[![:space:]]}"}" # remove trailing whitespace characters
echo -n "$var"
}
if [ -z "$DRACUT_SYSTEMD" ]; then
warn() {
check_quiet
echo "<28>dracut Warning: $*" > /dev/kmsg
echo "dracut Warning: $*" >&2
}
info() {
check_quiet
echo "<30>dracut: $*" > /dev/kmsg
[ "$DRACUT_QUIET" != "yes" ] && \
echo "dracut: $*" >&2
}
else
warn() {
echo "Warning: $*" >&2
}
info() {
check_quiet
[ "$DRACUT_QUIET" != "yes" ] && \
echo "$*" >&2
}
fi
vwarn() {
while read line || [ -n "$line" ]; do
warn $line;
done
}
vinfo() {
while read line || [ -n "$line" ]; do
info $line;
done
}
# replaces all occurrences of 'search' in 'str' with 'replacement'
#
# str_replace str search replacement
#
# example:
# str_replace ' one two three ' ' ' '_'
str_replace() {
local in="$1"; local s="$2"; local r="$3"
local out=''
while strstr "${in}" "$s"; do
chop="${in%%$s*}"
out="${out}${chop}$r"
in="${in#*$s}"
done
echo "${out}${in}"
}
killall_proc_mountpoint() {
local _pid
local _t
for _pid in /proc/*; do
_pid=${_pid##/proc/}
case $_pid in
*[!0-9]*) continue;;
esac
[ -e "/proc/$_pid/exe" ] || continue
[ -e "/proc/$_pid/root" ] || continue
strstr "$(ls -l -- "/proc/$_pid" "/proc/$_pid/fd" 2>/dev/null)" "$1" && kill -9 "$_pid"
done
}
getcmdline() {
local _line
local _i
local CMDLINE_ETC_D
local CMDLINE_ETC
local CMDLINE_PROC
unset _line
if [ -e /etc/cmdline ]; then
while read -r _line; do
CMDLINE_ETC="$CMDLINE_ETC $_line";
done </etc/cmdline;
fi
for _i in /etc/cmdline.d/*.conf; do
[ -e "$_i" ] || continue
while read -r _line || [ -n "$_line" ]; do
CMDLINE_ETC_D="$CMDLINE_ETC_D $_line";
done <"$_i";
done
if [ -e /proc/cmdline ]; then
while read -r _line || [ -n "$_line" ]; do
CMDLINE_PROC="$CMDLINE_PROC $_line"
done </proc/cmdline;
CMDLINE="$CMDLINE_ETC_D $CMDLINE_ETC $CMDLINE_PROC"
fi
printf "%s" "$CMDLINE"
}
_dogetarg() {
local _o _val _doecho
unset _val
unset _o
unset _doecho
CMDLINE=$(getcmdline)
for _o in $CMDLINE; do
if [ "${_o%%=*}" = "${1%%=*}" ]; then
if [ -n "${1#*=}" -a "${1#*=*}" != "${1}" ]; then
# if $1 has a "=<value>", we want the exact match
if [ "$_o" = "$1" ]; then
_val="1";
unset _doecho
fi
continue
fi
if [ "${_o#*=}" = "$_o" ]; then
# if cmdline argument has no "=<value>", we assume "=1"
_val="1";
unset _doecho
continue
fi
_val="${_o#*=}"
_doecho=1
fi
done
if [ -n "$_val" ]; then
[ "x$_doecho" != "x" ] && echo "$_val";
return 0;
fi
return 1;
}
getarg() {
debug_off
local _deprecated _newoption
while [ $# -gt 0 ]; do
case $1 in
-d) _deprecated=1; shift;;
-y) if _dogetarg $2 >/dev/null; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption' instead." || warn "Option '$2' is deprecated."
fi
echo 1
debug_on
return 0
fi
_deprecated=0
shift 2;;
-n) if _dogetarg $2 >/dev/null; then
echo 0;
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption=0' instead." || warn "Option '$2' is deprecated."
fi
debug_on
return 1
fi
_deprecated=0
shift 2;;
*) if [ -z "$_newoption" ]; then
_newoption="$1"
fi
if _dogetarg $1; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$1' is deprecated, use '$_newoption' instead." || warn "Option '$1' is deprecated."
fi
debug_on
return 0;
fi
_deprecated=0
shift;;
esac
done
debug_on
return 1
}
# getargbool <defaultval> <args...>
# False if "getarg <args...>" returns "0", "no", or "off".
# True if getarg returns any other non-empty string.
# If not found, assumes <defaultval> - usually 0 for false, 1 for true.
# example: getargbool 0 rd.info
# true: rd.info, rd.info=1, rd.info=xxx
# false: rd.info=0, rd.info=off, rd.info not present (default val is 0)
getargbool() {
local _b
unset _b
local _default
_default="$1"; shift
_b=$(getarg "$@")
[ $? -ne 0 -a -z "$_b" ] && _b="$_default"
if [ -n "$_b" ]; then
[ $_b = "0" ] && return 1
[ $_b = "no" ] && return 1
[ $_b = "off" ] && return 1
fi
return 0
}
isdigit() {
case "$1" in
*[!0-9]*|"") return 1;;
esac
return 0
}
# getargnum <defaultval> <minval> <maxval> <arg>
# Will echo the arg if it's in range [minval - maxval].
# If it's not set or it's not valid, will set it <defaultval>.
# Note all values are required to be >= 0 here.
# <defaultval> should be with [minval -maxval].
getargnum() {
local _b
unset _b
local _default _min _max
_default="$1"; shift
_min="$1"; shift
_max="$1"; shift
_b=$(getarg "$1")
[ $? -ne 0 -a -z "$_b" ] && _b=$_default
if [ -n "$_b" ]; then
isdigit "$_b" && _b=$(($_b)) && \
[ $_b -ge $_min ] && [ $_b -le $_max ] && echo $_b && return
fi
echo $_default
}
_dogetargs() {
debug_off
local _o _found _key
unset _o
unset _found
CMDLINE=$(getcmdline)
_key="$1"
set --
for _o in $CMDLINE; do
if [ "$_o" = "$_key" ]; then
_found=1;
elif [ "${_o%%=*}" = "${_key%=}" ]; then
[ -n "${_o%%=*}" ] && set -- "$@" "${_o#*=}";
_found=1;
fi
done
if [ -n "$_found" ]; then
[ $# -gt 0 ] && printf '%s' "$*"
return 0
fi
return 1;
}
getargs() {
debug_off
local _val _i _args _gfound _deprecated
unset _val
unset _gfound
_newoption="$1"
_args="$@"
set --
for _i in $_args; do
if [ "$i" = "-d" ]; then
_deprecated=1
continue
fi
_val="$(_dogetargs $_i)"
if [ $? -eq 0 ]; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Option '$_i' is deprecated, use '$_newoption' instead." || warn "Option $_i is deprecated!"
fi
_gfound=1
fi
[ -n "$_val" ] && set -- "$@" "$_val"
_deprecated=0
done
if [ -n "$_gfound" ]; then
if [ $# -gt 0 ]; then
printf '%s' "$*"
else
printf 1
fi
debug_on
return 0
fi
debug_on
return 1;
}
# Prints value of given option. If option is a flag and it's present,
# it just returns 0. Otherwise 1 is returned.
# $1 = options separated by commas
# $2 = option we are interested in
#
# Example:
# $1 = cipher=aes-cbc-essiv:sha256,hash=sha256,verify
# $2 = hash
# Output:
# sha256
getoptcomma() {
local line=",$1,"; local opt="$2"; local tmp
case "${line}" in
*,${opt}=*,*)
tmp="${line#*,${opt}=}"
echo "${tmp%%,*}"
return 0
;;
*,${opt},*) return 0;;
esac
return 1
}
# Splits given string 'str' with separator 'sep' into variables 'var1', 'var2',
# 'varN'. If number of fields is less than number of variables, remaining are
# not set. If number of fields is greater than number of variables, the last
# variable takes remaining fields. In short - it acts similary to 'read'.
#
# splitsep sep str var1 var2 varN
#
# example:
# splitsep ':' 'foo:bar:baz' v1 v2
# in result:
# v1='foo', v2='bar:baz'
#
# TODO: ':' inside fields.
splitsep() {
debug_off
local sep="$1"; local str="$2"; shift 2
local tmp
while [ -n "$str" -a "$#" -gt 1 ]; do
tmp="${str%%$sep*}"
printf -v "$1" '%s' "$tmp"
str="${str#"$tmp"}"
str="${str#$sep}"
shift
done
[ -n "$str" -a -n "$1" ] && printf -v "$1" '%s' "$str"
debug_on
return 0
}
setdebug() {
[ -f /etc/initrd-release ] || return
if [ -z "$RD_DEBUG" ]; then
if [ -e /proc/cmdline ]; then
RD_DEBUG=no
if getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
RD_DEBUG=yes
[ -n "$BASH" ] && \
export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
fi
fi
export RD_DEBUG
fi
debug_on
}
setdebug
source_all() {
local f
local _dir
_dir=$1; shift
[ "$_dir" ] && [ -d "/$_dir" ] || return
for f in "/$_dir"/*.sh; do [ -e "$f" ] && . "$f" "$@"; done
}
hookdir=/lib/dracut/hooks
export hookdir
source_hook() {
local _dir
_dir=$1; shift
source_all "/lib/dracut/hooks/$_dir" "$@"
}
check_finished() {
local f
for f in $hookdir/initqueue/finished/*.sh; do
[ "$f" = "$hookdir/initqueue/finished/*.sh" ] && return 0
{ [ -e "$f" ] && ( . "$f" ) ; } || return 1
done
return 0
}
source_conf() {
local f
[ "$1" ] && [ -d "/$1" ] || return
for f in "/$1"/*.conf; do [ -e "$f" ] && . "$f"; done
}
die() {
{
echo "<24>dracut: FATAL: $*";
echo "<24>dracut: Refusing to continue";
} > /dev/kmsg
{
printf 'warn dracut: FATAL: %q\n' "$*";
echo "warn dracut: Refusing to continue";
} >> $hookdir/emergency/01-die.sh
[ -d /run/initramfs ] || mkdir -p -- /run/initramfs
> /run/initramfs/.die
getargbool 0 "rd.debug=" && emergency_shell
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl --no-block --force halt
fi
exit 1
}
check_quiet() {
if [ -z "$DRACUT_QUIET" ]; then
DRACUT_QUIET="yes"
getargbool 0 rd.info -d -y rdinfo && DRACUT_QUIET="no"
getargbool 0 rd.debug -d -y rdinitdebug && DRACUT_QUIET="no"
if [ -z "$DRACUT_SYSTEMD" ]; then
getarg quiet || DRACUT_QUIET="yes"
a=$(getarg loglevel=)
[ -n "$a" ] && [ $a -ge 28 ] && DRACUT_QUIET="yes"
fi
export DRACUT_QUIET
fi
}
check_occurances() {
# Count the number of times the character $ch occurs in $str
# Return 0 if the count matches the expected number, 1 otherwise
local str="$1"
local ch="$2"
local expected="$3"
local count=0
while [ "${str#*$ch}" != "${str}" ]; do
str="${str#*$ch}"
count=$(( $count + 1 ))
done
[ $count -eq $expected ]
}
incol2() {
debug_off
local dummy check;
local file="$1";
local str="$2";
[ -z "$file" ] && return 1;
[ -z "$str" ] && return 1;
while read dummy check restofline; do
if [ "$check" = "$str" ]; then
debug_on
return 0
fi
done < $file
debug_on
return 1
}
udevsettle() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version)
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=$hookdir/initqueue/work $settle_exit_if_exists
else
udevadm settle --timeout=30
fi
}
udevproperty() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version)
if [ $UDEVVERSION -ge 143 ]; then
for i in "$@"; do udevadm control --property=$i; done
else
for i in "$@"; do udevadm control --env=$i; done
fi
}
find_mount() {
local dev mnt etc wanted_dev
wanted_dev="$(readlink -e -q $1)"
while read dev mnt etc; do
[ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
done < /proc/mounts
return 1
}
# usage: ismounted <mountpoint>
# usage: ismounted /dev/<device>
if command -v findmnt >/dev/null; then
ismounted() {
findmnt "$1" > /dev/null 2>&1
}
else
ismounted() {
if [ -b "$1" ]; then
find_mount "$1" > /dev/null && return 0
return 1
fi
while read a m a; do
[ "$m" = "$1" ] && return 0
done < /proc/mounts
return 1
}
fi
# root=nfs:[<server-ip>:]<root-dir>[:<nfs-options>]
# root=nfs4:[<server-ip>:]<root-dir>[:<nfs-options>]
nfsroot_to_var() {
# strip nfs[4]:
local arg="$@:"
nfs="${arg%%:*}"
arg="${arg##$nfs:}"
# check if we have a server
if strstr "$arg" ':/*' ; then
server="${arg%%:/*}"
arg="/${arg##*:/}"
fi
path="${arg%%:*}"
# rest are options
options="${arg##$path}"
# strip leading ":"
options="${options##:}"
# strip ":"
options="${options%%:}"
# Does it really start with '/'?
[ -n "${path%%/*}" ] && path="error";
#Fix kernel legacy style separating path and options with ','
if [ "$path" != "${path#*,}" ] ; then
options=${path#*,}
path=${path%%,*}
fi
}
# Create udev rule match for a device with its device name, or the udev property
# ID_FS_UUID or ID_FS_LABEL
#
# example:
# udevmatch LABEL=boot
# prints:
# ENV{ID_FS_LABEL}="boot"
#
# TOOD: symlinks
udevmatch() {
case "$1" in
UUID=????????-????-????-????-????????????|LABEL=*|PARTLABEL=*|PARTUUID=????????-????-????-????-????????????)
printf 'ENV{ID_FS_%s}=="%s"' "${1%%=*}" "${1#*=}"
;;
UUID=*)
printf 'ENV{ID_FS_UUID}=="%s*"' "${1#*=}"
;;
PARTUUID=*)
printf 'ENV{ID_FS_PARTUUID}=="%s*"' "${1#*=}"
;;
/dev/?*) printf -- 'KERNEL=="%s"' "${1#/dev/}" ;;
*) return 255 ;;
esac
}
# Prints unique path for potential file inside specified directory. It consists
# of specified directory, prefix and number at the end which is incremented
# until non-existing file is found.
#
# funiq dir prefix
#
# example:
# # ls /mnt
# cdrom0 cdrom1
#
# # funiq /mnt cdrom
# /mnt/cdrom2
funiq() {
local dir="$1"; local prefix="$2"
local i=0
[ -d "${dir}" ] || return 1
while [ -e "${dir}/${prefix}$i" ]; do
i=$(($i+1)) || return 1
done
echo "${dir}/${prefix}$i"
}
# Creates unique directory and prints its path. It's using funiq to generate
# path.
#
# mkuniqdir subdir new_dir_name
mkuniqdir() {
local dir="$1"; local prefix="$2"
local retdir; local retdir_new
[ -d "${dir}" ] || mkdir -m 0755 -p "${dir}" || return 1
retdir=$(funiq "${dir}" "${prefix}") || return 1
until mkdir -m 0755 "${retdir}" 2>/dev/null; do
retdir_new=$(funiq "${dir}" "${prefix}") || return 1
[ "$retdir_new" = "$retdir" ] && return 1
retdir="$retdir_new"
done
echo "${retdir}"
}
# Copy the contents of SRC into DEST, merging the contents of existing
# directories (kinda like rsync, or cpio -p).
# Creates DEST if it doesn't exist. Overwrites files with the same names.
#
# copytree SRC DEST
copytree() {
local src="$1" dest="$2"
mkdir -p "$dest"; dest=$(readlink -e -q "$dest")
( cd "$src"; cp -af . -t "$dest" )
}
# Evaluates command for UUIDs either given as arguments for this function or all
# listed in /dev/disk/by-uuid. UUIDs doesn't have to be fully specified. If
# beginning is given it is expanded to all matching UUIDs. To pass full UUID to
# your command use '$___' as a place holder. Remember to escape '$'!
#
# foreach_uuid_until [ -p prefix ] command UUIDs
#
# prefix - string to put just before $___
# command - command to be evaluated
# UUIDs - list of UUIDs separated by space
#
# The function returns after *first successful evaluation* of the given command
# with status 0. If evaluation fails for every UUID function returns with
# status 1.
#
# Example:
# foreach_uuid_until "mount -U \$___ /mnt; echo OK; umount /mnt" \
# "01234 f512 a235567f-12a3-c123-a1b1-01234567abcb"
foreach_uuid_until() (
cd /dev/disk/by-uuid
[ "$1" = -p ] && local prefix="$2" && shift 2
local cmd="$1"; shift; local uuids_list="$*"
local uuid; local full_uuid; local ___
[ -n "${cmd}" ] || return 1
for uuid in ${uuids_list:-*}; do
for full_uuid in ${uuid}*; do
[ -e "${full_uuid}" ] || continue
___="${prefix}${full_uuid}"
eval ${cmd} && return 0
done
done
return 1
)
# Get kernel name for given device. Device may be the name too (then the same
# is returned), a symlink (full path), UUID (prefixed with "UUID=") or label
# (prefixed with "LABEL="). If just a beginning of the UUID is specified or
# even an empty, function prints all device names which UUIDs match - every in
# single line.
#
# NOTICE: The name starts with "/dev/".
#
# Example:
# devnames UUID=123
# May print:
# /dev/dm-1
# /dev/sdb1
# /dev/sdf3
devnames() {
local dev="$1"; local d; local names
case "$dev" in
UUID=*)
dev="$(foreach_uuid_until '! blkid -U $___' "${dev#UUID=}")" \
&& return 255
[ -z "$dev" ] && return 255
;;
LABEL=*) dev="$(blkid -L "${dev#LABEL=}")" || return 255 ;;
/dev/?*) ;;
*) return 255 ;;
esac
for d in $dev; do
names="$names
$(readlink -e -q "$d")" || return 255
done
echo "${names#
}"
}
usable_root() {
local _i
[ -d "$1" ] || return 1
for _i in "$1"/usr/lib*/ld-*.so "$1"/lib*/ld-*.so; do
[ -e "$_i" ] && return 0
done
for _i in proc sys dev; do
[ -e "$1"/$_i ] || return 1
done
return 0
}
inst_hook() {
local _hookname _unique _name _job _exe
while [ $# -gt 0 ]; do
case "$1" in
--hook)
_hookname="/$2";shift;;
--unique)
_unique="yes";;
--name)
_name="$2";shift;;
*)
break;;
esac
shift
done
if [ -z "$_unique" ]; then
_job="${_name}$$"
else
_job="${_name:-$1}"
_job=${_job##*/}
fi
_exe=$1
shift
[ -x "$_exe" ] || _exe=$(command -v $_exe)
if [ -n "$onetime" ]; then
{
echo '[ -e "$_job" ] && rm -f -- "$_job"'
echo "$_exe $@"
} > "/tmp/$$-${_job}.sh"
else
echo "$_exe $@" > "/tmp/$$-${_job}.sh"
fi
mv -f "/tmp/$$-${_job}.sh" "$hookdir/${_hookname}/${_job}.sh"
}
# inst_mount_hook <mountpoint> <prio> <name> <script>
#
# Install a mount hook with priority <prio>,
# which executes <script> as soon as <mountpoint> is mounted.
inst_mount_hook() {
local _prio="$2" _jobname="$3" _script="$4"
local _hookname="mount-$(str_replace "$1" '/' '\\x2f')"
[ -d "$hookdir/${_hookname}" ] || mkdir -p "$hookdir/${_hookname}"
inst_hook --hook "$_hookname" --unique --name "${_prio}-${_jobname}" "$_script"
}
# add_mount_point <dev> <mountpoint> <filesystem> <fsopts>
#
# Mount <dev> on <mountpoint> with <filesystem> and <fsopts>
# and call any mount hooks, as soon, as it is mounted
add_mount_point() {
local _dev="$1" _mp="$2" _fs="$3" _fsopts="$4"
local _hookname="mount-$(str_replace "$2" '/' '\\x2f')"
local _devname="dev-$(str_replace "$1" '/' '\\x2f')"
echo "$_dev $_mp $_fs $_fsopts 0 0" >> /etc/fstab
exec 7>/etc/udev/rules.d/99-mount-${_devname}.rules
echo 'SUBSYSTEM!="block", GOTO="mount_end"' >&7
echo 'ACTION!="add|change", GOTO="mount_end"' >&7
if [ -n "$_dev" ]; then
udevmatch "$_dev" >&7 || {
warn "add_mount_point dev=$_dev incorrect!"
continue
}
printf ', ' >&7
fi
{
printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue)
printf -- '--name mount-%%k '
printf -- '%s %s"\n' "$(command -v mount_hook)" "${_mp}"
} >&7
echo 'LABEL="mount_end"' >&7
exec 7>&-
}
# wait_for_mount <mountpoint>
#
# Installs a initqueue-finished script,
# which will cause the main loop only to exit,
# if <mountpoint> is mounted.
wait_for_mount()
{
local _name
_name="$(str_replace "$1" '/' '\\x2f')"
printf '. /lib/dracut-lib.sh\nismounted "%s"\n' $1 \
>> "$hookdir/initqueue/finished/ismounted-${_name}.sh"
{
printf 'ismounted "%s" || ' $1
printf 'warn "\"%s\" is not mounted"\n' $1
} >> "$hookdir/emergency/90-${_name}.sh"
}
# get a systemd-compatible unit name from a path
# (mimicks unit_name_from_path_instance())
dev_unit_name()
{
local dev="$1"
if command -v systemd-escape >/dev/null; then
systemd-escape -p -- "$dev"
return
fi
if [ "$dev" = "/" -o -z "$dev" ]; then
printf -- "-"
exit 0
fi
dev="${1%%/}"
dev="${dev##/}"
dev="$(str_replace "$dev" '\' '\x5c')"
dev="$(str_replace "$dev" '-' '\x2d')"
if [ "${dev##.}" != "$dev" ]; then
dev="\x2e${dev##.}"
fi
dev="$(str_replace "$dev" '/' '-')"
printf -- "%s" "$dev"
}
# wait_for_dev <dev>
#
# Installs a initqueue-finished script,
# which will cause the main loop only to exit,
# if the device <dev> is recognized by the system.
wait_for_dev()
{
local _name
local _needreload
local _noreload
local _timeout
if [ "$1" = "-n" ]; then
_noreload=1
shift
fi
_name="$(str_replace "$1" '/' '\x2f')"
[ -e "${PREFIX}$hookdir/initqueue/finished/devexists-${_name}.sh" ] && return 0
printf '[ -e "%s" ]\n' $1 \
>> "${PREFIX}$hookdir/initqueue/finished/devexists-${_name}.sh"
{
printf '[ -e "%s" ] || ' $1
printf 'warn "\"%s\" does not exist"\n' $1
} >> "${PREFIX}$hookdir/emergency/80-${_name}.sh"
if [ -n "$DRACUT_SYSTEMD" ]; then
_name=$(dev_unit_name "$1")
if ! [ -L ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device ]; then
[ -d ${PREFIX}/etc/systemd/system/initrd.target.wants ] || mkdir -p ${PREFIX}/etc/systemd/system/initrd.target.wants
ln -s ../${_name}.device ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device
_needreload=1
fi
if ! [ -f ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf ]; then
_timeout=$(getarg rd.device.timeout || printf "0")
mkdir -p ${PREFIX}/etc/systemd/system/${_name}.device.d
{
echo "[Unit]"
echo "JobTimeoutSec=$_timeout"
} > ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf
_needreload=1
fi
if [ -z "$PREFIX" ] && [ "$_needreload" = 1 ] && [ -z "$_noreload" ]; then
/sbin/initqueue --onetime --unique --name daemon-reload systemctl daemon-reload
fi
fi
}
cancel_wait_for_dev()
{
local _name
_name="$(str_replace "$1" '/' '\x2f')"
rm -f -- "$hookdir/initqueue/finished/devexists-${_name}.sh"
rm -f -- "$hookdir/emergency/80-${_name}.sh"
if [ -n "$DRACUT_SYSTEMD" ]; then
_name=$(dev_unit_name "$1")
rm -f -- ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device
rm -f -- ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf
/sbin/initqueue --onetime --unique --name daemon-reload systemctl daemon-reload
fi
}
killproc() {
debug_off
local _exe="$(command -v $1)"
local _sig=$2
local _i
[ -x "$_exe" ] || return 1
for _i in /proc/[0-9]*; do
[ "$_i" = "/proc/1" ] && continue
if [ -e "$_i"/_exe ] && [ "$_i/_exe" -ef "$_exe" ] ; then
kill $_sig ${_i##*/}
fi
done
debug_on
}
need_shutdown() {
>/run/initramfs/.need_shutdown
}
wait_for_loginit()
{
[ "$RD_DEBUG" = "yes" ] || return
[ -e /run/initramfs/loginit.pipe ] || return
debug_off
echo "DRACUT_LOG_END"
exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
# wait for loginit
i=0
while [ $i -lt 10 ]; do
if [ ! -e /run/initramfs/loginit.pipe ]; then
j=$(jobs)
[ -z "$j" ] && break
[ -z "${j##*Running*}" ] || break
fi
sleep 0.1
i=$(($i+1))
done
if [ $i -eq 10 ]; then
kill %1 >/dev/null 2>&1
kill $(while read line;do echo $line;done</run/initramfs/loginit.pid)
fi
setdebug
rm -f -- /run/initramfs/loginit.pipe /run/initramfs/loginit.pid
}
# pidof version for root
if ! command -v pidof >/dev/null 2>/dev/null; then
pidof() {
debug_off
local _cmd
local _exe
local _rl
local _ret=1
local i
_cmd="$1"
if [ -z "$_cmd" ]; then
debug_on
return 1
fi
_exe=$(type -P "$1")
for i in /proc/*/exe; do
[ -e "$i" ] || continue
if [ -n "$_exe" ]; then
[ "$i" -ef "$_exe" ] || continue
else
_rl=$(readlink -f "$i");
[ "${_rl%/$_cmd}" != "$_rl" ] || continue
fi
i=${i%/exe}
echo ${i##/proc/}
_ret=0
done
debug_on
return $_ret
}
fi
_emergency_shell()
{
local _name="$1"
if [ -n "$DRACUT_SYSTEMD" ]; then
> /.console_lock
echo "PS1=\"$_name:\\\${PWD}# \"" >/etc/profile
systemctl start dracut-emergency.service
rm -f -- /etc/profile
rm -f -- /.console_lock
else
debug_off
echo
/sbin/rdsosreport
echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot'
echo 'after mounting them and attach it to a bug report.'
if ! RD_DEBUG= getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
echo
echo 'To get more debug information in the report,'
echo 'reboot with "rd.debug" added to the kernel command line.'
fi
echo
echo 'Dropping to debug shell.'
echo
export PS1="$_name:\${PWD}# "
[ -e /.profile ] || >/.profile
_ctty="$(RD_DEBUG= getarg rd.ctty=)" && _ctty="/dev/${_ctty##*/}"
if [ -z "$_ctty" ]; then
_ctty=console
while [ -f /sys/class/tty/$_ctty/active ]; do
_ctty=$(cat /sys/class/tty/$_ctty/active)
_ctty=${_ctty##* } # last one in the list
done
_ctty=/dev/$_ctty
fi
[ -c "$_ctty" ] || _ctty=/dev/tty1
case "$(/usr/bin/setsid --help 2>&1)" in *--ctty*) CTTY="--ctty";; esac
setsid $CTTY /bin/sh -i -l 0<>$_ctty 1<>$_ctty 2<>$_ctty
fi
}
emergency_shell()
{
local _ctty
set +e
local _rdshell_name="dracut" action="Boot" hook="emergency"
local _emergency_action
if [ "$1" = "-n" ]; then
_rdshell_name=$2
shift 2
elif [ "$1" = "--shutdown" ]; then
_rdshell_name=$2; action="Shutdown"; hook="shutdown-emergency"
if type plymouth >/dev/null 2>&1; then
plymouth --hide-splash
elif [ -x /oldroot/bin/plymouth ]; then
/oldroot/bin/plymouth --hide-splash
fi
shift 2
fi
echo ; echo
warn "$*"
source_hook "$hook"
echo
_emergency_action=$(getarg rd.emergency)
[ -z "$_emergency_action" ] \
&& [ -e /run/initramfs/.die ] \
&& _emergency_action=halt
if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then
_emergency_shell $_rdshell_name
else
warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line."
[ -z "$_emergency_action" ] && _emergency_action=halt
fi
case "$_emergency_action" in
reboot)
reboot || exit 1;;
poweroff)
poweroff || exit 1;;
halt)
halt || exit 1;;
esac
}
action_on_fail()
{
if [ -f "$initdir/lib/dracut/no-emergency-shell" ]; then
[ "$1" = "-n" ] && shift 2
[ "$1" = "--shutdown" ] && shift 2
warn "$*"
warn "Not dropping to emergency shell, because $initdir/lib/dracut/no-emergency-shell exists."
return 0
fi
emergency_shell $@
return 1
}
# Retain the values of these variables but ensure that they are unexported
export_n()
{
local var
local val
for var in "$@"; do
val="${!var}"
unset "$var"
[ -n "$val" ] && printf -v "$var" '%s' "$val"
done
}
# returns OK if list1 contains all elements of list2, i.e. checks if list2 is a
# sublist of list1. An order and a duplication doesn't matter.
#
# $1 = separator
# $2 = list1
# $3 = list2
# $4 = ignore values, separated by $1
listlist() {
local _sep="$1"
local _list="${_sep}${2}${_sep}"
local _sublist="$3"
[ -n "$4" ] && local _iglist="${_sep}${4}${_sep}"
local IFS="$_sep"
local _v
[ "$_list" = "$_sublist" ] && return 0
for _v in $_sublist; do
if [ -n "$_v" ] && ! ( [ -n "$_iglist" ] && strstr "$_iglist" "$_v" )
then
strstr "$_list" "$_v" || return 1
fi
done
return 0
}
# returns OK if both lists contain the same values. An order and a duplication
# doesn't matter.
#
# $1 = separator
# $2 = list1
# $3 = list2
# $4 = ignore values, separated by $1
are_lists_eq() {
listlist "$1" "$2" "$3" "$4" && listlist "$1" "$3" "$2" "$4"
}
setmemdebug() {
if [ -z "$DEBUG_MEM_LEVEL" ]; then
export DEBUG_MEM_LEVEL=$(getargnum 0 0 4 rd.memdebug)
fi
}
setmemdebug
cleanup_trace_mem()
{
# tracekomem based on kernel trace needs cleanup after use.
if [ "$DEBUG_MEM_LEVEL" -eq 4 ]; then
tracekomem --cleanup
fi
}
# parameters: msg [trace_level:trace]...
make_trace_mem()
{
local msg
msg="$1"
shift
if [ -n "$DEBUG_MEM_LEVEL" ] && [ "$DEBUG_MEM_LEVEL" -gt 0 ]; then
make_trace show_memstats $DEBUG_MEM_LEVEL "[debug_mem]" "$msg" "$@" >&2
fi
}
# parameters: func log_level prefix msg [trace_level:trace]...
make_trace()
{
local func log_level prefix msg msg_printed
local trace trace_level trace_in_higher_levels insert_trace
func=$1
shift
log_level=$1
shift
prefix=$1
shift
msg=$1
shift
if [ -z "$log_level" ]; then
return
fi
msg=$(echo $msg)
msg_printed=0
while [ $# -gt 0 ]; do
trace=${1%%:*}
trace_level=${trace%%+}
[ "$trace" != "$trace_level" ] && trace_in_higher_levels="yes"
trace=${1##*:}
if [ -z "$trace_level" ]; then
trace_level=0
fi
insert_trace=0
if [ -n "$trace_in_higher_levels" ]; then
if [ "$log_level" -ge "$trace_level" ]; then
insert_trace=1
fi
else
if [ "$log_level" -eq "$trace_level" ]; then
insert_trace=1
fi
fi
if [ $insert_trace -eq 1 ]; then
if [ $msg_printed -eq 0 ]; then
echo "$prefix $msg"
msg_printed=1
fi
$func $trace
fi
shift
done
}
# parameters: type
show_memstats()
{
case $1 in
shortmem)
cat /proc/meminfo | grep -e "^MemFree" -e "^Cached" -e "^Slab"
;;
mem)
cat /proc/meminfo
;;
slab)
cat /proc/slabinfo
;;
iomem)
cat /proc/iomem
;;
komem)
tracekomem
;;
esac
}
99base/module-setup.sh 0000755 00000007426 15272355670 0010647 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 0
}
depends() {
echo udev-rules
return 0
}
install() {
local _d
inst_multiple mount mknod mkdir sleep chroot \
sed ls flock cp mv dmesg rm ln rmmod mkfifo umount readlink setsid
inst $(command -v modprobe) /sbin/modprobe
inst_multiple -o findmnt less kmod
if [ ! -e "${initdir}/bin/sh" ]; then
inst_multiple bash
(ln -s bash "${initdir}/bin/sh" || :)
fi
#add common users in /etc/passwd, it will be used by nfs/ssh currently
egrep '^root:' "$initdir/etc/passwd" 2>/dev/null || echo 'root:x:0:0::/root:/bin/sh' >> "$initdir/etc/passwd"
egrep '^nobody:' /etc/passwd >> "$initdir/etc/passwd"
# install our scripts and hooks
inst_script "$moddir/init.sh" "/init"
inst_script "$moddir/initqueue.sh" "/sbin/initqueue"
inst_script "$moddir/loginit.sh" "/sbin/loginit"
inst_script "$moddir/rdsosreport.sh" "/sbin/rdsosreport"
inst_script "$moddir/memtrace-ko.sh" "/sbin/tracekomem"
[ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib
mkdir -m 0755 -p ${initdir}/lib/dracut
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks
mkdir -p ${initdir}/tmp
inst_simple "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh"
if ! dracut_module_included "systemd"; then
inst_multiple switch_root || dfatal "Failed to install switch_root"
inst_hook cmdline 10 "$moddir/parse-root-opts.sh"
fi
mkdir -p "${initdir}/var"
if ! dracut_module_included "systemd"; then
inst_multiple -o $systemdutildir/systemd-timestamp
fi
if [[ $realinitpath ]]; then
for i in $realinitpath; do
echo "rd.distroinit=$i"
done > "${initdir}/etc/cmdline.d/distroinit.conf"
fi
ln -fs /proc/self/mounts "$initdir/etc/mtab"
if [[ $ro_mnt = yes ]]; then
echo ro >> "${initdir}/etc/cmdline.d/base.conf"
fi
if [ -e /etc/os-release ]; then
. /etc/os-release
VERSION+=" "
PRETTY_NAME+=" "
else
VERSION=""
PRETTY_NAME=""
fi
NAME=dracut
ID=dracut
VERSION+="dracut-$DRACUT_VERSION"
PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
VERSION_ID=$DRACUT_VERSION
ANSI_COLOR="0;34"
{
echo NAME=\"$NAME\"
echo VERSION=\"$VERSION\"
echo ID=$ID
echo VERSION_ID=$VERSION_ID
echo PRETTY_NAME=\"$PRETTY_NAME\"
echo ANSI_COLOR=\"$ANSI_COLOR\"
} > $initdir/etc/initrd-release
echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
ln -sf initrd-release $initdir/etc/os-release
## save host_devs which we need bring up
if [[ $hostonly_cmdline == "yes" ]]; then
if [[ -f "$initdir/lib/dracut/need-initqueue" ]] || ! dracut_module_included "systemd"; then
(
if dracut_module_included "systemd"; then
DRACUT_SYSTEMD=1
fi
PREFIX="$initdir"
. "$moddir/dracut-lib.sh"
for _dev in "${host_devs[@]}"; do
[[ "$_dev" == "$root_dev" ]] && continue
# We only actually wait for real devs - swap is only needed
# for resume and udev rules generated when parsing resume=
# argument take care of the waiting for us
for _dev2 in "${swap_devs[@]}"; do
[[ "$_dev" == "$_dev2" ]] && continue 2
done
_pdev=$(get_persistent_dev $_dev)
case "$_pdev" in
/dev/?*) wait_for_dev $_pdev;;
*) ;;
esac
done
)
fi
fi
}
99base/rdsosreport.sh 0000755 00000001656 15272355670 0010611 0 ustar 00 #!/bin/sh
echo 'Generating "/run/initramfs/rdsosreport.txt"'
[ -d /run/initramfs ] || mkdir -p /run/initramfs
exec >/run/initramfs/rdsosreport.txt 2>&1
set -x
cat /lib/dracut/dracut-*
cat /proc/cmdline
[ -f /etc/cmdline ] && cat /etc/cmdline
for _i in /etc/cmdline.d/*.conf; do
[ -f "$_i" ] || break
echo $_i
cat $_i
done
cat /proc/self/mountinfo
cat /proc/mounts
blkid
blkid -o udev
ls -l /dev/disk/by*
for _i in /etc/conf.d/*.conf; do
[ -f "$_i" ] || break
echo $_i
cat $_i
done
if command -v lvm >/dev/null 2>/dev/null; then
lvm pvdisplay
lvm vgdisplay
lvm lvdisplay
fi
command -v dmsetup >/dev/null 2>/dev/null && dmsetup ls --tree
cat /proc/mdstat
command -v ip >/dev/null 2>/dev/null && ip addr
if command -v journalctl >/dev/null 2>/dev/null; then
journalctl -ab --no-pager -o short-monotonic
else
dmesg
[ -f /run/initramfs/init.log ] && cat /run/initramfs/init.log
fi
99base/initqueue.sh 0000755 00000002270 15272355670 0010224 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Licensed under the GPLv2+
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
while [ $# -gt 0 ]; do
case "$1" in
--onetime)
onetime="yes";;
--online)
qname="/online";;
--settled)
qname="/settled";;
--finished)
qname="/finished";;
--timeout)
qname="/timeout";;
--unique)
unique="yes";;
--name)
name="$2";shift;;
--env)
env="$2"; shift;;
*)
break;;
esac
shift
done
if [ -z "$unique" ]; then
job="${name}$$"
else
job="${name:-$1}"
job=${job##*/}
fi
exe=$1
shift
[ -x "$exe" ] || exe=$(command -v $exe)
{
[ -n "$onetime" ] && echo '[ -e "$job" ] && rm -f -- "$job"'
[ -n "$env" ] && echo "$env"
echo "$exe" "$@"
} > "/tmp/$$-${job}.sh"
mv -f "/tmp/$$-${job}.sh" "$hookdir/initqueue${qname}/${job}.sh"
[ -z "$qname" ] && >> $hookdir/initqueue/work
exit 0
99base/init.sh 0000755 00000026313 15272355670 0007163 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Licensed under the GPLv2
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
# Jeremy Katz <katzj@redhat.com>
export -p > /tmp/export.orig
NEWROOT="/sysroot"
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
OLDPATH=$PATH
PATH=/usr/sbin:/usr/bin:/sbin:/bin
export PATH
# mount some important things
[ ! -d /proc/self ] && \
mount -t proc -o nosuid,noexec,nodev proc /proc >/dev/null
if [ "$?" != "0" ]; then
echo "Cannot mount proc on /proc! Compile the kernel with CONFIG_PROC_FS!"
exit 1
fi
[ ! -d /sys/kernel ] && \
mount -t sysfs -o nosuid,noexec,nodev sysfs /sys >/dev/null
if [ "$?" != "0" ]; then
echo "Cannot mount sysfs on /sys! Compile the kernel with CONFIG_SYSFS!"
exit 1
fi
RD_DEBUG=""
. /lib/dracut-lib.sh
setdebug
if ! ismounted /dev; then
mount -t devtmpfs -o mode=0755,nosuid,strictatime devtmpfs /dev >/dev/null
fi
if ! ismounted /dev; then
echo "Cannot mount devtmpfs on /dev! Compile the kernel with CONFIG_DEVTMPFS!"
exit 1
fi
# prepare the /dev directory
[ ! -h /dev/fd ] && ln -s /proc/self/fd /dev/fd >/dev/null 2>&1
[ ! -h /dev/stdin ] && ln -s /proc/self/fd/0 /dev/stdin >/dev/null 2>&1
[ ! -h /dev/stdout ] && ln -s /proc/self/fd/1 /dev/stdout >/dev/null 2>&1
[ ! -h /dev/stderr ] && ln -s /proc/self/fd/2 /dev/stderr >/dev/null 2>&1
if ! ismounted /dev/pts; then
mkdir -m 0755 /dev/pts
mount -t devpts -o gid=5,mode=620,noexec,nosuid devpts /dev/pts >/dev/null
fi
if ! ismounted /dev/shm; then
mkdir -m 0755 /dev/shm
mount -t tmpfs -o mode=1777,nosuid,nodev,strictatime tmpfs /dev/shm >/dev/null
fi
if ! ismounted /run; then
mkdir -m 0755 /newrun
mount -t tmpfs -o mode=0755,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
cp -a /run/* /newrun >/dev/null 2>&1
mount --move /newrun /run
rm -fr -- /newrun
fi
if command -v kmod >/dev/null 2>/dev/null; then
kmod static-nodes --format=tmpfiles 2>/dev/null | \
while read type file mode a a a majmin; do
case $type in
d)
mkdir -m $mode -p $file
;;
c)
mknod -m $mode $file $type ${majmin%:*} ${majmin#*:}
;;
esac
done
fi
trap "action_on_fail Signal caught!" 0
[ -d /run/initramfs ] || mkdir -p -m 0755 /run/initramfs
[ -d /run/log ] || mkdir -p -m 0755 /run/log
export UDEVVERSION=$(udevadm --version)
if [ $UDEVVERSION -gt 166 ]; then
# newer versions of udev use /run/udev/rules.d
export UDEVRULESD=/run/udev/rules.d
[ -d /run/udev ] || mkdir -p -m 0755 /run/udev
[ -d $UDEVRULESD ] || mkdir -p -m 0755 $UDEVRULESD
else
mkdir -m 0755 /dev/.udev /dev/.udev/rules.d
export UDEVRULESD=/dev/.udev/rules.d
fi
if [ "$RD_DEBUG" = "yes" ]; then
mkfifo /run/initramfs/loginit.pipe
loginit $DRACUT_QUIET </run/initramfs/loginit.pipe >/dev/console 2>&1 &
exec >/run/initramfs/loginit.pipe 2>&1
else
exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
fi
[ -f /etc/initrd-release ] && . /etc/initrd-release
[ -n "$VERSION_ID" ] && info "$NAME-$VERSION_ID"
source_conf /etc/conf.d
if getarg "rd.cmdline=ask"; then
echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
while read -p "> " line; do
[ "$line" = "." ] && break
echo "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
done
fi
# run scriptlets to parse the command line
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab' '4+:komem'
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -z "$root" ] && die "No or empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
export root rflags fstype netroot NEWROOT
# pre-udev scripts run before udev starts, and are run only once.
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-udev' -d 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break before pre-udev"
source_hook pre-udev
# start up udev and trigger cold plugs
$systemdutildir/systemd-udevd --daemon --resolve-names=never
UDEV_LOG_PRIO_ARG=--log-priority
UDEV_QUEUE_EMPTY="udevadm settle --timeout=0"
if [ $UDEVVERSION -lt 140 ]; then
UDEV_LOG_PRIO_ARG=--log_priority
UDEV_QUEUE_EMPTY="udevadm settle --timeout=1"
fi
getargbool 0 rd.udev.info -d -y rdudevinfo && udevadm control "$UDEV_LOG_PRIO_ARG=info"
getargbool 0 rd.udev.debug -d -y rdudevdebug && udevadm control "$UDEV_LOG_PRIO_ARG=debug"
udevproperty "hookdir=$hookdir"
make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
getarg 'rd.break=pre-trigger' -d 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break before pre-trigger"
source_hook pre-trigger
udevadm control --reload >/dev/null 2>&1 || :
# then the rest
udevadm trigger --type=subsystems --action=add >/dev/null 2>&1
udevadm trigger --type=devices --action=add >/dev/null 2>&1
make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"
RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-30}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do
check_finished && break
udevsettle
check_finished && break
if [ -f $hookdir/initqueue/work ]; then
rm -f -- $hookdir/initqueue/work
fi
for job in $hookdir/initqueue/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue
for job in $hookdir/initqueue/settled/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue
# no more udev jobs and queues empty.
sleep 0.5
if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
for job in $hookdir/initqueue/timeout/*.sh; do
[ -e "$job" ] || break
job=$job . $job
udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
[ -f $hookdir/initqueue/work ] && main_loop=0
done
fi
main_loop=$(($main_loop+1))
[ $main_loop -gt $RDRETRY ] \
&& { flock -s 9 ; action_on_fail "Could not boot."; } 9>/.console_lock \
&& break
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY
# pre-mount happens before we try to mount the root filesystem,
# and happens once.
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
getarg 'rd.break=pre-mount' -d 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
_i_mount=0
while :; do
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
umount "$NEWROOT"
fi
for f in $hookdir/mount/*.sh; do
[ -f "$f" ] && . "$f"
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
umount "$NEWROOT"
rm -f -- "$f"
fi
done
_i_mount=$(($_i_mount+1))
[ $_i_mount -gt 20 ] \
&& { flock -s 9 ; action_on_fail "Can't mount root filesystem" && break; } 9>/.console_lock
done
{
printf "Mounted root filesystem "
while read dev mp rest || [ -n "$dev" ]; do [ "$mp" = "$NEWROOT" ] && echo $dev; done < /proc/mounts
} | vinfo
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
getarg 'rd.break=pre-pivot' -d 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
make_trace_mem "hook cleanup" '1:shortmem' '2+:mem' '3+:slab'
cleanup_trace_mem
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' -d 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup
# By the time we get here, the root filesystem should be mounted.
# Try to find init.
for i in "$(getarg real_init=)" "$(getarg init=)" $(getargs rd.distroinit=) /sbin/init; do
[ -n "$i" ] || continue
__p=$(readlink -f "${NEWROOT}/${i}")
if [ -x "$__p" -o -x "${NEWROOT}/${__p}" ]; then
INIT="$i"
break
fi
done
[ "$INIT" ] || {
echo "Cannot find init!"
echo "Please check to make sure you passed a valid root filesystem!"
action_on_fail
}
if [ $UDEVVERSION -lt 168 ]; then
# stop udev queue before killing it
udevadm control --stop-exec-queue
HARD=""
while pidof udevd >/dev/null 2>&1; do
for pid in $(pidof udevd); do
kill $HARD $pid >/dev/null 2>&1
done
HARD="-9"
done
else
udevadm control --exit
udevadm info --cleanup-db
fi
debug_off # Turn off debugging for this section
# unexport some vars
export_n root rflags fstype netroot NEWROOT
export RD_TIMESTAMP
# Clean up the environment
for i in $(export -p); do
i=${i#declare -x}
i=${i#export}
strstr "$i" "=" || continue
i=${i%%=*}
[ -z "$i" ] && continue
case $i in
root|PATH|HOME|TERM|PS4|RD_*)
:;;
*)
unset "$i";;
esac
done
. /tmp/export.orig 2>/dev/null || :
rm -f -- /tmp/export.orig
initargs=""
read CLINE </proc/cmdline
if getarg init= >/dev/null ; then
ignoreargs="console BOOT_IMAGE"
# only pass arguments after init= to the init
CLINE=${CLINE#*init=}
set -- $CLINE
shift # clear out the rest of the "init=" arg
for x in "$@"; do
for s in $ignoreargs; do
[ "${x%%=*}" = $s ] && continue 2
done
initargs="$initargs $x"
done
unset CLINE
else
debug_off # Turn off debugging for this section
set -- $CLINE
for x in "$@"; do
case "$x" in
[0-9]|s|S|single|emergency|auto ) \
initargs="$initargs $x"
;;
esac
done
fi
debug_on
if ! [ -d "$NEWROOT"/run ]; then
NEWRUN=/dev/.initramfs
mkdir -m 0755 "$NEWRUN"
mount --rbind /run/initramfs "$NEWRUN"
fi
wait_for_loginit
# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root
getarg rd.break -d rdbreak && emergency_shell -n switch_root "Break before switch_root"
info "Switching root"
unset PS4
CAPSH=$(command -v capsh)
SWITCH_ROOT=$(command -v switch_root)
PATH=$OLDPATH
export PATH
if [ -f /etc/capsdrop ]; then
. /etc/capsdrop
info "Calling $INIT with capabilities $CAPS_INIT_DROP dropped."
unset RD_DEBUG
exec $CAPSH --drop="$CAPS_INIT_DROP" -- \
-c "exec switch_root \"$NEWROOT\" \"$INIT\" $initargs" || \
{
warn "Command:"
warn capsh --drop=$CAPS_INIT_DROP -- -c exec switch_root "$NEWROOT" "$INIT" $initargs
warn "failed."
action_on_fail
}
else
unset RD_DEBUG
exec $SWITCH_ROOT "$NEWROOT" "$INIT" $initargs || {
warn "Something went very badly wrong in the initramfs. Please "
warn "file a bug against dracut."
action_on_fail
}
fi
95dasd/module-setup.sh 0000755 00000001205 15272355670 0010631 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _arch=$(uname -m)
[ "$_arch" = "s390" -o "$_arch" = "s390x" ] || return 1
require_binaries normalize_dasd_arg || return 1
return 0
}
depends() {
return 0
}
installkernel() {
instmods dasd_mod dasd_eckd_mod dasd_fba_mod dasd_diag_mod
}
install() {
inst_hook cmdline 30 "$moddir/parse-dasd.sh"
inst_multiple dasdinfo dasdconf.sh normalize_dasd_arg
if [[ $hostonly ]]; then
inst /etc/dasd.conf
fi
inst_rules 56-dasd.rules
inst_rules 59-dasd.rules
}
95dasd/parse-dasd.sh 0000755 00000000445 15272355670 0010236 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
for dasd_arg in $(getargs rd.dasd= -d rd_DASD= DASD=); do
(
IFS=","
set -- $dasd_arg
echo "$@" | normalize_dasd_arg >> /etc/dasd.conf
)
done
95cifs/cifsroot.sh 0000755 00000001317 15272355670 0010053 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/cifs-lib.sh
[ "$#" = 3 ] || exit 1
# root is in the form root=cifs://user:pass@[server]/[folder] either from
# cmdline or dhcp root-path
netif="$1"
root="$2"
NEWROOT="$3"
cifs_to_var $root
echo server: $server
echo path: $path
echo options: $options
mount.cifs //$server/$path $NEWROOT -o $options && { [ -e /dev/root ] || ln -s null /dev/root ; }
# inject new exit_if_exists
echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm -f -- "$job"' > $hookdir/initqueue/cifs.sh
# force udevsettle to break
> $hookdir/initqueue/work
95cifs/module-setup.sh 0000755 00000002232 15272355670 0010643 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
# If our prerequisites are not met, fail anyways.
require_binaries mount.cifs || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "cifs" ]] && return 0
done
return 255
}
return 0
}
depends() {
# We depend on network modules being loaded
echo network
}
installkernel() {
instmods cifs ipv6
}
install() {
local _i
local _nsslibs
inst_multiple -o mount.cifs
inst_multiple /etc/services /etc/nsswitch.conf /etc/protocols
inst_libdir_file 'libcap-ng.so*'
_nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
| tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
inst_libdir_file -n "$_nsslibs" 'libnss_*.so*'
inst_hook cmdline 90 "$moddir/parse-cifsroot.sh"
inst "$moddir/cifsroot.sh" "/sbin/cifsroot"
inst "$moddir/cifs-lib.sh" "/lib/cifs-lib.sh"
dracut_need_initqueue
}
95cifs/parse-cifsroot.sh 0000755 00000002414 15272355670 0011162 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# root=cifs://[user:pass@]<server>/<folder>
#
# This syntax can come from DHCP root-path as well.
#
# If a username or password are not specified as part of the root, then they
# will be pulled from cifsuser and cifspass on the kernel command line,
# respectively.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/cifs-lib.sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "${netroot%%:*}" = "cifs" ] && break
done
[ "${netroot%%:*}" = "cifs" ] || unset netroot
fi
# Root takes precedence over netroot
if [ "${root%%:*}" = "cifs" ] ; then
if [ -n "$netroot" ] ; then
warn "root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
unset root
fi
# If it's not cifs we don't continue
[ "${netroot%%:*}" = "cifs" ] || return
# Check required arguments
cifs_to_var $netroot
# If we don't have a server, we need dhcp
if [ -z "$server" ] ; then
DHCPORSERVER="1"
fi;
# Done, all good!
rootok=1
echo '[ -e $NEWROOT/proc ]' > $hookdir/initqueue/finished/cifsroot.sh
95cifs/cifs-lib.sh 0000755 00000002067 15272355670 0007716 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# cifs_to_var CIFSROOT
# use CIFSROOT to set $server, $path, and $options.
# CIFSROOT is something like: cifs://[<username>[:<password>]]@<host>/<path>
# NETIF is used to get information from DHCP options, if needed.
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
cifs_to_var() {
local cifsuser; local cifspass
# Check required arguments
server=${1##cifs://}
cifsuser=${server%@*}
cifspass=${cifsuser#*:}
if [ "$cifspass" != "$cifsuser" ]; then
cifsuser=${cifsuser%:*}
else
cifspass=$(getarg cifspass)
fi
if [ "$cifsuser" != "$server" ]; then
server="${server#*@}"
else
cifsuser=$(getarg cifsuser)
fi
path=${server#*/}
server=${server%/*}
if [ ! "$cifsuser" -o ! "$cifspass" ]; then
die "For CIFS support you need to specify a cifsuser and cifspass either in the cifsuser and cifspass commandline parameters or in the root= CIFS URL."
fi
options="user=$cifsuser,pass=$cifspass"
}
95znet/parse-ccw.sh 0000755 00000001727 15272355670 0010150 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
for ccw_arg in $(getargs rd.ccw -d 'rd_CCW=') $(getargs rd.znet -d 'rd_ZNET='); do
echo $ccw_arg >> /etc/ccw.conf
done
for ifname in $(getargs rd.znet_ifname); do
IFS=: read ifname_if ifname_subchannels _rest <<< "$ifname"
if [ -z "$ifname_if" ] || [ -z "$ifname_subchannels" ] || [ -n "$_rest" ]; then
warn "Invalid arguments for rd.znet_ifname="
else
{
ifname_subchannels=${ifname_subchannels//,/|}
echo 'ACTION!="add|change", GOTO="ccw_ifname_end"'
echo 'ATTR{type}!="1", GOTO="ccw_ifname_end"'
echo 'SUBSYSTEM!="net", GOTO="ccw_ifname_end"'
echo "SUBSYSTEMS==\"ccwgroup\", KERNELS==\"$ifname_subchannels\", DRIVERS==\"?*\" NAME=\"$ifname_if\""
echo 'LABEL="ccw_ifname_end"'
} > /etc/udev/rules.d/81-ccw-ifname.rules
fi
done
znet_cio_free
95znet/module-setup.sh 0000755 00000001053 15272355670 0010677 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
require_binaries znet_cio_free grep sed seq readlink || return 1
return 0
}
depends() {
return 0
}
installkernel() {
instmods ctcm lcs qeth qeth_l2 qeth_l3
}
install() {
inst_hook cmdline 30 "$moddir/parse-ccw.sh"
inst_rules 81-ccw.rules
inst_multiple znet_cio_free grep sed seq readlink /lib/udev/ccw_init
}
90dmsquash-live-ntfs/module-setup.sh 0000755 00000000454 15272355670 0013450 0 ustar 00 #!/bin/bash
command -v
check() {
require_binaries ntfs-3g || return 1
return 255
}
depends() {
echo dmsquash-live
return 0
}
install() {
inst_multiple fusermount ulockmgr_server mount.fuse ntfs-3g
dracut_need_initqueue
}
installkernel() {
hostonly='' instmods fuse
}
98pollcdrom/pollcdrom.sh 0000755 00000001351 15272355670 0011266 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Licensed under the GPLv2
#
# Copyright 2008-2012, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
if [ ! -e /sys/module/block/parameters/events_dfl_poll_msecs ]; then
# if the kernel does not support autopolling
# then we have to do a
# dirty hack for some cdrom drives,
# which report no medium for quiet
# some time.
for cdrom in /sys/block/sr*; do
[ -e "$cdrom" ] || continue
# skip, if cdrom medium was already found
strstr "$(udevadm info --query=env --path=${cdrom##/sys})" \
ID_CDROM_MEDIA && continue
echo change > "$cdrom/uevent"
done
fi
98pollcdrom/module-setup.sh 0000755 00000000374 15272355670 0011722 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 255
}
depends() {
return 0
}
install() {
inst_hook initqueue/settled 99 "$moddir/pollcdrom.sh"
}
50drm/module-setup.sh 0000755 00000003724 15272355670 0010477 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 255
}
depends() {
return 0
}
installkernel() {
local _modname
# Include KMS capable drm drivers
drm_module_filter() {
local _drm_drivers='drm_crtc_init'
local _ret
# subfunctions inherit following FDs
local _merge=8 _side2=9
function nmf1() {
local _fname _fcont
while read _fname; do
case "$_fname" in
*.ko) _fcont="$(< $_fname)" ;;
*.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
*.ko.xz) _fcont="$(xz -dc $_fname)" ;;
esac
[[ $_fcont =~ $_drm_drivers
&& ! $_fcont =~ iw_handler_get_spy ]] \
&& echo "$_fname"
done
}
function rotor() {
local _f1 _f2
while read _f1; do
echo "$_f1"
if read _f2; then
echo "$_f2" 1>&${_side2}
fi
done | nmf1 1>&${_merge}
}
# Use two parallel streams to filter alternating modules.
set +x
eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
[[ $debug ]] && set -x
return 0
}
instmods amdkfd hyperv_fb
for _modname in $(find_kernel_modules_by_path drivers/gpu/drm \
| drm_module_filter) ; do
# if the hardware is present, include module even if it is not currently loaded,
# as we could e.g. be in the installer; nokmsboot boot parameter will disable
# loading of the driver if needed
if [[ $hostonly ]] && modinfo -F alias $_modname | sed -e 's,\?,\.,g' -e 's,\*,\.\*,g' \
| grep -qxf - /sys/bus/pci/devices/*/modalias 2>/dev/null; then
hostonly='' instmods $_modname
continue
fi
instmods $_modname
done
}
45url-lib/url-lib.sh 0000755 00000007657 15272355670 0010223 0 ustar 00 #!/bin/sh
# url-lib.sh - functions for handling URLs (file fetching etc.)
#
# Authors:
# Will Woods <wwoods@redhat.com>
type mkuniqdir >/dev/null 2>&1 || . /lib/dracut-lib.sh
# fetch_url URL [OUTFILE]
# fetch the given URL to a locally-visible location.
# if OUTFILE is given, the URL will be fetched to that filename,
# overwriting it if present.
# If the URL is something mountable (e.g. nfs://) and no OUTFILE is given,
# the server will be left mounted until pre-pivot.
# the return values are as follows:
# 0: success
# 253: unknown error (file missing)
# 254: unhandled URL scheme / protocol
# 255: bad arguments / unparseable URLs
# other: fetch command failure (whatever curl/mount/etc return)
fetch_url() {
local url="$1" outloc="$2"
local handler="$(get_url_handler $url)"
[ -n "$handler" ] || return 254
[ -n "$url" ] || return 255
"$handler" "$url" "$outloc"
}
# get_url_handler URL
# returns the first HANDLERNAME corresponding to the URL's scheme
get_url_handler() {
local scheme="${1%%:*}" item=""
for item in $url_handler_map; do
[ "$scheme" = "${item%%:*}" ] && echo "${item#*:}" && return 0
done
return 1
}
# add_url_handler HANDLERNAME SCHEME [SCHEME...]
# associate the named handler with the named scheme(s).
add_url_handler() {
local handler="$1"; shift
local schemes="$@" scheme=""
set --
for scheme in $schemes; do
[ "$(get_url_handler $scheme)" = "$handler" ] && continue
set -- "$@" "$scheme:$handler"
done
set -- $@ $url_handler_map # add new items to *front* of list
url_handler_map="$@"
}
### HTTP, HTTPS, FTP #################################################
export CURL_HOME="/run/initramfs/url-lib"
mkdir -p $CURL_HOME
curl_args="--globoff --location --retry 3 --fail --show-error"
getargbool 0 rd.noverifyssl && curl_args="$curl_args --insecure"
proxy=$(getarg proxy=)
[ -n "$proxy" ] && curl_args="$curl_args --proxy $proxy"
curl_fetch_url() {
local url="$1" outloc="$2"
echo "$url" > /proc/self/fd/0
if [ -n "$outloc" ]; then
curl $curl_args --output - -- "$url" > "$outloc" || return $?
else
local outdir="$(mkuniqdir /tmp curl_fetch_url)"
( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
outloc="$outdir/$(ls -A $outdir)"
fi
if ! [ -f "$outloc" ]; then
warn "Downloading '$url' failed!"
return 253
fi
if [ -z "$2" ]; then echo "$outloc" ; fi
}
add_url_handler curl_fetch_url http https ftp
set_http_header() {
echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc
}
### NFS ##############################################################
[ -e /lib/nfs-lib.sh ] && . /lib/nfs-lib.sh
nfs_already_mounted() {
local server="$1" path="$2" localdir="" s="" p=""
cat /proc/mounts | while read src mnt rest; do
splitsep ":" "$src" s p
if [ "$server" = "$s" ]; then
if [ "$path" = "$p" ]; then
echo $mnt
elif str_starts "$path" "$p"; then
echo $mnt/${path#$p/}
fi
fi
done
}
nfs_fetch_url() {
local url="$1" outloc="$2" nfs="" server="" path="" options=""
nfs_to_var "$url" || return 255
local filepath="${path%/*}" filename="${path##*/}" mntdir=""
# skip mount if server:/filepath is already mounted
mntdir=$(nfs_already_mounted "$server" "$filepath")
if [ -z "$mntdir" ]; then
local mntdir="$(mkuniqdir /run nfs_mnt)"
mount_nfs "$nfs:$server:$filepath${options:+:$options}" "$mntdir"
# lazy unmount during pre-pivot hook
inst_hook --hook pre-pivot --name 99url-lib-umount-nfs umount -l -- "$mntdir"
fi
if [ -z "$outloc" ]; then
outloc="$mntdir/$filename"
else
cp -f -- "$mntdir/$filename" "$outloc" || return $?
fi
[ -f "$outloc" ] || return 253
if [ -z "$2" ]; then echo "$outloc" ; fi
}
command -v nfs_to_var >/dev/null && add_url_handler nfs_fetch_url nfs nfs4
45url-lib/module-setup.sh 0000755 00000002014 15272355670 0011256 0 ustar 00 #!/bin/bash
# module-setup for url-lib
check() {
require_binaries curl || return 1
return 255
}
depends() {
echo network
return 0
}
install() {
local _dir _crt _found _lib
inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
inst_multiple curl
# also install libs for curl https
inst_libdir_file "libnsspem.so*"
inst_libdir_file "libnsssysinit.so*"
inst_libdir_file "libsoftokn3.so*"
inst_libdir_file "libsqlite3.so*"
for _dir in $libdirs; do
[[ -d $_dir ]] || continue
for _lib in $_dir/libcurl.so.*; do
[[ -e $_lib ]] || continue
_crt=$(grep -F --binary-files=text -z .crt $_lib)
[[ $_crt ]] || continue
[[ $_crt == /*/* ]] || continue
if ! inst "$_crt"; then
dwarn "Couldn't install '$_crt' SSL CA cert bundle; HTTPS might not work."
continue
fi
_found=1
done
done
[[ $_found ]] || dwarn "Couldn't find SSL CA cert bundle; HTTPS won't work."
}
95nfs/parse-nfsroot.sh 0000755 00000006436 15272355670 0010676 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Preferred format:
# root=nfs[4]:[server:]path[:options]
#
# This syntax can come from DHCP root-path as well.
#
# Legacy format:
# root=/dev/nfs nfsroot=[server:]path[,options]
#
# In Legacy root=/dev/nfs mode, if the 'nfsroot' parameter is not given
# on the command line or is empty, the dhcp root-path is used as
# [server:]path[:options] or the default "/tftpboot/%s" will be used.
#
# If server is unspecified it will be pulled from one of the following
# sources, in order:
# static ip= option on kernel command line
# DHCP next-server option
# DHCP server-id option
# DHCP root-path option
#
# NFSv4 is only used if explicitly requested with nfs4: prefix, otherwise
# NFSv3 is used.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
[ -z "$nfsroot" ] && nfsroot=$(getarg nfsroot=)
[ -n "$netroot" ] && oldnetroot="$netroot"
# netroot= cmdline argument must be ignored, but must be used if
# we're inside netroot to parse dhcp root-path
if [ -n "$netroot" ] ; then
for n in $(getargs netroot=); do
[ "$n" = "$netroot" ] && break
done
if [ "$n" = "$netroot" ]; then
#warn "Ignoring netroot argument for NFS"
netroot=$root
fi
else
netroot=$root;
fi
# LEGACY: nfsroot= is valid only if root=/dev/nfs
if [ -n "$nfsroot" ] ; then
# @deprecated
warn "Argument nfsroot is deprecated and might be removed in a future release. See 'man dracut.kernel' for more information."
if [ "$(getarg root=)" != "/dev/nfs" ]; then
die "Argument nfsroot only accepted for legacy root=/dev/nfs"
fi
netroot=nfs:$nfsroot;
fi
case "$netroot" in
/dev/nfs) netroot=nfs;;
/dev/*)
if [ -n "$oldnetroot" ]; then
netroot="$oldnetroot"
else
unset netroot
fi
return
;;
# LEGACY: root=<server-ip>:/<path
[0-9]*:/*|[0-9]*\.[0-9]*\.[0-9]*[!:]|/*)
netroot=nfs:$netroot;;
esac
# Continue if nfs
case "${netroot%%:*}" in
nfs|nfs4|/dev/nfs);;
*)
if [ -n "$oldnetroot" ]; then
netroot="$oldnetroot"
else
unset netroot
fi
return
;;
esac
# Check required arguments
if nfsdomain=$(getarg rd.nfs.domain -d rd_NFS_DOMAIN); then
if [ -f /etc/idmapd.conf ]; then
sed -i -e \
"s/^[[:space:]#]*Domain[[:space:]]*=.*/Domain = $nfsdomain/g" \
/etc/idmapd.conf
fi
# and even again after the sed, in case it was not yet specified
echo "Domain = $nfsdomain" >> /etc/idmapd.conf
fi
nfsroot_to_var $netroot
[ "$path" = "error" ] && die "Argument nfsroot must contain a valid path!"
# Set fstype, might help somewhere
fstype=${nfs#/dev/}
# Rewrite root so we don't have to parse this uglyness later on again
netroot="$fstype:$server:$path:$options"
# If we don't have a server, we need dhcp
if [ -z "$server" ] ; then
DHCPORSERVER="1"
fi;
# Done, all good!
rootok=1
# Shut up init error check or make sure that block parser wont get
# confused by having /dev/nfs[4]
root="$fstype"
echo '[ -e $NEWROOT/proc ]' > $hookdir/initqueue/finished/nfsroot.sh
95nfs/nfs-lib.sh 0000755 00000011225 15272355670 0007416 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/net-lib.sh
# TODO: make these things not pollute the calling namespace
# nfs_to_var NFSROOT [NETIF]
# use NFSROOT to set $nfs, $server, $path, and $options.
# NFSROOT is something like: nfs[4]:<server>:/<path>[:<options>|,<options>]
# NETIF is used to get information from DHCP options, if needed.
nfs_to_var() {
# Unfortunately, there's multiple styles of nfs "URL" in use, so we need
# extra functions to parse them into $nfs, $server, $path, and $options.
# FIXME: local netif=${2:-$netif}?
case "$1" in
nfs://*) rfc2224_nfs_to_var "$1" ;;
nfs:*[*) anaconda_nfsv6_to_var "$1" ;;
nfs:*:*:/*) anaconda_nfs_to_var "$1" ;;
*) nfsroot_to_var "$1" ;;
esac
# if anything's missing, try to fill it in from DHCP options
if [ -z "$server" ] || [ -z "$path" ]; then nfsroot_from_dhcp $2; fi
# if there's a "%s" in the path, replace it with the hostname/IP
if strstr "$path" "%s"; then
local node=""
read node < /proc/sys/kernel/hostname
[ "$node" = "(none)" ] && node=$(get_ip $2)
path=${path%%%s*}$node${path#*%s} # replace only the first %s
fi
}
# root=nfs:[<server-ip>:]<root-dir>[:<nfs-options>]
# root=nfs4:[<server-ip>:]<root-dir>[:<nfs-options>]
nfsroot_to_var() {
# strip nfs[4]:
local arg="$@:"
nfs="${arg%%:*}"
arg="${arg##$nfs:}"
# check if we have a server
if strstr "$arg" ':/*' ; then
server="${arg%%:/*}"
arg="/${arg##*:/}"
fi
path="${arg%%:*}"
# rest are options
options="${arg##$path}"
# strip leading ":"
options="${options##:}"
# strip ":"
options="${options%%:}"
# Does it really start with '/'?
[ -n "${path%%/*}" ] && path="error";
#Fix kernel legacy style separating path and options with ','
if [ "$path" != "${path#*,}" ] ; then
options=${path#*,}
path=${path%%,*}
fi
}
# RFC2224: nfs://<server>[:<port>]/<path>
rfc2224_nfs_to_var() {
nfs="nfs"
server="${1#nfs://}"
path="/${server#*/}"
server="${server%%/*}"
server="${server%%:}" # anaconda compat (nfs://<server>:/<path>)
local port="${server##*:}"
[ "$port" != "$server" ] && options="port=$port"
}
# Anaconda-style path with options: nfs:<options>:<server>:/<path>
# (without mount options, anaconda is the same as dracut)
anaconda_nfs_to_var() {
nfs="nfs"
options="${1#nfs:}"
server="${options#*:}"
server="${server%:/*}"
options="${options%%:*}"
path="/${1##*:/}"
}
# IPv6 nfs path will be treated separately
anaconda_nfsv6_to_var() {
nfs="nfs"
path="$1:"
options="${path#*:/}"
path="/${options%%:*}"
server="${1#*nfs:}"
if str_starts $server '['; then
server="${server%:/*}"
options="${options#*:*}"
else
server="${server%:/*}"
options="${server%%:*}"
server="${server#*:}"
fi
}
# nfsroot_from_dhcp NETIF
# fill in missing server/path from DHCP options.
nfsroot_from_dhcp() {
local f
for f in /tmp/net.$1.override /tmp/dhclient.$1.dhcpopts; do
[ -f $f ] && . $f
done
[ -n "$new_root_path" ] && nfsroot_to_var "$nfs:$new_root_path"
[ -z "$path" ] && [ "$(getarg root=)" == "/dev/nfs" ] && path=/tftpboot/%s
[ -z "$server" ] && server=$srv
[ -z "$server" ] && server=$new_dhcp_server_identifier
[ -z "$server" ] && server=$new_next_server
[ -z "$server" ] && server=${new_root_path%%:*}
}
# Look through $options, fix "rw"/"ro", move "lock"/"nolock" to $nfslock
munge_nfs_options() {
local f="" flags="" nfsrw="ro" OLDIFS="$IFS"
IFS=,
for f in $options; do
case $f in
ro|rw) nfsrw=$f ;;
lock|nolock) nfslock=$f ;;
*) flags=${flags:+$flags,}$f ;;
esac
done
IFS="$OLDIFS"
# Override rw/ro if set on cmdline
getarg ro >/dev/null && nfsrw=ro
getarg rw >/dev/null && nfsrw=rw
options=$nfsrw${flags:+,$flags}
}
# mount_nfs NFSROOT MNTDIR [NETIF]
mount_nfs() {
local nfsroot="$1" mntdir="$2" netif="$3"
local nfs="" server="" path="" options=""
nfs_to_var "$nfsroot" $netif
munge_nfs_options
if [ "$nfs" = "nfs4" ]; then
options=$options${nfslock:+,$nfslock}
else
# NFSv{2,3} doesn't support using locks as it requires a helper to
# transfer the rpcbind state to the new root
[ "$nfslock" = "lock" ] \
&& warn "Locks unsupported on NFSv{2,3}, using nolock" 1>&2
options=$options,nolock
fi
mount -t $nfs -o$options "$server:$path" "$mntdir"
}
95nfs/nfsroot.sh 0000755 00000001471 15272355670 0007560 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/nfs-lib.sh
[ "$#" = 3 ] || exit 1
# root is in the form root=nfs[4]:[server:]path[:options], either from
# cmdline or dhcp root-path
netif="$1"
root="$2"
NEWROOT="$3"
nfs_to_var $root $netif
[ -z "$server" ] && die "Required parameter 'server' is missing"
mount_nfs $root $NEWROOT $netif && { [ -e /dev/root ] || ln -s null /dev/root ; [ -e /dev/nfs ] || ln -s null /dev/nfs; }
[ -f $NEWROOT/etc/fstab ] && cat $NEWROOT/etc/fstab > /dev/null
# inject new exit_if_exists
echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm -- "$job"' > $hookdir/initqueue/nfs.sh
# force udevsettle to break
> $hookdir/initqueue/work
need_shutdown
95nfs/nfs-start-rpc.sh 0000755 00000001641 15272355670 0010570 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if modprobe sunrpc || strstr "$(cat /proc/filesystems)" rpc_pipefs; then
[ ! -d /var/lib/nfs/rpc_pipefs/nfs ] && \
mount -t rpc_pipefs rpc_pipefs /var/lib/nfs/rpc_pipefs
# Start rpcbind or rpcbind
# FIXME occasionally saw 'rpcbind: fork failed: No such device' -- why?
command -v portmap >/dev/null && [ -z "$(pidof portmap)" ] && portmap
command -v rpcbind >/dev/null && [ -z "$(pidof rpcbind)" ] && rpcbind
# Start rpc.statd as mount won't let us use locks on a NFSv4
# filesystem without talking to it. NFSv4 does locks internally,
# rpc.lockd isn't needed
[ -z "$(pidof rpc.statd)" ] && rpc.statd
[ -z "$(pidof rpc.idmapd)" ] && rpc.idmapd
else
warn 'Kernel module "sunrpc" not in the initramfs, or support for filesystem "rpc_pipefs" missing!'
fi
95nfs/module-setup.sh 0000755 00000005100 15272355670 0010502 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
# If our prerequisites are not met, fail anyways.
require_any_binary rpcbind portmap || return 1
require_binaries rpc.statd mount.nfs mount.nfs4 umount || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "nfs" ]] && return 0
[[ "$fs" == "nfs3" ]] && return 0
[[ "$fs" == "nfs4" ]] && return 0
done
return 255
}
return 0
}
depends() {
# We depend on network modules being loaded
echo network
}
installkernel() {
hostonly='' instmods =net/sunrpc =fs/nfs ipv6 nfs_acl nfs_layout_nfsv41_files
}
install() {
local _i
local _nsslibs
inst_multiple -o portmap rpcbind rpc.statd mount.nfs \
mount.nfs4 umount rpc.idmapd sed /etc/netconfig
inst_multiple /etc/services /etc/nsswitch.conf /etc/rpc /etc/protocols /etc/idmapd.conf
if [ -f /lib/modprobe.d/nfs.conf ]; then
inst_multiple /lib/modprobe.d/nfs.conf
else
[ -d $initdir/etc/modprobe.d/ ] || mkdir $initdir/etc/modprobe.d
echo "alias nfs4 nfs" > $initdir/etc/modprobe.d/nfs.conf
fi
inst_libdir_file 'libnfsidmap_nsswitch.so*' 'libnfsidmap/*.so' 'libnfsidmap*.so*'
_nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
| tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
inst_libdir_file -n "$_nsslibs" 'libnss_*.so*'
inst_hook cmdline 90 "$moddir/parse-nfsroot.sh"
inst_hook pre-udev 99 "$moddir/nfs-start-rpc.sh"
inst_hook cleanup 99 "$moddir/nfsroot-cleanup.sh"
inst "$moddir/nfsroot.sh" "/sbin/nfsroot"
inst "$moddir/nfs-lib.sh" "/lib/nfs-lib.sh"
mkdir -m 0755 -p "$initdir/var/lib/nfs/rpc_pipefs"
mkdir -m 0755 -p "$initdir/var/lib/rpcbind"
mkdir -m 0755 -p "$initdir/var/lib/nfs/statd/sm"
# Rather than copy the passwd file in, just set a user for rpcbind
# We'll save the state and restart the daemon from the root anyway
egrep '^nfsnobody:|^rpc:|^rpcuser:' /etc/passwd >> "$initdir/etc/passwd"
egrep '^nogroup:|^rpc:|^nobody:' /etc/group >> "$initdir/etc/group"
# rpc user needs to be able to write to this directory to save the warmstart
# file
chmod 770 "$initdir/var/lib/rpcbind"
egrep -q '^rpc:' /etc/passwd \
&& egrep -q '^rpc:' /etc/group \
&& chown rpc.rpc "$initdir/var/lib/rpcbind"
dracut_need_initqueue
}
95nfs/nfsroot-cleanup.sh 0000755 00000001673 15272355670 0011211 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type incol2 >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -f /tmp/nfs.rpc_pipefs_path ] && rpcpipefspath=`cat /tmp/nfs.rpc_pipefs_path`
[ -z "$rpcpipefspath" ] && rpcpipefspath=var/lib/nfs/rpc_pipefs
pid=$(pidof rpc.statd)
[ -n "$pid" ] && kill $pid
pid=$(pidof rpc.idmapd)
[ -n "$pid" ] && kill $pid
pid=$(pidof rpcbind)
[ -n "$pid" ] && kill $pid
if incol2 /proc/mounts /var/lib/nfs/rpc_pipefs; then
# try to create the destination directory
[ -d $NEWROOT/$rpcpipefspath ] || \
mkdir -m 0755 -p $NEWROOT/$rpcpipefspath 2>/dev/null
if [ -d $NEWROOT/$rpcpipefspath ]; then
# mount --move does not seem to work???
mount --bind /var/lib/nfs/rpc_pipefs $NEWROOT/$rpcpipefspath
umount /var/lib/nfs/rpc_pipefs 2>/dev/null
else
umount /var/lib/nfs/rpc_pipefs 2>/dev/null
fi
fi
95terminfo/module-setup.sh 0000755 00000001203 15272355670 0011537 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
install() {
local _terminfodir
# terminfo bits make things work better if you fall into interactive mode
for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
[ -f ${_terminfodir}/l/linux ] && break
done
if [ -d ${_terminfodir} ]; then
for i in "l/linux" "v/vt100" "v/vt102" "v/vt220"; do
inst_dir "$_terminfodir/${i%/*}"
cp --reflink=auto --sparse=auto -prfL -t "${initdir}/${_terminfodir}/${i%/*}" "$_terminfodir/$i"
done
fi
}
95virtfs/virtfs-generator.sh 0000755 00000001632 15272355671 0012116 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -z "$root" ] && root=$(getarg root=)
[ "${root%%:*}" = "virtfs" ] || exit 0
GENERATOR_DIR="$2"
[ -z "$GENERATOR_DIR" ] && exit 1
[ -d "$GENERATOR_DIR" ] || mkdir "$GENERATOR_DIR"
ROOTFLAGS=$(getarg rootflags=) || ROOTFLAGS="trans=virtio,version=9p2000.L"
ROOTFSTYPE=$(getarg rootfstype=) || ROOTFSTYPE="9p"
root=${root#virtfs:}
if getarg "ro"; then
if [ -n "$ROOTFLAGS" ]; then
ROOTFLAGS="$ROOTFLAGS,ro"
else
ROOTFLAGS="ro"
fi
fi
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "[Mount]"
echo "Where=/sysroot"
echo "What=${root}"
[ -n "$ROOTFSTYPE" ] && echo "Type=${ROOTFSTYPE}"
[ -n "$ROOTFLAGS" ] && echo "Options=${ROOTFLAGS}"
} > "$GENERATOR_DIR"/sysroot.mount
exit 0
95virtfs/parse-virtfs.sh 0000755 00000000345 15272355671 0011242 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ "${root%%:*}" = "virtfs" ] ; then
initqueue --onetime modprobe -b -q 9pnet_virtio
rootok=1
fi
95virtfs/module-setup.sh 0000755 00000002235 15272355671 0011240 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "9p" ]] && return 0
done
return 255
}
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm >/dev/null 2>&1)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
}
depends() {
return 0
}
installkernel() {
instmods 9p 9pnet_virtio virtio_pci
}
install() {
inst_hook cmdline 95 "$moddir/parse-virtfs.sh"
if ! dracut_module_included "systemd"; then
inst_hook mount 99 "$moddir/mount-virtfs.sh"
else
inst_script "$moddir/virtfs-generator.sh" $systemdutildir/system-generators/dracut-virtfs-generator
fi
}
95virtfs/mount-virtfs.sh 0000755 00000003644 15272355671 0011277 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
filter_rootopts() {
rootopts=$1
# strip ro and rw options
local OLDIFS="$IFS"
IFS=,
set -- $rootopts
IFS="$OLDIFS"
local v
while [ $# -gt 0 ]; do
case $1 in
rw|ro);;
defaults);;
*)
v="$v,${1}";;
esac
shift
done
rootopts=${v#,}
echo $rootopts
}
mount_root() {
local _ret
rootfs="9p"
rflags="trans=virtio,version=9p2000.L"
modprobe 9pnet_virtio
mount -t ${rootfs} -o "$rflags",ro "${root#virtfs:}" "$NEWROOT"
rootopts=
if getargbool 1 rd.fstab -n rd_NO_FSTAB \
&& ! getarg rootflags \
&& [ -f "$NEWROOT/etc/fstab" ] \
&& ! [ -L "$NEWROOT/etc/fstab" ]; then
# if $NEWROOT/etc/fstab contains special mount options for
# the root filesystem,
# remount it with the proper options
rootopts="defaults"
while read dev mp fs opts rest; do
# skip comments
[ "${dev%%#*}" != "$dev" ] && continue
if [ "$mp" = "/" ]; then
rootopts=$opts
break
fi
done < "$NEWROOT/etc/fstab"
rootopts=$(filter_rootopts $rootopts)
fi
# we want rootflags (rflags) to take precedence so prepend rootopts to
# them; rflags is guaranteed to not be empty
rflags="${rootopts:+"${rootopts},"}${rflags}"
umount "$NEWROOT"
info "Remounting ${root#virtfs:} with -o ${rflags}"
mount -t ${rootfs} -o "$rflags" "${root#virtfs:}" "$NEWROOT" 2>&1 | vinfo
[ -f "$NEWROOT"/forcefsck ] && rm -f -- "$NEWROOT"/forcefsck 2>/dev/null
[ -f "$NEWROOT"/.autofsck ] && rm -f -- "$NEWROOT"/.autofsck 2>/dev/null
}
if [ -n "$root" -a -z "${root%%virtfs:*}" ]; then
mount_root
fi
:
95iscsi/cleanup-iscsi.sh 0000755 00000000306 15272355671 0011146 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && killproc iscsiuio
95iscsi/parse-iscsiroot.sh 0000755 00000012306 15272355671 0011540 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Preferred format:
# root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
# [root=*] netroot=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
#
# Legacy formats:
# [net]root=[iscsi] iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
# [net]root=[iscsi] iscsi_firmware
#
# root= takes precedence over netroot= if root=iscsi[...]
#
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for nroot in $(getargs netroot=); do
[ "${nroot%%:*}" = "iscsi" ] && break
done
if [ "${nroot%%:*}" = "iscsi" ]; then
netroot="$nroot"
else
for nroot in $(getargs netroot=); do
[ "${nroot%%:*}" = "dhcp" ] && break
done
netroot="$nroot"
fi
fi
[ -z "$iscsiroot" ] && iscsiroot=$(getarg iscsiroot=)
[ -z "$iscsi_firmware" ] && getargbool 0 rd.iscsi.firmware -y iscsi_firmware && iscsi_firmware="1"
[ -n "$iscsiroot" ] && [ -n "$iscsi_firmware" ] && die "Mixing iscsiroot and iscsi_firmware is dangerous"
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
# Root takes precedence over netroot
if [ "${root%%:*}" = "iscsi" ] ; then
if [ -n "$netroot" ] ; then
echo "Warning: root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
# if root is not specified try to mount the whole iSCSI LUN
printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules
root=/dev/root
write_fs_tab /dev/root
fi
# If it's not empty or iscsi we don't continue
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
netroot="$nroot"
break
done
if [ -n "$iscsiroot" ] ; then
[ -z "$netroot" ] && netroot=$root
# @deprecated
echo "Warning: Argument iscsiroot is deprecated and might be removed in a future"
echo "release. See 'man dracut.kernel' for more information."
# Accept iscsiroot argument?
[ -z "$netroot" ] || [ "$netroot" = "iscsi" ] || \
die "Argument iscsiroot only accepted for empty root= or [net]root=iscsi"
# Override root with iscsiroot content?
[ -z "$netroot" ] || [ "$netroot" = "iscsi" ] && netroot=iscsi:$iscsiroot
fi
# iscsi_firmware does not need argument checking
if [ -n "$iscsi_firmware" ]; then
if [ "$root" != "dhcp" ] && [ "$netroot" != "dhcp" ]; then
[ -z "$netroot" ] && netroot=iscsi:
fi
modprobe -b -q iscsi_boot_sysfs 2>/dev/null
modprobe -b -q iscsi_ibft
# if no ip= is given, but firmware
echo "[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh
initqueue --unique --online /sbin/iscsiroot online "iscsi:" "$NEWROOT"
initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "iscsi:" "$NEWROOT"
initqueue --unique --onetime --settled /sbin/iscsiroot online "iscsi:" "'$NEWROOT'"
fi
if [ -z "$netroot" ] || ! [ "${netroot%%:*}" = "iscsi" ]; then
return 1
fi
initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "$netroot" "$NEWROOT"
initqueue --onetime modprobe --all -b -q qla4xxx cxgb3i cxgb4i bnx2i be2iscsi
# ISCSI actually supported?
if ! [ -e /sys/module/iscsi_tcp ]; then
modprobe -b -q iscsi_tcp || die "iscsiroot requested but kernel/initrd does not support iscsi"
fi
if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; then
if ! getargbool 1 rd.neednet >/dev/null || ! getarg "ip="; then
initqueue --unique --onetime --settled /sbin/iscsiroot dummy "'$netroot'" "'$NEWROOT'"
fi
fi
if arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) && [ -n "$arg" ] && ! [ -f /run/initiatorname.iscsi ] ; then
iscsi_initiator=$arg
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
fi
fi
# If not given on the cmdline and initiator-name available via iBFT
if [ -z $iscsi_initiator ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then
iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
if [ -n "$iscsi_initiator" ]; then
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
> /tmp/iscsi_set_initiator
systemctl try-restart iscsid && sleep 1
fi
fi
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
parse_iscsi_root "$nroot" || return 1
netroot_enc=$(str_replace "$nroot" '/' '\2f')
echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
done
# Done, all good!
rootok=1
# Shut up init error check
[ -z "$root" ] && root="iscsi"
95iscsi/iscsiroot.sh 0000755 00000023532 15272355671 0010433 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# This implementation is incomplete: Discovery mode is not implemented and
# the argument handling doesn't follow currently agreed formats. This is mainly
# because rfc4173 does not say anything about iscsi_initiator but open-iscsi's
# iscsistart needs this.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# Huh? Empty $2?
[ -z "$2" ] && exit 1
# Huh? Empty $3? This isn't really necessary, since NEWROOT isn't
# used here. But let's be consistent
[ -z "$3" ] && exit 1
# root is in the form root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
netif="$1"
iroot="$2"
# If it's not iscsi we don't continue
[ "${iroot%%:*}" = "iscsi" ] || exit 1
iroot=${iroot#iscsi}
iroot=${iroot#:}
# XXX modprobe crc32c should go in the cmdline parser, but I haven't yet
# figured out a way how to check whether this is built-in or not
modprobe crc32c 2>/dev/null
if [ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && ! [ -e /tmp/iscsiuio-started ]; then
iscsiuio
> /tmp/iscsiuio-started
fi
handle_firmware()
{
if ! iscsistart -f; then
warn "iscistart: Could not get list of targets from firmware. Skipping."
echo 'skipped' > "/tmp/iscsistarted-firmware"
return 0
fi
for p in $(getargs rd.iscsi.param -d iscsi_param); do
iscsi_param="$iscsi_param --param $p"
done
if ! iscsistart -b $iscsi_param; then
warn "'iscsistart -b $iscsi_param' failed with return code $?"
fi
echo 'started' > "/tmp/iscsistarted-iscsi:"
echo 'started' > "/tmp/iscsistarted-firmware"
need_shutdown
return 0
}
handle_netroot()
{
local iscsi_initiator iscsi_target_name iscsi_target_ip iscsi_target_port
local iscsi_target_group iscsi_protocol iscsirw iscsi_lun
local iscsi_username iscsi_password
local iscsi_in_username iscsi_in_password
local iscsi_iface_name iscsi_netdev_name
local iscsi_param
local p
# override conf settings by command line options
arg=$(getargs rd.iscsi.initiator -d iscsi_initiator=)
[ -n "$arg" ] && iscsi_initiator="$arg"
arg=$(getargs rd.iscsi.target.name -d iscsi_target_name=)
[ -n "$arg" ] && iscsi_target_name="$arg"
arg=$(getargs rd.iscsi.target.ip -d iscsi_target_ip)
[ -n "$arg" ] && iscsi_target_ip="$arg"
arg=$(getargs rd.iscsi.target.port -d iscsi_target_port=)
[ -n "$arg" ] && iscsi_target_port="$arg"
arg=$(getargs rd.iscsi.target.group -d iscsi_target_group=)
[ -n "$arg" ] && iscsi_target_group="$arg"
arg=$(getargs rd.iscsi.username -d iscsi_username=)
[ -n "$arg" ] && iscsi_username="$arg"
arg=$(getargs rd.iscsi.password -d iscsi_password)
[ -n "$arg" ] && iscsi_password="$arg"
arg=$(getargs rd.iscsi.in.username -d iscsi_in_username=)
[ -n "$arg" ] && iscsi_in_username="$arg"
arg=$(getargs rd.iscsi.in.password -d iscsi_in_password=)
[ -n "$arg" ] && iscsi_in_password="$arg"
for p in $(getargs rd.iscsi.param -d iscsi_param); do
iscsi_param="$iscsi_param --param $p"
done
parse_iscsi_root "$1" || return 1
# Bail out early, if there is no route to the destination
if is_ip "$iscsi_target_ip" && [ "$netif" != "timeout" ] && ! all_ifaces_setup && getargbool 1 rd.iscsi.testroute; then
ip route get "$iscsi_target_ip" >/dev/null 2>&1 || return 0
fi
# XXX is this needed?
getarg ro && iscsirw=ro
getarg rw && iscsirw=rw
fsopts="${fsopts:+$fsopts,}${iscsirw}"
if [ -z "$iscsi_initiator" ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then
iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
systemctl restart iscsid
sleep 1
> /tmp/iscsi_set_initiator
fi
if [ -z "$iscsi_initiator" ]; then
[ -f /run/initiatorname.iscsi ] && . /run/initiatorname.iscsi
[ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
[ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
iscsi_initiator=$InitiatorName
fi
if [ -z "$iscsi_initiator" ]; then
iscsi_initiator=$(iscsi-iname)
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
systemctl restart iscsid
> /tmp/iscsi_set_initiator
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
if [ -z $iscsi_target_port ]; then
iscsi_target_port=3260
fi
if [ -z $iscsi_target_group ]; then
iscsi_target_group=1
fi
if [ -z $iscsi_lun ]; then
iscsi_lun=0
fi
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
fi
# FIXME $iscsi_protocol??
if [ "$root" = "dhcp" ] || [ "$netroot" = "dhcp" ]; then
# if root is not specified try to mount the whole iSCSI LUN
printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' "${iscsi_lun//\"/}" >> /etc/udev/rules.d/99-iscsi-root.rules
udevadm control --reload
write_fs_tab /dev/root
wait_for_dev -n /dev/root
# install mount script
[ -z "$DRACUT_SYSTEMD" ] && \
printf 'iscsi_lun=%q . /bin/mount-lun.sh\n' "$iscsi_lun" > "$hookdir"/mount/01-$$-iscsi.sh
fi
if [ -n "$DRACUT_SYSTEMD" ] && command -v systemd-run >/dev/null 2>&1; then
netroot_enc=$(systemd-escape "iscsistart_${1}")
status=$(systemctl is-active "$netroot_enc" 2>/dev/null)
is_active=$?
if [ $is_active -ne 0 ]; then
if [ "$status" != "activating" ] && ! systemctl is-failed "$netroot_enc" >/dev/null 2>&1; then
systemd-run --service-type=oneshot --remain-after-exit --quiet \
--description="Login iSCSI Target $iscsi_target_name" \
-p 'DefaultDependencies=no' \
--unit="$netroot_enc" -- \
$(command -v iscsistart) \
-i "$iscsi_initiator" -t "$iscsi_target_name" \
-g "$iscsi_target_group" -a "$iscsi_target_ip" \
-p "$iscsi_target_port" \
${iscsi_username:+-u "$iscsi_username"} \
${iscsi_password:+-w "$iscsi_password"} \
${iscsi_in_username:+-U "$iscsi_in_username"} \
${iscsi_in_password:+-W "$iscsi_in_password"} \
${iscsi_iface_name:+--param "iface.iscsi_ifacename=$iscsi_iface_name"} \
${iscsi_netdev_name:+--param "iface.net_ifacename=$iscsi_netdev_name"} \
${iscsi_param} >/dev/null 2>&1 \
&& { > $hookdir/initqueue/work ; }
while : ; do
status=$(systemctl is-active "$netroot_enc" 2>/dev/null)
[ "$status" != "activating" ] && break
sleep 1
done
else
systemctl --no-block restart "$netroot_enc" >/dev/null 2>&1 \
&& { > $hookdir/initqueue/work ; }
fi
fi
else
iscsistart -i "$iscsi_initiator" -t "$iscsi_target_name" \
-g "$iscsi_target_group" -a "$iscsi_target_ip" \
-p "$iscsi_target_port" \
${iscsi_username:+-u "$iscsi_username"} \
${iscsi_password:+-w "$iscsi_password"} \
${iscsi_in_username:+-U "$iscsi_in_username"} \
${iscsi_in_password:+-W "$iscsi_in_password"} \
${iscsi_iface_name:+--param "iface.iscsi_ifacename=$iscsi_iface_name"} \
${iscsi_netdev_name:+--param "iface.net_ifacename=$iscsi_netdev_name"} \
${iscsi_param} \
&& { > $hookdir/initqueue/work ; }
fi
netroot_enc=$(str_replace "$1" '/' '\2f')
echo 'started' > "/tmp/iscsistarted-iscsi:${netroot_enc}"
return 0
}
ret=0
if [ "$netif" != "timeout" ] && getargbool 1 rd.iscsi.waitnet; then
all_ifaces_setup || exit 0
fi
if [ "$netif" = "timeout" ] && all_ifaces_setup; then
# s.th. went wrong and the timeout script hits
# restart
systemctl restart iscsid
# damn iscsid is not ready after unit says it's ready
sleep 2
fi
if getargbool 0 rd.iscsi.firmware -d -y iscsi_firmware ; then
if [ "$netif" = "timeout" ] || [ "$netif" = "online" ]; then
handle_firmware
ret=$?
fi
fi
if ! [ "$netif" = "online" ]; then
# loop over all netroot parameter
if nroot=$(getarg netroot) && [ "$nroot" != "dhcp" ]; then
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
nroot="${nroot##iscsi:}"
if [ -n "$nroot" ]; then
handle_netroot "$nroot"
ret=$(($ret + $?))
fi
done
else
if [ -n "$iroot" ]; then
handle_netroot "$iroot"
ret=$?
fi
fi
fi
need_shutdown
# now we have a root filesystem somewhere in /dev/sd*
# let the normal block handler handle root=
exit $ret
95iscsi/module-setup.sh 0000755 00000012756 15272355671 0011046 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _rootdev
# If our prerequisites are not met, fail anyways.
require_binaries iscsistart hostname iscsi-iname || return 1
# If hostonly was requested, fail the check if we are not actually
# booting from root.
is_iscsi() {
local _dev=$1
[[ -L "/sys/dev/block/$_dev" ]] || return
cd "$(readlink -f "/sys/dev/block/$_dev")"
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]]
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
pushd . >/dev/null
for_each_host_dev_and_slaves is_iscsi
local _is_iscsi=$?
popd >/dev/null
[[ $_is_iscsi == 0 ]] || return 255
}
return 0
}
get_ibft_mod() {
local ibft_mac=$1
local iface_mac iface_mod
# Return the iSCSI offload module for a given MAC address
for iface_desc in $(iscsiadm -m iface | cut -f 2 -d ' '); do
iface_mod=${iface_desc%%,*}
iface_mac=${iface_desc#*,}
iface_mac=${iface_mac%%,*}
if [ "$ibft_mac" = "$iface_mac" ] ; then
echo $iface_mod
return 0
fi
done
}
install_ibft() {
# When iBFT / iscsi_boot is detected:
# - Use 'ip=ibft' to set up iBFT network interface
# Note: bnx2i is using a different MAC address of iSCSI offloading
# so the 'ip=ibft' parameter must not be set
# - specify firmware booting cmdline parameter
for d in /sys/firmware/* ; do
if [ -d ${d}/ethernet0 ] ; then
read ibft_mac < ${d}/ethernet0/mac
ibft_mod=$(get_ibft_mod $ibft_mac)
fi
if [ -z "$ibft_mod" ] && [ -d ${d}/ethernet1 ] ; then
read ibft_mac < ${d}/ethernet1/mac
ibft_mod=$(get_ibft_mod $ibft_mac)
fi
if [ -d ${d}/initiator ] ; then
if [ ${d##*/} = "ibft" ] && [ "$ibft_mod" != "bnx2i" ] ; then
echo -n "ip=ibft "
fi
echo -n "rd.iscsi.firmware=1"
fi
done
}
depends() {
echo network rootfs-block
}
installkernel() {
local _arch=$(uname -m)
instmods bnx2i qla4xxx cxgb3i cxgb4i be2iscsi
hostonly="" instmods iscsi_tcp iscsi_ibft crc32c iscsi_boot_sysfs
iscsi_module_filter() {
local _funcs='iscsi_register_transport'
# subfunctions inherit following FDs
local _merge=8 _side2=9
function bmf1() {
local _f
while read _f; do
case "$_f" in
*.ko) [[ $(< $_f) =~ $_funcs ]] && echo "$_f" ;;
*.ko.gz) [[ $(gzip -dc <$_f) =~ $_funcs ]] && echo "$_f" ;;
*.ko.xz) [[ $(xz -dc <$_f) =~ $_funcs ]] && echo "$_f" ;;
esac
done
return 0
}
function rotor() {
local _f1 _f2
while read _f1; do
echo "$_f1"
if read _f2; then
echo "$_f2" 1>&${_side2}
fi
done | bmf1 1>&${_merge}
return 0
}
# Use two parallel streams to filter alternating modules.
set +x
eval "( ( rotor ) ${_side2}>&1 | bmf1 ) ${_merge}>&1"
[[ $debug ]] && set -x
return 0
}
{ find_kernel_modules_by_path drivers/scsi; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/scsi; fi;} \
| iscsi_module_filter | instmods
}
cmdline() {
install_ibft
}
# called by dracut
install() {
inst_multiple umount iscsistart hostname iscsi-iname
inst_multiple -o iscsiuio
inst_libdir_file 'libgcc_s.so*'
# Detect iBFT and perform mandatory steps
if [[ $hostonly_cmdline == "yes" ]] ; then
local _ibftconf=$(install_ibft)
[[ $_ibftconf ]] && printf "%s\n" "$_ibftconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf"
fi
inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
inst_hook cleanup 90 "$moddir/cleanup-iscsi.sh"
inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot"
if ! dracut_module_included "systemd"; then
inst "$moddir/mount-lun.sh" "/bin/mount-lun.sh"
else
inst_multiple -o \
$systemdsystemunitdir/iscsi.service \
$systemdsystemunitdir/iscsid.service \
$systemdsystemunitdir/iscsid.socket \
$systemdsystemunitdir/iscsiuio.service \
$systemdsystemunitdir/iscsiuio.socket \
iscsiadm iscsid
mkdir -p "${initdir}/$systemdsystemunitdir/sockets.target.wants"
for i in \
iscsiuio.socket \
; do
ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/sockets.target.wants/${i}"
done
mkdir -p "${initdir}/$systemdsystemunitdir/basic.target.wants"
for i in \
iscsid.service \
; do
ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/basic.target.wants/${i}"
done
# Make sure iscsid is started after dracut-cmdline and ready for the initqueue
mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.service.d"
(
echo "[Unit]"
echo "After=dracut-cmdline.service"
echo "Before=dracut-initqueue.service"
) > "${initdir}/$systemdsystemunitdir/iscsid.service.d/dracut.conf"
fi
inst_dir /var/lib/iscsi
dracut_need_initqueue
}
95iscsi/mount-lun.sh 0000755 00000000672 15272355671 0010353 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -z $iscsi_lun ]; then
iscsi_lun=0
fi
NEWROOT=${NEWROOT:-"/sysroot"}
for disk in /dev/disk/by-path/*-iscsi-*-$iscsi_lun; do
if mount -t ${fstype:-auto} -o "$rflags" $disk $NEWROOT; then
if [ ! -d $NEWROOT/proc ]; then
umount $disk
continue
fi
break
fi
done
95nbd/nbdroot.sh 0000755 00000006052 15272355672 0007514 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# Huh? Empty $2?
[ -z "$2" ] && exit 1
# Huh? Empty $3?
[ -z "$3" ] && exit 1
# root is in the form root=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
netif="$1"
nroot="$2"
NEWROOT="$3"
# If it's not nbd we don't continue
[ "${nroot%%:*}" = "nbd" ] || return
nroot=${nroot#nbd:}
nbdserver=${nroot%%:*}; nroot=${nroot#*:}
nbdport=${nroot%%:*}; nroot=${nroot#*:}
nbdfstype=${nroot%%:*}; nroot=${nroot#*:}
nbdflags=${nroot%%:*}
nbdopts=${nroot#*:}
# If nbdport not an integer, then assume name based import
if [ ! -z $(echo "$nbdport" | sed 's/[0-9]//g') ]; then
nbdport="-N $nbdport"
fi
if [ "$nbdopts" = "$nbdflags" ]; then
unset nbdopts
fi
if [ "$nbdflags" = "$nbdfstype" ]; then
unset nbdflags
fi
if [ "$nbdfstype" = "$nbdport" ]; then
unset nbdfstype
fi
if [ -z "$nbdfstype" ]; then
nbdfstype=auto
fi
# look through the NBD options and pull out the ones that need to
# go before the host etc. Append a ',' so we know we terminate the loop
nbdopts=${nbdopts},
while [ -n "$nbdopts" ]; do
f=${nbdopts%%,*}
nbdopts=${nbdopts#*,}
if [ -z "$f" ]; then
break
fi
if [ -z "${f%bs=*}" -o -z "${f%timeout=*}" ]; then
preopts="$preopts $f"
continue
fi
opts="$opts $f"
done
# look through the flags and see if any are overridden by the command line
nbdflags=${nbdflags},
while [ -n "$nbdflags" ]; do
f=${nbdflags%%,*}
nbdflags=${nbdflags#*,}
if [ -z "$f" ]; then
break
fi
if [ "$f" = "ro" -o "$f" = "rw" ]; then
nbdrw=$f
continue
fi
fsopts=${fsopts:+$fsopts,}$f
done
getarg ro && nbdrw=ro
getarg rw && nbdrw=rw
fsopts=${fsopts:+$fsopts,}${nbdrw}
# XXX better way to wait for the device to be made?
i=0
while [ ! -b /dev/nbd0 ]; do
[ $i -ge 20 ] && exit 1
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=/dev/nbd0
else
sleep 0.1
fi
i=$(($i + 1))
done
# If we didn't get a root= on the command line, then we need to
# add the udev rules for mounting the nbd0 device
if [ "$root" = "block:/dev/root" -o "$root" = "dhcp" ]; then
printf 'KERNEL=="nbd0", ENV{DEVTYPE}!="partition", ENV{ID_FS_TYPE}=="?*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-nbd-root.rules
udevadm control --reload
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
write_fs_tab /dev/root "$nbdfstype" "$fsopts"
wait_for_dev -n /dev/root
if [ -z "$DRACUT_SYSTEMD" ]; then
printf '/bin/mount %s\n' \
"$NEWROOT" \
> $hookdir/mount/01-$$-nbd.sh
fi
fi
if strstr "$(nbd-client --help 2>&1)" "systemd-mark"; then
preopts="--systemd-mark $preopts"
fi
nbd-client $preopts "$nbdserver" $nbdport /dev/nbd0 $opts || exit 1
# NBD doesn't emit uevents when it gets connected, so kick it
echo change > /sys/block/nbd0/uevent
udevadm settle
need_shutdown
exit 0
95nbd/parse-nbdroot.sh 0000755 00000003230 15272355672 0010617 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Preferred format:
# root=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
# [root=*] netroot=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
#
# nbdopts is a comma separated list of options to give to nbd-client
#
# root= takes precedence over netroot= if root=nbd[...]
#
# Sadly there's no easy way to split ':' separated lines into variables
netroot_to_var() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
unset server port
server=$2; port=$3;
}
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "${netroot%%:*}" = "nbd" ] && break
done
[ "${netroot%%:*}" = "nbd" ] || unset netroot
fi
# Root takes precedence over netroot
if [ "${root%%:*}" = "nbd" ] ; then
if [ -n "$netroot" ] ; then
warn "root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
unset root
fi
# If it's not nbd we don't continue
[ "${netroot%%:*}" = "nbd" ] || return
# Check required arguments
netroot_to_var $netroot
[ -z "$server" ] && die "Argument server for nbdroot is missing"
[ -z "$port" ] && die "Argument port for nbdroot is missing"
# NBD actually supported?
incol2 /proc/devices nbd || modprobe nbd || die "nbdroot requested but kernel/initrd does not support nbd"
# Done, all good!
rootok=1
# Shut up init error check
if [ -z "$root" ]; then
root=block:/dev/root
wait_for_dev -n /dev/root
fi
95nbd/module-setup.sh 0000755 00000001600 15272355672 0010462 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _rootdev
# if an nbd device is not somewhere in the chain of devices root is
# mounted on, fail the hostonly check.
[[ $hostonly ]] || [[ $mount_needs ]] && {
is_nbd() { [[ -b /dev/block/$1 && $1 == 43:* ]] ;}
_rootdev=$(find_root_block_device)
[[ -b /dev/block/$_rootdev ]] || return 1
check_block_and_slaves is_nbd "$_rootdev" || return 255
}
require_binaries nbd-client || return 1
return 0
}
depends() {
# We depend on network modules being loaded
echo network rootfs-block
}
installkernel() {
instmods nbd
}
install() {
inst nbd-client
inst_hook cmdline 90 "$moddir/parse-nbdroot.sh"
inst_script "$moddir/nbdroot.sh" "/sbin/nbdroot"
dracut_need_initqueue
}
95udev-rules/61-persistent-storage.rules 0000644 00000001774 15272355672 0014206 0 ustar 00 SUBSYSTEM!="block", GOTO="pss_end"
ACTION!="add|change", GOTO="pss_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="pss_end"
ACTION=="change", KERNEL=="dm-[0-9]*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}!="1", GOTO="do_pss"
KERNEL=="cciss[0-9]*", GOTO="do_pss"
KERNEL=="nbd[0-9]*", GOTO="do_pss"
KERNEL=="md[0-9]*|md_d[0-9]*|md/*", GOTO="do_pss"
GOTO="pss_end"
LABEL="do_pss"
# by-path (parent device path)
ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="", DEVPATH!="*/virtual/*", IMPORT PATH_ID
ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
# by-label/by-uuid links (filesystem metadata)
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
LABEL="pss_end"
95udev-rules/module-setup.sh 0000755 00000006002 15272355672 0012013 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
install() {
local _i
# Fixme: would be nice if we didn't have to guess, which rules to grab....
# ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
# of the rules we want so that we just copy those in would be best
inst_multiple udevadm cat uname blkid \
/etc/udev/udev.conf
[ -d ${initdir}/$systemdutildir ] || mkdir -p ${initdir}/$systemdutildir
for _i in ${systemdutildir}/systemd-udevd ${udevdir}/udevd /sbin/udevd; do
[ -x "$_i" ] || continue
inst "$_i"
if ! [[ -f ${initdir}${systemdutildir}/systemd-udevd ]]; then
ln -fs "$_i" ${initdir}${systemdutildir}/systemd-udevd
fi
break
done
if ! [[ -e ${initdir}${systemdutildir}/systemd-udevd ]]; then
derror "Cannot find [systemd-]udevd binary!"
exit 1
fi
inst_rules \
40-redhat-cpu-hotplug.rules \
40-redhat.rules \
50-firmware.rules \
50-udev-default.rules \
50-udev.rules \
"$moddir/59-persistent-storage.rules" \
/59-persistent-storage.rules \
60-pcmcia.rules \
60-persistent-storage.rules \
61-persistent-storage-edd.rules \
"$moddir/61-persistent-storage.rules" \
70-uaccess.rules \
71-seat.rules \
73-seat-late.rules \
75-net-description.rules \
80-drivers.rules \
80-net-name-slot.rules \
95-late.rules \
95-udev-late.rules \
${NULL}
prepare_udev_rules 59-persistent-storage.rules 61-persistent-storage.rules
# debian udev rules
inst_rules 91-permissions.rules
{
for i in cdrom tape dialout floppy; do
if ! egrep -q "^$i:" "$initdir/etc/group" 2>/dev/null; then
if ! egrep "^$i:" /etc/group 2>/dev/null; then
case $i in
cdrom) echo "$i:x:11:";;
dialout) echo "$i:x:18:";;
floppy) echo "$i:x:19:";;
tape) echo "$i:x:33:";;
esac
fi
fi
done
} >> "$initdir/etc/group"
inst_multiple -o \
${udevdir}/ata_id \
${udevdir}/cdrom_id \
${udevdir}/create_floppy_devices \
${udevdir}/edd_id \
${udevdir}/firmware.sh \
${udevdir}/firmware \
${udevdir}/firmware.agent \
${udevdir}/hotplug.functions \
${udevdir}/fw_unit_symlinks.sh \
${udevdir}/hid2hci \
${udevdir}/path_id \
${udevdir}/input_id \
${udevdir}/scsi_id \
${udevdir}/usb_id \
${udevdir}/pcmcia-socket-startup \
${udevdir}/pcmcia-check-broken-cis
inst_multiple -o /etc/pcmcia/config.opts
[ -f /etc/arch-release ] && \
inst_script "$moddir/load-modules.sh" /lib/udev/load-modules.sh
inst_libdir_file "libnss_files*"
}
95udev-rules/load-modules.sh 0000755 00000000274 15272355672 0011762 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# Implement blacklisting for udev-loaded modules
modprobe -b "$@"
95udev-rules/59-persistent-storage.rules 0000644 00000000424 15272355672 0014204 0 ustar 00 SUBSYSTEM!="block", GOTO="ps_end"
ACTION!="add|change", GOTO="ps_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="ps_end"
KERNEL=="cciss[0-9]*", IMPORT BLKID
KERNEL=="nbd[0-9]*", IMPORT BLKID
LABEL="ps_end"
90lvm/module-setup.sh 0000755 00000011412 15272355672 0010512 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
# No point trying to support lvm if the binaries are missing
require_binaries lvm || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs = LVM*_member ]] && return 0
done
return 255
}
return 0
}
depends() {
# We depend on dm_mod being loaded
echo rootfs-block dm
return 0
}
# called by dracut
cmdline() {
local _activated
declare -A _activated
for dev in "${!host_fs_types[@]}"; do
[ -e /sys/block/${dev#/dev/}/dm/name ] || continue
[ -e /sys/block/${dev#/dev/}/dm/uuid ] || continue
uuid=$(</sys/block/${dev#/dev/}/dm/uuid)
[[ "${uuid#LVM-}" == "$uuid" ]] && continue
dev=$(</sys/block/${dev#/dev/}/dm/name)
eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null)
[[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 1
if ! [[ ${_activated[${DM_VG_NAME}/${DM_LV_NAME}]} ]]; then
printf " rd.lvm.lv=%s\n" "${DM_VG_NAME}/${DM_LV_NAME} "
_activated["${DM_VG_NAME}/${DM_LV_NAME}"]=1
fi
done
}
installkernel() {
hostonly='' instmods dm-snapshot
}
# called by dracut
install() {
local _i
inst lvm
if [[ $hostonly_cmdline == "yes" ]]; then
cmdline >> "${initdir}/etc/cmdline.d/90lvm.conf"
echo >> "${initdir}/etc/cmdline.d/90lvm.conf"
fi
inst_rules "$moddir/64-lvm.rules"
if [[ $hostonly ]] || [[ $lvmconf = "yes" ]]; then
for f in /etc/lvm/lvm.conf /etc/lvm/lvm_*.conf; do
[ -e "$f" ] || continue
inst_simple "$f"
if [ -f "${initdir}/$f" ]; then
# FIXME: near-term hack to establish read-only locking;
# use command-line lvm.conf editor once it is available
sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' "${initdir}/$f"
sed -i -e 's/\(^[[:space:]]*\)use_lvmetad[[:space:]]*=[[:space:]]*[[:digit:]]/\1use_lvmetad = 0/' "${initdir}/$f"
fi
done
fi
if ! [[ -e ${initdir}/etc/lvm/lvm.conf ]]; then
mkdir -p "${initdir}/etc/lvm"
{
echo 'global {'
echo 'locking_type = 4'
echo 'use_lvmetad = 0'
echo '}'
} > "${initdir}/etc/lvm/lvm.conf"
fi
inst_rules 11-dm-lvm.rules 69-dm-lvm-metad.rules
# Do not run lvmetad update via pvscan in udev rule - lvmetad is not running yet in dracut!
if [[ -f ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules ]]; then
if grep -q SYSTEMD_WANTS ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules; then
sed -i -e 's/^ENV{SYSTEMD_ALIAS}=.*/# No LVM pvscan in dracut - lvmetad is not running yet/' \
${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
sed -i -e 's/^ENV{ID_MODEL}=.*//' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
sed -i -e 's/^ENV{SYSTEMD_WANTS}=.*//' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
else
sed -i -e 's/.*lvm pvscan.*/# No LVM pvscan for in dracut - lvmetad is not running yet/' \
${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
fi
fi
# Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
# files, but provides the one below:
inst_rules 64-device-mapper.rules
# debian udev rules
inst_rules 56-lvm.rules 60-persistent-storage-lvm.rules
inst_script "$moddir/lvm_scan.sh" /sbin/lvm_scan
inst_hook cmdline 30 "$moddir/parse-lvm.sh"
inst_libdir_file "libdevmapper-event-lvm*.so"
if [[ $hostonly ]] && type -P lvs &>/dev/null; then
for dev in "${!host_fs_types[@]}"; do
[ -e /sys/block/${dev#/dev/}/dm/name ] || continue
dev=$(</sys/block/${dev#/dev/}/dm/name)
eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null)
[[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || continue
case "$(lvs --noheadings -o segtype ${DM_VG_NAME} 2>/dev/null)" in
*thin*|*cache*|*era*)
inst_multiple -o thin_dump thin_restore thin_check thin_repair \
cache_dump cache_restore cache_check cache_repair \
era_check era_dump era_invalidate era_restore
break;;
esac
done
fi
if ! [[ $hostonly ]]; then
inst_multiple -o thin_dump thin_restore thin_check thin_repair \
cache_dump cache_restore cache_check cache_repair \
era_check era_dump era_invalidate era_restore
fi
}
90lvm/parse-lvm.sh 0000755 00000001124 15272355672 0007774 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /etc/lvm/lvm.conf ] && ! getargbool 1 rd.lvm.conf -d -n rd_NO_LVMCONF; then
rm -f -- /etc/lvm/lvm.conf
fi
LV_DEVS="$(getargs rd.lvm.vg -d rd_LVM_VG=) $(getargs rd.lvm.lv -d rd_LVM_LV=)"
if ! getargbool 1 rd.lvm -d -n rd_NO_LVM \
|| ( [ -z "$LV_DEVS" ] && ! getargbool 0 rd.auto ); then
info "rd.lvm=0: removing LVM activation"
rm -f -- /etc/udev/rules.d/64-lvm*.rules
else
for dev in $LV_DEVS; do
wait_for_dev -n "/dev/$dev"
done
fi
90lvm/lvm_scan.sh 0000755 00000007126 15272355672 0007700 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# run lvm scan if udev has settled
extraargs="$@"
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
VGS=$(getargs rd.lvm.vg -d rd_LVM_VG=)
LVS=$(getargs rd.lvm.lv -d rd_LVM_LV=)
SNAPSHOT=$(getargs rd.lvm.snapshot -d rd_LVM_SNAPSHOT=)
SNAPSIZE=$(getargs rd.lvm.snapsize -d rd_LVM_SNAPSIZE=)
[ -d /etc/lvm ] || mkdir -m 0755 -p /etc/lvm
# build a list of devices to scan
lvmdevs=$(
for f in /tmp/.lvm_scan-*; do
[ -e "$f" ] || continue
printf '%s' "${f##/tmp/.lvm_scan-} "
done
)
if [ ! -e /etc/lvm/lvm.conf ]; then
{
echo 'devices {';
printf ' filter = [ '
for dev in $lvmdevs; do
printf '"a|^/dev/%s$|", ' $dev;
done;
echo '"r/.*/" ]';
echo '}';
# establish LVM locking
if [ -n $SNAPSHOT ]; then
echo 'global {';
echo ' locking_type = 1';
echo ' use_lvmetad = 0';
echo '}';
else
echo 'global {';
echo ' locking_type = 4';
echo ' use_lvmetad = 0';
echo '}';
fi
} > /etc/lvm/lvm.conf
lvmwritten=1
fi
check_lvm_ver() {
maj=$1
min=$2
ver=$3
# --poll is supported since 2.2.57
[ $4 -lt $maj ] && return 1
[ $4 -gt $maj ] && return 0
[ $5 -lt $min ] && return 1
[ $5 -gt $min ] && return 0
[ $6 -ge $ver ] && return 0
return 1
}
# hopefully this output format will never change, e.g.:
# LVM version: 2.02.53(1) (2009-09-25)
OLDIFS=$IFS
IFS=.
set $(lvm version 2>/dev/null)
IFS=$OLDIFS
maj=${1##*:}
min=$2
sub=${3%% *}
sub=${sub%%\(*};
check_lvm_ver 2 2 57 $maj $min $sub && \
nopoll="--poll n"
if check_lvm_ver 2 2 65 $maj $min $sub; then
sysinit=" --sysinit $extraargs"
fi
unset extraargs
export LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES=1
if [ -n "$SNAPSHOT" ] ; then
# HACK - this should probably be done elsewhere or turned into a function
# Enable read-write LVM locking
sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 1/' ${initdir}/etc/lvm/lvm.conf
# Expected SNAPSHOT format "<orig lv name>:<snap lv name>"
ORIG_LV=${SNAPSHOT%%:*}
SNAP_LV=${SNAPSHOT##*:}
info "Removing existing LVM snapshot $SNAP_LV"
lvm lvremove --force $SNAP_LV 2>&1| vinfo
# Determine snapshot size
if [ -z "$SNAPSIZE" ] ; then
SNAPSIZE=$(lvm lvs --noheadings --units m --options lv_size $ORIG_LV)
info "No LVM snapshot size provided, using size of $ORIG_LV ($SNAPSIZE)"
fi
info "Creating LVM snapshot $SNAP_LV ($SNAPSIZE)"
lvm lvcreate -s -n $SNAP_LV -L $SNAPSIZE $ORIG_LV 2>&1| vinfo
fi
if [ -n "$LVS" ] ; then
info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
lvm lvscan --ignorelockingfailure 2>&1 | vinfo
for LV in $LVS; do
if [ -z "$sysinit" ]; then
lvm lvchange --yes -K -ay --ignorelockingfailure $nopoll --ignoremonitoring $LV 2>&1 | vinfo
else
lvm lvchange --yes -K -ay $sysinit $LV 2>&1 | vinfo
fi
done
fi
if [ -z "$LVS" -o -n "$VGS" ]; then
info "Scanning devices $lvmdevs for LVM volume groups $VGS"
lvm vgscan --ignorelockingfailure 2>&1 | vinfo
if [ -z "$sysinit" ]; then
lvm vgchange -ay --ignorelockingfailure $nopoll --ignoremonitoring $VGS 2>&1 | vinfo
else
lvm vgchange -ay $sysinit $VGS 2>&1 | vinfo
fi
fi
if [ "$lvmwritten" ]; then
rm -f -- /etc/lvm/lvm.conf
fi
unset lvmwritten
udevadm settle
need_shutdown
90lvm/64-lvm.rules 0000644 00000001410 15272355672 0007626 0 ustar 00 # hacky rules to try to activate lvm when we get new block devs...
#
# Copyright 2008, Red Hat, Inc.
# Jeremy Katz <katzj@redhat.com>
SUBSYSTEM!="block", GOTO="lvm_end"
ACTION!="add|change", GOTO="lvm_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="lvm_end"
KERNEL=="dm-[0-9]*", ACTION=="add", GOTO="lvm_end"
ENV{ID_FS_TYPE}!="LVM?_member", GOTO="lvm_end"
PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
GOTO="lvm_end"
RUN+="/sbin/initqueue --settled --onetime --unique /sbin/lvm_scan"
RUN+="/sbin/initqueue --timeout --name 51-lvm_scan --onetime --unique /sbin/lvm_scan --partial"
RUN+="/bin/sh -c '>/tmp/.lvm_scan-%k;'"
LABEL="lvm_end"
95fcoe-uefi/module-setup.sh 0000755 00000001335 15272355672 0011566 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# called by dracut
check() {
local _fcoe_ctlr
[[ $hostonly ]] || [[ $mount_needs ]] && {
for c in /sys/bus/fcoe/devices/ctlr_* ; do
[ -L $c ] || continue
_fcoe_ctlr=$c
done
[ -z "$_fcoe_ctlr" ] && return 255
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
[ -d /sys/firmware/efi ] || return 255
}
require_binaries dcbtool fipvlan lldpad ip readlink || return 1
return 0
}
# called by dracut
depends() {
echo fcoe uefi-lib
return 0
}
# called by dracut
install() {
inst_hook cmdline 20 "$moddir/parse-uefifcoe.sh"
}
95fcoe-uefi/parse-uefifcoe.sh 0000755 00000002010 15272355672 0012027 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v get_fcoe_boot_mac >/dev/null || . /lib/uefi-lib.sh
command -v set_ifname >/dev/null || . /lib/net-lib.sh
print_fcoe_uefi_conf()
{
local mac dev vlan
mac=$(get_fcoe_boot_mac "$1")
[ -z "$mac" ] && return 1
dev=$(set_ifname fcoe $mac)
vlan=$(get_fcoe_boot_vlan "$1")
if [ "$vlan" -ne "0" ]; then
case "$vlan" in
[0-9]*)
printf "%s\n" "vlan=$dev.$vlan:$dev"
dev="$dev.$vlan"
;;
*)
printf "%s\n" "vlan=$vlan:$dev"
dev="$vlan"
;;
esac
fi
# fcoe=eth0:nodcb
printf "fcoe=%s\n" "$dev:nodcb"
return 0
}
for i in /sys/firmware/efi/vars/FcoeBootDevice-*/data; do
[ -e "$i" ] || continue
print_fcoe_uefi_conf $i > /etc/cmdline.d/40-fcoe-uefi.conf && break
done
99shutdown/module-setup.sh 0000755 00000001170 15272355673 0011601 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 0
}
depends() {
echo base
return 0
}
install() {
local _d
inst_multiple umount poweroff reboot halt losetup stat
inst_multiple -o kexec
inst "$moddir/shutdown.sh" "$prefix/shutdown"
[ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib
mkdir -m 0755 -p ${initdir}/lib/dracut
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks
for _d in $hookdirs shutdown shutdown-emergency; do
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d
done
}
99shutdown/shutdown.sh 0000755 00000006055 15272355673 0011040 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Licensed under the GPLv2
#
# Copyright 2011, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
ACTION="$1"
[ -w /dev/console ] && exec </dev/console >>/dev/console 2>>/dev/console
export TERM=linux
export PATH=/usr/sbin:/usr/bin:/sbin:/bin
. /lib/dracut-lib.sh
if [ "$(stat -c '%T' -f /)" = "tmpfs" ]; then
mount -o remount,rw /
fi
mkdir /oldsys
for i in sys proc run dev; do
mkdir /oldsys/$i
mount --move /oldroot/$i /oldsys/$i
done
# if "kexec" was installed after creating the initramfs, we try to copy it from the real root
# libz normally is pulled in via kmod/modprobe and udevadm
if [ "$ACTION" = "kexec" ] && ! command -v kexec >/dev/null 2>&1; then
for p in /usr/sbin /usr/bin /sbin /bin; do
cp -a /oldroot/${p}/kexec $p >/dev/null 2>&1 && break
done
hash kexec
fi
trap "emergency_shell --shutdown shutdown Signal caught!" 0
getarg 'rd.break=pre-shutdown' && emergency_shell --shutdown pre-shutdown "Break before pre-shutdown"
source_hook pre-shutdown
warn "Killing all remaining processes"
killall_proc_mountpoint /oldroot
umount_a() {
local _did_umount="n"
while read a mp a; do
if strstr "$mp" oldroot; then
if umount "$mp"; then
_did_umount="y"
warn "Unmounted $mp."
fi
fi
done </proc/mounts
losetup -D
[ "$_did_umount" = "y" ] && return 0
return 1
}
_cnt=0
while [ $_cnt -le 40 ]; do
umount_a 2>/dev/null || break
_cnt=$(($_cnt+1))
done
[ $_cnt -ge 40 ] && umount_a
if strstr "$(cat /proc/mounts)" "/oldroot"; then
warn "Cannot umount /oldroot"
for _pid in /proc/*; do
_pid=${_pid##/proc/}
case $_pid in
*[!0-9]*) continue;;
esac
[ $_pid -eq $$ ] && continue
[ -e "/proc/$_pid/exe" ] || continue
[ -e "/proc/$_pid/root" ] || continue
if strstr "$(ls -l /proc/$_pid /proc/$_pid/fd 2>/dev/null)" "oldroot"; then
warn "Blocking umount of /oldroot [$_pid] $(cat /proc/$_pid/cmdline)"
else
warn "Still running [$_pid] $(cat /proc/$_pid/cmdline)"
fi
ls -l "/proc/$_pid/exe" 2>&1 | vwarn
ls -l "/proc/$_pid/fd" 2>&1 | vwarn
done
fi
_check_shutdown() {
local __f
local __s=1
for __f in $hookdir/shutdown/*.sh; do
[ -e "$__f" ] || continue
( . "$__f" $1 )
if [ $? -eq 0 ]; then
rm -f -- $__f
__s=0
fi
done
return $__s
}
while _check_shutdown; do
:
done
_check_shutdown final
getarg 'rd.break=shutdown' && emergency_shell --shutdown shutdown "Break before shutdown"
case "$ACTION" in
reboot|poweroff|halt)
$ACTION -f -d -n
warn "$ACTION failed!"
;;
kexec)
kexec -e
warn "$ACTION failed!"
reboot -f -d -n
;;
*)
warn "Shutdown called with argument '$ACTION'. Rebooting!"
reboot -f -d -n
;;
esac
emergency_shell --shutdown shutdown
98ecryptfs/ecryptfs-mount.sh 0000755 00000005444 15272355673 0012150 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# Licensed under the GPLv2
#
# Copyright (C) 2011 Politecnico di Torino, Italy
# TORSEC group -- http://security.polito.it
# Roberto Sassu <roberto.sassu@polito.it>
ECRYPTFSCONFIG="${NEWROOT}/etc/sysconfig/ecryptfs"
ECRYPTFSKEYTYPE="encrypted"
ECRYPTFSKEYDESC="1000100010001000"
ECRYPTFSKEYID=""
ECRYPTFSSRCDIR="/secret"
ECRYPTFS_EXTRA_MOUNT_OPTS=""
load_ecryptfs_key()
{
# override the eCryptfs key path name from the 'ecryptfskey=' parameter in the kernel
# command line
ECRYPTFSKEYARG=$(getarg ecryptfskey=)
[ $? -eq 0 ] && \
ECRYPTFSKEY=${ECRYPTFSKEYARG}
# set the default value
[ -z "${ECRYPTFSKEY}" ] && \
ECRYPTFSKEY="/etc/keys/ecryptfs-trusted.blob";
# set the eCryptfs key path name
ECRYPTFSKEYPATH="${NEWROOT}${ECRYPTFSKEY}"
# check for eCryptfs encrypted key's existence
if [ ! -f "${ECRYPTFSKEYPATH}" ]; then
if [ "${RD_DEBUG}" = "yes" ]; then
info "eCryptfs: key file not found: ${ECRYPTFSKEYPATH}"
fi
return 1
fi
# read the eCryptfs encrypted key blob
KEYBLOB=$(cat ${ECRYPTFSKEYPATH})
# load the eCryptfs encrypted key blob
ECRYPTFSKEYID=$(keyctl add ${ECRYPTFSKEYTYPE} ${ECRYPTFSKEYDESC} "load ${KEYBLOB}" @u)
[ $? -eq 0 ] || {
info "eCryptfs: failed to load the eCryptfs key: ${ECRYPTFSKEYDESC}";
return 1;
}
return 0
}
unload_ecryptfs_key()
{
# unlink the eCryptfs encrypted key
keyctl unlink ${ECRYPTFSKEYID} @u || {
info "eCryptfs: failed to unlink the eCryptfs key: ${ECRYPTFSKEYDESC}";
return 1;
}
return 0
}
mount_ecryptfs()
{
# read the configuration from the config file
[ -f "${ECRYPTFSCONFIG}" ] && \
. ${ECRYPTFSCONFIG}
# load the eCryptfs encrypted key
load_ecryptfs_key || return 1
# set the default value for ECRYPTFSDSTDIR
[ -z "${ECRYPTFSDSTDIR}" ] && \
ECRYPTFSDSTDIR=${ECRYPTFSSRCDIR}
# set the eCryptfs filesystem mount point
ECRYPTFSSRCMNT="${NEWROOT}${ECRYPTFSSRCDIR}"
ECRYPTFSDSTMNT="${NEWROOT}${ECRYPTFSDSTDIR}"
# build the mount options variable
ECRYPTFS_MOUNT_OPTS="ecryptfs_sig=${ECRYPTFSKEYDESC}"
[ ! -z "${ECRYPTFS_EXTRA_MOUNT_OPTS}" ] && \
ECRYPTFS_MOUNT_OPTS="${ECRYPTFS_MOUNT_OPTS},${ECRYPTFS_EXTRA_MOUNT_OPTS}"
# mount the eCryptfs filesystem
info "Mounting the configured eCryptfs filesystem"
mount -i -t ecryptfs -o${ECRYPTFS_MOUNT_OPTS} ${ECRYPTFSSRCMNT} ${ECRYPTFSDSTMNT} >/dev/null || {
info "eCryptfs: mount of the eCryptfs filesystem failed";
return 1;
}
# unload the eCryptfs encrypted key
unload_ecryptfs_key || return 1
return 0
}
mount_ecryptfs
98ecryptfs/README 0000644 00000004447 15272355673 0007474 0 ustar 00 # Directions for creating the encrypted key that will be used to mount an
# eCryptfs filesystem
# Create the eCryptfs key (encrypted key type)
#
# The encrypted key type supports two formats: the 'default' format allows
# to generate a random symmetric key of the length specified, the 'ecryptfs'
# format generates an authentication token for the eCryptfs filesystem,
# which contains a randomly generated key. Two requirements for the latter
# format is that the key description must contain exactly 16 hexadecimal
# characters and that the encrypted key length must be equal to 64.
$ keyctl add encrypted 1000100010001000 "new ecryptfs trusted:kmk-trusted 64" @u
782117972
# Save the encrypted key
$ su -c 'keyctl pipe `keyctl search @u encrypted 1000100010001000` > /etc/keys/ecryptfs-trusted.blob'
# The eCryptfs key path name can be set in one of the following ways (specified in
# the order in which the variable is overwritten):
1) use the default value:
--------------------------------------------------------------------------
ECRYPTFSKEY="/etc/keys/ecryptfs-trusted.blob"
--------------------------------------------------------------------------
2) create the configuration file '/etc/sysconfig/ecryptfs' and set the ECRYPTFSKEY
variable;
3) specify the eCryptfs key path name in the 'ecryptfskey=' parameter of the kernel command
line.
# The configuration file '/etc/sysconfig/ecryptfs' is also used to specify
# more options for mounting the eCryptfs filesystem:
ECRYPTFSSRCDIR: existent directory in the lower root filesystem;
ECRYPTFSDSTDIR: mount point directory for the eCryptfs filesystem (the directory must be
created in the root filesystem before rebooting the platform);
ECRYPTFS_EXTRA_MOUNT_OPTS: extra mount options for the eCryptfs filesystem (the 'ecryptfs_sig'
option is automatically added by the dracut script).
# Example of the configuration file:
----------- '/etc/sysconfig/ecryptfs' (with default values) -----------
ECRYPTFS_KEY="/etc/keys/ecryptfs-trusted.blob"
ECRYPTFSSRCDIR="/secret"
ECRYPTFSDSTDIR="${ECRYPTFSSRCDIR}"
ECRYPTFS_EXTRA_MOUNT_OPTS=""
-----------------------------------------------------------------------
# If the variable ECRYPTFSDSTDIR is not specified in the configuration file,
# its value will be equal to that of ECRYPTFSSRCDIR.
98ecryptfs/module-setup.sh 0000755 00000000466 15272355673 0011573 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 255
}
depends() {
echo masterkey
return 0
}
installkernel() {
instmods ecryptfs
}
install() {
inst_hook pre-pivot 63 "$moddir/ecryptfs-mount.sh"
}
10i18n/README 0000644 00000010504 15272355673 0006363 0 ustar 00 dracut i18n module
------------------
INDEX
0. Introduction
1. Hostonly vs Generic
2. Configuration
2.1. Variables
2.2. Setting up mappings
2.3. Additional settings
3. Kernel parameters
~
0. Introduction
i18n module provides internationalization for initramfs at runtime. It
is intended to be generic across different GNU/Linux distributions.
i18n and keyboard settings are stored in different files among
distributions. To deal with it avoiding hardcoding those differences in
the installation script we handle it by mappings between variables used
by dracut and the ones in the system. Package maintainer is expected to
create those for his/her distribution and it's appreciated to share it
with us, so we can include it in source package.
1. Hostonly vs Generic
If you invoke dracut with '-H' option, i18n module install script will
gather variables values from your configuration files using mappings
provided in "/etc/dracut.conf.d/<foo>.conf". Those variables will be
put in "etc/vconsole.conf" and "etc/locale.conf" files inside initramfs
image. Next it will install only declared font, keymaps and so.
When building generic image (dracut without '-H' option), install script
copies all content of directories: consolefonts, consoletrans, unimaps
and keymaps to image. Take into account that's about 4 MiB.
2. Configuration
2.1. Variables
The following variables are used by i18n install script and at initramfs
runtime:
KEYMAP - keyboard translation table loaded by loadkeys
KEYTABLE - base name for keyboard translation table; if UNICODE is
true, Unicode version will be loaded. Overrides KEYMAP.
EXT_KEYMAPS - list of extra keymaps to bo loaded (sep. by space)
UNICODE - boolean, indicating UTF-8 mode
FONT - console font
FONT_MAP - see description of '-m' parameter in setfont manual
FONT_UNIMAP - see description of '-u' parameter in setfont manual
The following are appended to EXT_KEYMAPS only during build time:
UNIKEYMAP
GRP_TOGGLE
They were used in 10redhat-i18n module, but not sure of its purpose.
I'm leaving it in case... The following are taken from the environment:
LANG
LC_ALL
If UNICODE variable is not provided, script indicates if UTF-8 should be
used on the basis of LANG value (if it ends with ".utf8" or similar).
2.2. Setting up mappings
Mappings between variables listed in 2.1. and the ones spread around
your system are set up in /etc/dracut.conf.d/<foo>.conf. You need to
assign mappings to i18n_vars. Here's an example:
i18n_vars="/etc/conf.d/keymaps:KEYMAP,EXTENDED_KEYMAPS-EXT_KEYMAPS /etc/conf.d/consolefont:CONSOLEFONT-FONT,CONSOLETRANSLATION-FONT_MAP /etc/rc.conf:UNICODE"
First we've got name of file in host file system tree. After colon
there's mapping: <from>-<to>. If both variables have the same name you
can enter just a single, but it's important to specify it! The module
will source only variables you've listed.
Below there's detailed description in BNF:
<list> ::= <element> | <element> " " <list>
<element> ::= <conf-file-name> ":" <map-list>
<map-list> ::= <mapping> | <mapping> "," <map-list>
<mapping> ::= <src-var> "-" <dst-var> | <src-var>
We assume no whitespace are allowed between symbols.
<conf-file-name> is a file holding <src-var> in your system.
<src-var> is a variable holding value of meaning the same as <dst-var>.
<dst-var> is a variable which will be set up inside initramfs.
If <dst-var> has the same name as <src-var> we can omit <dst-var>.
Example:
/etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
<list> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
<element> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
<conf-file-name> = /etc/conf.d/keymaps
<map-list> = KEYMAP,extended_keymaps-EXT_KEYMAPS
<mapping> = KEYMAP
<src-var> = KEYMAP
<mapping> = extended_keymaps-EXT_KEYMAPS
<src-var> = extended_keymaps
<dst-var> = EXT_KEYMAPS
2.3. Additional settings
If you encounter following error message: "Directories consolefonts,
consoletrans, keymaps, unimaps not found.", you can provide path where
those directories lie in your system by setting kbddir in configuration
file (the same where you put mappings).
3. Kernel parameters
If you create generic initramfs you can set up i18n by kernel
parameters using variables listed in 2.1. (except of UNIKEYMAP
and GRP_TOGGLE) The recommended minimum is: FONT and KEYMAP.
10i18n/10-console.rules 0000644 00000000250 15272355673 0010434 0 ustar 00 # Console initialization - keyboard, font, etc.
KERNEL=="tty0", RUN+="/sbin/initqueue --onetime --unique --name console_init_$name /lib/udev/console_init $root/$name"
10i18n/parse-i18n.sh 0000755 00000002357 15272355673 0007740 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
inst_key_val() {
local _value
local _file
local _default
_default=$1
shift
_file=$1
shift
_value=$(getarg $@)
[ -z "${_value}" ] && _value=$_default
if [ -n "${_value}" ]; then
printf '%s="%s"\n' $2 ${_value} >> $_file
fi
unset _file
unset _value
}
inst_key_val '' /etc/vconsole.conf rd.vconsole.keymap vconsole.keymap KEYMAP -d KEYTABLE
inst_key_val '' /etc/vconsole.conf rd.vconsole.font vconsole.font FONT -d SYSFONT
inst_key_val '' /etc/vconsole.conf rd.vconsole.font.map vconsole.font.map FONT_MAP -d CONTRANS
inst_key_val '' /etc/vconsole.conf rd.vconsole.font.unimap vconsole.font.unimap FONT_UNIMAP -d UNIMAP
inst_key_val 1 /etc/vconsole.conf rd.vconsole.font.unicode vconsole.font.unicode UNICODE vconsole.unicode
inst_key_val '' /etc/vconsole.conf rd.vconsole.keymap.ext vconsole.keymap.ext EXT_KEYMAP
inst_key_val '' /etc/locale.conf rd.locale.LANG locale.LANG LANG
inst_key_val '' /etc/locale.conf rd.locale.LC_ALL locale.LC_ALL LC_ALL
if [ -f /etc/locale.conf ]; then
. /etc/locale.conf
export LANG
export LC_ALL
fi
10i18n/console_init.sh 0000755 00000003272 15272355673 0010533 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -n "$DRACUT_SYSTEMD" ] && exit 0
if [ -x $systemdutildir/systemd-vconsole-setup ]; then
$systemdutildir/systemd-vconsole-setup "$@"
fi
[ -e /etc/vconsole.conf ] && . /etc/vconsole.conf
DEFAULT_FONT=LatArCyrHeb-16
DEFAULT_KEYMAP=/etc/sysconfig/console/default.kmap
set_keyboard() {
local param
[ "${UNICODE}" = 1 ] && param=-u || param=-a
kbd_mode ${param}
}
set_terminal() {
local dev=$1
if [ "${UNICODE}" = 1 ]; then
printf '\033%%G' >&7
stty -F ${dev} iutf8
else
printf '\033%%@' >&7
stty -F ${dev} -iutf8
fi
}
set_keymap() {
local utf_switch
if [ -z "${KEYMAP}" ]; then
[ -f "${DEFAULT_KEYMAP}" ] && KEYMAP=${DEFAULT_KEYMAP}
fi
[ -n "${KEYMAP}" ] || return 1
[ "${UNICODE}" = 1 ] && utf_switch=-u
loadkeys -q ${utf_switch} ${KEYMAP} ${EXT_KEYMAPS}
}
set_font() {
local dev=$1; local trans=''; local uni=''
[ -z "${FONT}" ] && FONT=${DEFAULT_FONT}
[ -n "${FONT_MAP}" ] && trans="-m ${FONT_MAP}"
[ -n "${FONT_UNIMAP}" ] && uni="-u ${FONT_UNIMAP}"
setfont ${FONT} -C ${dev} ${trans} ${uni}
}
dev_close() {
exec 6>&-
exec 7>&-
}
dev_open() {
local dev=$1
exec 6<${dev} && \
exec 7>>${dev}
}
dev=/dev/${1#/dev/}
devname=${dev#/dev/}
[ -c "${dev}" ] || {
echo "Usage: $0 device" >&2
exit 1
}
dev_open ${dev}
for fd in 6 7; do
if ! [ -t ${fd} ]; then
echo "ERROR: File descriptor not opened: ${fd}" >&2
dev_close
exit 1
fi
done
set_keyboard
set_terminal ${dev}
set_font ${dev}
set_keymap
dev_close
10i18n/module-setup.sh 0000755 00000016467 15272355673 0010503 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
[[ "$mount_needs" ]] && return 1
require_binaries setfont loadkeys kbd_mode || return 1
return 0
}
depends() {
return 0
}
install() {
if dracut_module_included "systemd"; then
unset FONT
unset KEYMAP
[[ -f /etc/vconsole.conf ]] && . /etc/vconsole.conf
fi
KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
DEFAULT_FONT="${i18n_default_font:-LatArCyrHeb-16}"
I18N_CONF="/etc/locale.conf"
VCONFIG_CONF="/etc/vconsole.conf"
# This is from 10redhat-i18n.
findkeymap () {
local MAP=$1
[[ ! -f $MAP ]] && \
MAP=$(find ${kbddir}/keymaps -type f -name $MAP -o -name $MAP.\* | head -n1)
[[ " $KEYMAPS " = *" $MAP "* ]] && return
KEYMAPS="$KEYMAPS $MAP"
case $MAP in
*.gz) cmd=zgrep;;
*.bz2) cmd=bzgrep;;
*) cmd=grep ;;
esac
for INCL in $($cmd "^include " $MAP | while read a a b; do echo ${a//\"/}; done); do
for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do
findkeymap $FN
done
done
}
# Function gathers variables from distributed files among the tree, maps to
# specified names and prints the result in format "new-name=value".
#
# $@ = list in format specified below (BNF notation)
#
# <list> ::= <element> | <element> " " <list>
# <element> ::= <conf-file-name> ":" <map-list>
# <map-list> ::= <mapping> | <mapping> "," <map-list>
# <mapping> ::= <src-var> "-" <dst-var> | <src-var>
#
# We assume no whitespace are allowed between symbols.
# <conf-file-name> is a file holding <src-var> in your system.
# <src-var> is a variable holding value of meaning the same as <dst-var>.
# <dst-var> is a variable which will be set up inside initramfs.
# If <dst-var> has the same name as <src-var> we can omit <dst-var>.
#
# Example:
# /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
# <list> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
# <element> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
# <conf-file-name> = /etc/conf.d/keymaps
# <map-list> = KEYMAP,extended_keymaps-EXT_KEYMAPS
# <mapping> = KEYMAP
# <src-var> = KEYMAP
# <mapping> = extended_keymaps-EXT_KEYMAPS
# <src-var> = extended_keymaps
# <dst-var> = EXT_KEYMAPS
gather_vars() {
local item map value
for item in $@
do
item=(${item/:/ })
for map in ${item[1]//,/ }
do
map=(${map//-/ })
if [[ -f "${item[0]}" ]]; then
value=$(grep "^${map[0]}=" "${item[0]}")
value=${value#*=}
echo "${map[1]:-${map[0]}}=${value}"
fi
done
done
}
install_base() {
inst_multiple setfont loadkeys kbd_mode stty
if ! dracut_module_included "systemd"; then
inst ${moddir}/console_init.sh /lib/udev/console_init
inst_rules ${moddir}/10-console.rules
inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
fi
}
install_all_kbd() {
local rel f
for _src in $(eval echo ${kbddir}/{${KBDSUBDIRS}}); do
inst_dir "$_src"
cp --reflink=auto --sparse=auto -prfL -t "${initdir}/${_src}" "$_src"/*
done
# remove unnecessary files
rm -f -- "${initdir}${kbddir}/consoletrans/utflist"
find "${initdir}${kbddir}/" -name README\* -delete
find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
| while read line; do
inst_multiple gzip
done
find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
| while read line; do
inst_multiple bzip2
done
}
install_local_i18n() {
local map
eval $(gather_vars ${i18n_vars})
[ -f $I18N_CONF ] && . $I18N_CONF
[ -f $VCONFIG_CONF ] && . $VCONFIG_CONF
shopt -q -s nocasematch
if [[ ${UNICODE} ]]
then
if [[ ${UNICODE} = YES || ${UNICODE} = 1 ]]
then
UNICODE=1
elif [[ ${UNICODE} = NO || ${UNICODE} = 0 ]]
then
UNICODE=0
else
UNICODE=''
fi
fi
if [[ ! ${UNICODE} && ${LANG} =~ .*\.UTF-?8 ]]
then
UNICODE=1
fi
shopt -q -u nocasematch
# Gentoo user may have KEYMAP set to something like "-u pl2",
KEYMAP=${KEYMAP#-* }
# KEYTABLE is a bit special - it defines base keymap name and UNICODE
# determines whether non-UNICODE or UNICODE version is used
if [[ ${KEYTABLE} ]]; then
if [[ ${UNICODE} == 1 ]]; then
[[ ${KEYTABLE} =~ .*\.uni.* ]] || KEYTABLE=${KEYTABLE%.map*}.uni
fi
KEYMAP=${KEYTABLE}
fi
# I'm not sure of the purpose of UNIKEYMAP and GRP_TOGGLE. They were in
# original redhat-i18n module. Anyway it won't hurt.
EXT_KEYMAPS+=\ ${UNIKEYMAP}\ ${GRP_TOGGLE}
[[ ${KEYMAP} ]] || {
dinfo 'No KEYMAP configured.'
return 1
}
findkeymap ${KEYMAP}
for map in ${EXT_KEYMAPS}
do
ddebug "Adding extra map: ${map}"
findkeymap ${map}
done
inst_opt_decompress ${KEYMAPS}
inst_opt_decompress ${kbddir}/consolefonts/${DEFAULT_FONT}.*
if [[ ${FONT} ]] && [[ ${FONT} != ${DEFAULT_FONT} ]]
then
FONT=${FONT%.psf*}
inst_opt_decompress ${kbddir}/consolefonts/${FONT}.*
fi
if [[ ${FONT_MAP} ]]
then
FONT_MAP=${FONT_MAP%.trans}
inst_simple ${kbddir}/consoletrans/${FONT_MAP}.trans
fi
if [[ ${FONT_UNIMAP} ]]
then
FONT_UNIMAP=${FONT_UNIMAP%.uni}
inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni
fi
if dracut_module_included "systemd" && [[ -f ${I18N_CONF} ]]; then
inst_simple ${I18N_CONF}
else
mksubdirs ${initdir}${I18N_CONF}
print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
fi
if dracut_module_included "systemd" && [[ -f ${VCONFIG_CONF} ]]; then
inst_simple ${VCONFIG_CONF}
else
mksubdirs ${initdir}${VCONFIG_CONF}
print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
fi
return 0
}
checks() {
for kbddir in ${kbddir} /usr/lib/kbd /lib/kbd /usr/share /usr/share/kbd
do
[[ -d "${kbddir}" ]] && \
for dir in ${KBDSUBDIRS//,/ }
do
[[ -d "${kbddir}/${dir}" ]] && continue
false
done && break
kbddir=''
done
[[ -f $I18N_CONF && -f $VCONFIG_CONF ]] || \
[[ ! ${hostonly} || ${i18n_vars} ]] || {
derror 'i18n_vars not set! Please set up i18n_vars in ' \
'configuration file.'
}
return 0
}
if checks; then
install_base
if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} == "yes" ]]; then
install_local_i18n || install_all_kbd
else
install_all_kbd
fi
fi
}
97biosdevname/parse-biosdevname.sh 0000755 00000000642 15272355673 0013204 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if ! getargbool 1 biosdevname; then
info "biosdevname=0: removing biosdevname network renaming"
udevproperty UDEV_BIOSDEVNAME=
rm -f -- /etc/udev/rules.d/71-biosdevname.rules
else
info "biosdevname=1: activating biosdevname network renaming"
udevproperty UDEV_BIOSDEVNAME=1
fi
97biosdevname/module-setup.sh 0000755 00000000524 15272355673 0012222 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
[[ "$mount_needs" ]] && return 1
require_binaries biosdevname || return 1
return 0
}
depends() {
return 0
}
install() {
inst_multiple biosdevname
inst_rules 71-biosdevname.rules
}
40network/ifname-genrules.sh 0000755 00000002315 15272355673 0012041 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# if there are no ifname parameters, just use NAME=KERNEL
if ! getarg ifname= >/dev/null ; then
return
fi
command -v parse_ifname_opts >/dev/null || . /lib/net-lib.sh
{
for p in $(getargs ifname=); do
parse_ifname_opts $p
if [ -f /tmp/ifname-$ifname_mac ]; then
read oldif < /tmp/ifname-$ifname_mac
fi
if [ -f /tmp/ifname-$ifname_if ]; then
read oldmac < /tmp/ifname-$ifname_if
fi
if [ -n "$oldif" -a -n "$oldmac" -a "$oldif" = "$ifname_if" -a "$oldmac" = "$ifname_mac" ]; then
# skip same ifname= declaration
continue
fi
[ -n "$oldif" ] && warn "Multiple interface names specified for MAC $ifname_mac: $oldif"
[ -n "$oldmac" ] && warn "Multiple MAC specified for $ifname_if: $oldmac"
printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$ifname_mac" "$ifname_if"
echo $ifname_if > /tmp/ifname-$ifname_mac
echo $ifname_mac > /tmp/ifname-$ifname_if
done
} >> /etc/udev/rules.d/80-ifname.rules
40network/parse-vlan.sh 0000755 00000001024 15272355673 0011024 0 ustar 00 #!/bin/sh
#
# Format:
# vlan=<vlanname>:<phydevice>
#
parsevlan() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
unset vlanname phydevice
case $# in
2) vlanname=$1; phydevice=$2 ;;
*) die "vlan= requires two parameters" ;;
esac
}
for vlan in $(getargs vlan=); do
unset vlanname
unset phydevice
parsevlan "$vlan"
echo "$phydevice" > /tmp/vlan.${phydevice}.phy
echo "$vlanname" > /tmp/vlan.${vlanname}.${phydevice}
done
40network/parse-team.sh 0000755 00000001727 15272355673 0011024 0 ustar 00 #!/bin/sh
#
# Format:
# team=<teammaster>:<teamslaves>
#
# teamslaves is a comma-separated list of physical (ethernet) interfaces
#
parseteam() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
2) teammaster=$1; teamslaves=$(str_replace "$2" "," " ") ;;
*) die "team= requires two parameters" ;;
esac
}
for team in $(getargs team=); do
unset teammaster teamslaves
parseteam "$(getarg team=)"
echo "teammaster=$teammaster" > /tmp/team.${teammaster}.info
echo "teamslaves=\"$teamslaves\"" >> /tmp/team.${teammaster}.info
if ! [ -e /etc/teamd/${teammaster}.conf ]; then
warn "Team master $teammaster specified, but no /etc/teamd/$teammaster.conf present. Using activebackup."
mkdir -p /etc/teamd
printf -- "%s" '{"runner": {"name": "activebackup"}, "link_watch": {"name": "ethtool"}}' > "/etc/teamd/${teammaster}.conf"
fi
done
40network/netroot.sh 0000755 00000005345 15272355673 0010460 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v setup_net >/dev/null || . /lib/net-lib.sh
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# [ ! -z $2 ] means this is for manually bringing up network
# instead of real netroot; If It's called without $2, then there's
# no sense in doing something if no (net)root info is available
# or root is already there
[ -d $NEWROOT/proc ] && exit 0
if [ -z "$netroot" ]; then
netroot=$(getarg netroot=)
fi
[ -z "$netroot" ] && exit 1
# Set or override primary interface
netif=$1
[ -e "/tmp/net.bootdev" ] && read netif < /tmp/net.bootdev
case "$netif" in
??:??:??:??:??:??) # MAC address
for i in /sys/class/net/*/address; do
mac=$(cat $i)
if [ "$mac" = "$netif" ]; then
i=${i%/address}
netif=${i##*/}
break
fi
done
esac
# Figure out the handler for root=dhcp by recalling all netroot cmdline
# handlers when this is not called from manually network bringing up.
if [ -z "$2" ]; then
if getarg "root=dhcp" || getarg "netroot=dhcp" || getarg "root=dhcp6" || getarg "netroot=dhcp6"; then
# Load dhcp options
[ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
# If we have a specific bootdev with no dhcpoptions or empty root-path,
# we die. Otherwise we just warn
if [ -z "$new_root_path" ] ; then
[ -n "$BOOTDEV" ] && die "No dhcp root-path received for '$BOOTDEV'"
warn "No dhcp root-path received for '$BOOTDEV' trying other interfaces if available"
exit 1
fi
rm -f -- $hookdir/initqueue/finished/dhcp.sh
# Set netroot to new_root_path, so cmdline parsers don't call
netroot=$new_root_path
# FIXME!
unset rootok
for f in $hookdir/cmdline/90*.sh; do
[ -f "$f" ] && . "$f";
done
else
rootok="1"
fi
# Check: do we really know how to handle (net)root?
[ -z "$root" ] && die "No or empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
handler=${netroot%%:*}
handler=${handler%%4}
handler=$(command -v ${handler}root)
if [ -z "$netroot" ] || [ ! -e "$handler" ] ; then
die "No handler for netroot type '$netroot'"
fi
fi
# Source netroot hooks before we start the handler
source_hook netroot $netif
# Run the handler; don't store the root, it may change from device to device
# XXX other variables to export?
[ -n "$handler" ] && "$handler" "$netif" "$netroot" "$NEWROOT"
save_netinfo $netif
exit 0
40network/parse-ip-opts.sh 0000755 00000011460 15272355673 0011464 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Format:
# ip=[dhcp|on|any]
#
# ip=<interface>:[dhcp|on|any][:[<mtu>][:<macaddr>]]
#
# ip=<client-IP-number>:<server-IP-number>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:{dhcp|on|any|none|off}[:[<mtu>][:<macaddr>]]
#
# When supplying more than only ip= line, <interface> is mandatory and
# bootdev= must contain the name of the primary interface to use for
# routing,dns,dhcp-options,etc.
#
command -v getarg >/dev/null || . /lib/dracut-lib.sh
if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then
# No ip= argument(s) for netroot provided, defaulting to DHCP
return;
fi
# Count ip= lines to decide whether we need bootdev= or not
if [ -z "$NEEDBOOTDEV" ] ; then
count=0
for p in $(getargs ip=); do
case "$p" in
ibft)
continue;;
esac
count=$(( $count + 1 ))
done
[ $count -gt 1 ] && NEEDBOOTDEV=1
fi
unset count
# If needed, check if bootdev= contains anything usable
BOOTDEV=$(getarg bootdev=)
if [ -n "$NEEDBOOTDEV" ] && ! getargbool 0 rd.neednet; then
#[ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
echo "rd.neednet=1" > /etc/cmdline.d/dracut-neednet.conf
info "Multiple ip= arguments: assuming rd.neednet=1"
else
unset NEEDBOOTDEV
fi
# Check ip= lines
# XXX Would be nice if we could errorcheck ip addresses here as well
for p in $(getargs ip=); do
ip_to_var $p
# make first device specified the BOOTDEV
if [ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEV" ] && [ -n "$dev" ]; then
BOOTDEV="$dev"
info "Setting bootdev to '$BOOTDEV'"
fi
# skip ibft since we did it above
[ "$autoconf" = "ibft" ] && continue
# Empty autoconf defaults to 'dhcp'
if [ -z "$autoconf" ] ; then
warn "Empty autoconf values default to dhcp"
autoconf="dhcp"
fi
# Error checking for autoconf in combination with other values
for autoopt in $(str_replace "$autoconf" "," " "); do
case $autoopt in
error) die "Error parsing option 'ip=$p'";;
bootp|rarp|both) die "Sorry, ip=$autoopt is currenty unsupported";;
none|off)
[ -z "$ip" ] && \
die "For argument 'ip=$p'\nValue '$autoopt' without static configuration does not make sense"
[ -z "$mask" ] && \
die "Sorry, automatic calculation of netmask is not yet supported"
;;
auto6);;
either6);;
dhcp|dhcp6|on|any) \
#[ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
# die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
[ -n "$ip" ] && \
die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoopt'"
;;
*) die "For argument 'ip=$p'\nSorry, unknown value '$autoopt'";;
esac
done
if [ -n "$dev" ] ; then
# We don't like duplicate device configs
if [ -n "$IFACES" ] ; then
for i in $IFACES ; do
[ "$dev" = "$i" ] && die "For argument 'ip=$p'\nDuplication configurations for '$dev'"
done
fi
# IFACES list for later use
IFACES="$IFACES $dev"
fi
# Do we need to check for specific options?
if [ -n "$NEEDDHCP" ] || [ -n "$DHCPORSERVER" ] ; then
# Correct device? (Empty is ok as well)
[ "$dev" = "$BOOTDEV" ] || continue
# Server-ip is there?
[ -n "$DHCPORSERVER" ] && [ -n "$srv" ] && continue
# dhcp? (It's simpler to check for a set ip. Checks above ensure that if
# ip is there, we're static
[ -z "$ip" ] && continue
# Not good!
die "Server-ip or dhcp for netboot needed, but current arguments say otherwise"
fi
if str_starts "$dev" "enx" && [ ${#dev} -eq 15 ]; then
printf -- "ifname=%s:%s:%s:%s:%s:%s:%s\n" \
"$dev" \
"${dev:3:2}" \
"${dev:5:2}" \
"${dev:7:2}" \
"${dev:9:2}" \
"${dev:11:2}" \
"${dev:13:2}" >> /etc/cmdline.d/80-enx.conf
fi
done
# put BOOTIF in IFACES to make sure it comes up
if getargbool 1 "rd.bootif" && BOOTIF="$(getarg BOOTIF=)"; then
BOOTDEV=$(fix_bootif $BOOTIF)
IFACES="$BOOTDEV $IFACES"
fi
# This ensures that BOOTDEV is always first in IFACES
if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then
IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}"
IFACES="$BOOTDEV $IFACES"
fi
# Store BOOTDEV and IFACES for later use
[ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev
[ -n "$IFACES" ] && echo $IFACES > /tmp/net.ifaces
40network/parse-ifname.sh 0000755 00000001226 15272355673 0011327 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Format:
# ifname=<interface>:<mac>
#
# Note letters in the macaddress must be lowercase!
#
# Examples:
# ifname=eth0:4a:3f:4c:04:f8:d7
#
# Note when using ifname= to get persistent interface names, you must specify
# an ifname= argument for each interface used in an ip= or fcoe= argument
# check if there are any ifname parameters
if ! getarg ifname= >/dev/null ; then
return
fi
command -v parse_ifname_opts >/dev/null || . /lib/net-lib.sh
# Check ifname= lines
for p in $(getargs ifname=); do
parse_ifname_opts $p
done
40network/parse-bridge.sh 0000755 00000002144 15272355673 0011324 0 ustar 00 #!/bin/sh
#
# Format:
# bridge=<bridgename>:<bridgeslaves>
#
# <bridgeslaves> is a comma-separated list of physical (ethernet) interfaces
# bridge without parameters assumes bridge=br0:eth0
#
parsebridge() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
0) bridgename=br0; bridgeslaves=$iface ;;
1) die "bridge= requires two parameters" ;;
2) bridgename=$1; bridgeslaves=$(str_replace "$2" "," " ") ;;
*) die "bridge= requires two parameters" ;;
esac
}
# Parse bridge for bridgename and bridgeslaves
for bridge in $(getargs bridge=); do
unset bridgename
unset bridgeslaves
iface=eth0
# Read bridge= parameters if they exist
if [ "$bridge" != "bridge" ]; then
parsebridge $bridge
fi
# Simple default bridge
if [ -z "$bridgename" ]; then
bridgename=br0
bridgeslaves=$iface
fi
echo "bridgename=$bridgename" > /tmp/bridge.${bridgename}.info
echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.${bridgename}.info
done
40network/module-setup.sh 0000755 00000011336 15272355673 0011406 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _program
require_binaries ip arping dhclient || return 1
return 255
}
depends() {
return 0
}
installkernel() {
# Include wired net drivers, excluding wireless
net_module_filter() {
local _net_drivers='eth_type_trans|register_virtio_device|usbnet_open'
local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
local _ret
# subfunctions inherit following FDs
local _merge=8 _side2=9
function nmf1() {
local _fname _fcont
while read _fname; do
[[ $_fname =~ $_unwanted_drivers ]] && continue
case "$_fname" in
*.ko) _fcont="$(< $_fname)" ;;
*.ko.gz) _fcont="$(gzip -dc $_fname)" ;;
*.ko.xz) _fcont="$(xz -dc $_fname)" ;;
esac
[[ $_fcont =~ $_net_drivers
&& ! $_fcont =~ iw_handler_get_spy ]] \
&& echo "$_fname"
done
return 0
}
function rotor() {
local _f1 _f2
while read _f1; do
echo "$_f1"
if read _f2; then
echo "$_f2" 1>&${_side2}
fi
done | nmf1 1>&${_merge}
return 0
}
# Use two parallel streams to filter alternating modules.
set +x
eval "( ( rotor ) ${_side2}>&1 | nmf1 ) ${_merge}>&1"
[[ $debug ]] && set -x
return 0
}
{ find_kernel_modules_by_path drivers/net; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/net; fi; } \
| net_module_filter | instmods
#instmods() will take care of hostonly
instmods \
=drivers/net/phy \
=drivers/net/team \
=drivers/net/ethernet \
ecb arc4 bridge stp llc ipv6 bonding 8021q af_packet virtio_net
hostonly="" instmods iscsi_ibft crc32c iscsi_boot_sysfs
}
install() {
local _arch _i _dir
inst_multiple ip arping dhclient sed awk
inst_multiple -o ping ping6
inst_multiple -o teamd teamdctl teamnl
inst_simple /etc/libnl/classid
inst_script "$moddir/ifup.sh" "/sbin/ifup"
inst_script "$moddir/netroot.sh" "/sbin/netroot"
inst_script "$moddir/dhclient-script.sh" "/sbin/dhclient-script"
inst_simple "$moddir/net-lib.sh" "/lib/net-lib.sh"
inst_simple "$moddir/dhclient.conf" "/etc/dhclient.conf"
inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
inst_hook pre-udev 60 "$moddir/net-genrules.sh"
inst_hook cmdline 91 "$moddir/dhcp-root.sh"
inst_hook cmdline 92 "$moddir/parse-ibft.sh"
inst_hook cmdline 95 "$moddir/parse-vlan.sh"
inst_hook cmdline 96 "$moddir/parse-bond.sh"
inst_hook cmdline 96 "$moddir/parse-team.sh"
inst_hook cmdline 97 "$moddir/parse-bridge.sh"
inst_hook cmdline 98 "$moddir/parse-ip-opts.sh"
inst_hook cmdline 99 "$moddir/parse-ifname.sh"
inst_hook cleanup 10 "$moddir/kill-dhclient.sh"
# Special network nameing for idrac USB devs
inst_rules 73-idrac.rules
# install all config files for teaming
unset TEAM_MASTER
unset TEAM_CONFIG
unset TEAM_PORT_CONFIG
unset HWADDR
unset SUBCHANNELS
for i in /etc/sysconfig/network-scripts/ifcfg-*; do
[ -e "$i" ] || continue
case "$i" in
*~ | *.bak | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
continue
;;
esac
(
. "$i"
if ! [ "${ONBOOT}" = "no" -o "${ONBOOT}" = "NO" ] \
&& [ -n "${TEAM_MASTER}${TEAM_CONFIG}${TEAM_PORT_CONFIG}" ]; then
if [ -n "$TEAM_CONFIG" ] && [ -n "$DEVICE" ]; then
mkdir -p $initdir/etc/teamd
printf -- "%s" "$TEAM_CONFIG" > "$initdir/etc/teamd/${DEVICE}.conf"
elif [ -n "$TEAM_PORT_CONFIG" ]; then
inst_simple "$i"
HWADDR="$(echo $HWADDR | sed 'y/ABCDEF/abcdef/')"
if [ -n "$HWADDR" ]; then
ln_r "$i" "/etc/sysconfig/network-scripts/mac-${HWADDR}.conf"
fi
SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
if [ -n "$SUBCHANNELS" ]; then
ln_r "$i" "/etc/sysconfig/network-scripts/ccw-${SUBCHANNELS}.conf"
fi
fi
fi
)
done
_arch=$(uname -m)
inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
{"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*"
dracut_need_initqueue
}
40network/parse-ibft.sh 0000755 00000000611 15272355673 0011011 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
if getargbool 0 rd.iscsi.ibft -d "ip=ibft"; then
modprobe -b -q iscsi_boot_sysfs 2>/dev/null
modprobe -b -q iscsi_ibft
ibft_to_cmdline
fi
40network/net-lib.sh 0000755 00000060202 15272355673 0010311 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
is_ip() {
echo "$1" | {
IFS=. read a b c d
test "$a" -ge 0 -a "$a" -le 255 \
-a "$b" -ge 0 -a "$b" -le 255 \
-a "$c" -ge 0 -a "$c" -le 255 \
-a "$d" -ge 0 -a "$d" -le 255 \
2> /dev/null
} && return 0
return 1
}
get_ip() {
local iface="$1" ip=""
ip=$(ip -o -f inet addr show $iface)
ip=${ip%%/*}
ip=${ip##* }
}
iface_for_remote_addr() {
set -- $(ip -o route get to $1)
echo $5
}
iface_for_ip() {
set -- $(ip -o addr show to $1)
echo $2
}
iface_for_mac() {
local interface="" mac="$(echo $1 | sed 'y/ABCDEF/abcdef/')"
for interface in /sys/class/net/*; do
if [ $(cat $interface/address) = "$mac" ]; then
echo ${interface##*/}
fi
done
}
# get the iface name for the given identifier - either a MAC, IP, or iface name
iface_name() {
case $1 in
??:??:??:??:??:??|??-??-??-??-??-??) iface_for_mac $1 ;;
*:*:*|*.*.*.*) iface_for_ip $1 ;;
*) echo $1 ;;
esac
}
# list the configured interfaces
configured_ifaces() {
local IFACES="" iface_id="" rv=1
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
if { pidof udevd || pidof systemd-udevd; } > /dev/null; then
for iface_id in $IFACES; do
echo $(iface_name $iface_id)
rv=0
done
else
warn "configured_ifaces called before udev is running"
echo $IFACES
[ -n "$IFACES" ] && rv=0
fi
return $rv
}
all_ifaces_up() {
local iface="" IFACES=""
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
for iface in $IFACES; do
[ -e /tmp/net.$iface.up ] || return 1
done
}
all_ifaces_setup() {
local iface="" IFACES=""
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
for iface in $IFACES; do
[ -e /tmp/net.$iface.did-setup ] || return 1
done
}
get_netroot_ip() {
local prefix="" server="" rest=""
splitsep "$1" ":" prefix server rest
case $server in
[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) echo "$server"; return 0 ;;
esac
return 1
}
ip_is_local() {
strstr "$(ip route get $1 2>/dev/null)" " via "
}
ifdown() {
local netif="$1"
# ip down/flush ensures that routing info goes away as well
ip link set $netif down
ip addr flush dev $netif
echo "#empty" > /etc/resolv.conf
rm -f -- /tmp/net.$netif.did-setup
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
# TODO: send "offline" uevent?
}
setup_net() {
local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
local _p
[ -e /tmp/net.$netif.did-setup ] && return
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
[ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
[ -z "$IFACES" ] && IFACES="$netif"
# run the scripts written by ifup
[ -e /tmp/net.$netif.hostname ] && . /tmp/net.$netif.hostname
[ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
[ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
# set up resolv.conf
[ -e /tmp/net.$netif.resolv.conf ] && \
awk '!array[$0]++' /tmp/net.$netif.resolv.conf > /etc/resolv.conf
[ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw
# add static route
for _p in $(getargs rd.route); do
route_to_var "$_p" || continue
[ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue
ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"}
if strstr "$route_mask" ":"; then
printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
> /tmp/net.route6."$netif"
else
printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
> /tmp/net.route."$netif"
fi
done
# Handle STP Timeout: arping the default gateway.
# (or the root server, if a) it's local or b) there's no gateway.)
# Note: This assumes that if no router is present the
# root server is on the same subnet.
# Get DHCP-provided router IP, or the cmdline-provided "gw=" argument
[ -n "$new_routers" ] && gw_ip=${new_routers%%,*}
[ -n "$gw" ] && gw_ip=$gw
# Get the "netroot" IP (if there's an IP address in there)
netroot_ip=$(get_netroot_ip $netroot)
# try netroot if it's local (or there's no gateway)
if ip_is_local $netroot_ip || [ -z "$gw_ip" ]; then
dest="$netroot_ip"
else
dest="$gw_ip"
fi
unset layer2
if [ -f /sys/class/net/$netif/device/layer2 ]; then
read layer2 < /sys/class/net/$netif/device/layer2
fi
if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then
arping -q -f -w 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
fi
unset layer2
> /tmp/net.$netif.did-setup
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
> /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
}
save_netinfo() {
local netif="$1" IFACES="" f="" i=""
[ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
# Add $netif to the front of IFACES (if it's not there already).
set -- "$netif"
for i in $IFACES; do [ "$i" != "$netif" ] && set -- "$@" "$i"; done
IFACES="$*"
for i in $IFACES; do
for f in /tmp/dhclient.$i.*; do
[ -f $f ] && cp -f $f /tmp/net.${f#/tmp/dhclient.}
done
done
echo $IFACES > /tmp/.net.ifaces.new
mv /tmp/.net.ifaces.new /tmp/net.ifaces
}
set_ifname() {
local name="$1" mac="$2" num=-1 n=""
# if it's already set, return the existing name
for n in $(getargs ifname=); do
strstr "$n" "$mac" && echo ${n%%:*} && return
done
# otherwise, pick a new name and use that
while :; do
num=$(($num+1));
[ -e /sys/class/net/$name$num ] && continue
for n in $(getargs ifname=); do
[ "$name$num" = "${n%%:*}" ] && continue 2
done
break
done
echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
echo "$name$num"
}
# pxelinux provides macaddr '-' separated, but we need ':'
fix_bootif() {
local macaddr=${1}
local IFS='-'
macaddr=$(printf '%s:' ${macaddr})
macaddr=${macaddr%:}
# strip hardware type field from pxelinux
[ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
# return macaddr with lowercase alpha characters expected by udev
echo $macaddr | sed 'y/ABCDEF/abcdef/'
}
ibft_to_cmdline() {
local iface=""
modprobe -q iscsi_ibft
(
for iface in /sys/firmware/ibft/ethernet*; do
local mac="" dev=""
local dhcp="" ip="" gw="" mask="" hostname=""
local dns1 dns2
[ -e ${iface}/mac ] || continue
mac=$(read a < ${iface}/mac; echo $a)
[ -z "$mac" ] && continue
dev=$(set_ifname ibft $mac)
[ -e /tmp/net.${dev}.has_ibft_config ] && continue
[ -e ${iface}/flags ] && flags=$(read a < ${iface}/flags; echo $a)
# Skip invalid interfaces
(( $flags & 1 )) || continue
[ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a)
[ -e ${iface}/origin ] && origin=$(read a < ${iface}/origin; echo $a)
[ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a)
if [ -n "$ip" ] ; then
case "$ip" in
*.*.*.*)
family=ipv4
;;
*:*)
family=ipv6
;;
esac
fi
if [ -n "$dhcp" ] || [ "$origin" -eq 3 ]; then
if [ "$family" = "ipv6" ] ; then
echo "ip=$dev:dhcp6"
else
echo "ip=$dev:dhcp"
fi
elif [ -e ${iface}/ip-addr ]; then
# skip not assigned ip adresses
[ "$ip" = "0.0.0.0" ] && continue
[ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
[ "$gateway" = "0.0.0.0" ] && unset $gateway
[ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
[ -e ${iface}/prefix-len ] && prefix=$(read a < ${iface}/prefix-len; echo $a)
[ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a)
[ "$dns1" = "0.0.0.0" ] && unset $dns1
[ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a)
[ "$dns2" = "0.0.0.0" ] && unset $dns2
[ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
if [ "$family" = "ipv6" ] ; then
if [ -n "$ip" ] ; then
ip="[$ip]"
[ -n "$prefix" ] || prefix=64
mask="$prefix"
fi
if [ -n "$gw" ] ; then
gw="[${gw}]"
fi
fi
if [ -n "$ip" ] && [ -n "$mask" ]; then
echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
else
warn "${iface} does not contain a valid iBFT configuration"
warn "ip-addr=$ip"
warn "gateway=$gw"
warn "subnet-mask=$mask"
warn "hostname=$hostname"
fi
else
info "${iface} does not contain a valid iBFT configuration"
ls -l ${iface} | vinfo
fi
if [ -e ${iface}/vlan ]; then
vlan=$(read a < ${iface}/vlan; echo $a)
if [ "$vlan" -ne "0" ]; then
case "$vlan" in
[0-9]*)
echo "vlan=$dev.$vlan:$dev"
echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config
;;
*)
echo "vlan=$vlan:$dev"
echo $mac > /tmp/net.${vlan}.has_ibft_config
;;
esac
else
echo $mac > /tmp/net.${dev}.has_ibft_config
fi
else
echo $mac > /tmp/net.${dev}.has_ibft_config
fi
done
) >> /etc/cmdline.d/40-ibft.conf
}
parse_iscsi_root()
{
local v
v=${1#iscsi:}
# extract authentication info
case "$v" in
*@*:*:*:*:*)
authinfo=${v%%@*}
v=${v#*@}
# allow empty authinfo to allow having an @ in iscsi_target_name like this:
# netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
if [ -n "$authinfo" ]; then
OLDIFS="$IFS"
IFS=:
set $authinfo
IFS="$OLDIFS"
if [ $# -gt 4 ]; then
warn "Wrong authentication info in iscsi: parameter!"
return 1
fi
iscsi_username=$1
iscsi_password=$2
if [ $# -gt 2 ]; then
iscsi_in_username=$3
iscsi_in_password=$4
fi
fi
;;
esac
# extract target ip
case "$v" in
[[]*[]]:*)
iscsi_target_ip=${v#[[]}
iscsi_target_ip=${iscsi_target_ip%%[]]*}
v=${v#[[]$iscsi_target_ip[]]:}
;;
*)
iscsi_target_ip=${v%%[:]*}
v=${v#$iscsi_target_ip:}
;;
esac
unset iscsi_target_name
# extract target name
case "$v" in
*:iqn.*)
iscsi_target_name=iqn.${v##*:iqn.}
v=${v%:iqn.*}:
;;
*:eui.*)
iscsi_target_name=eui.${v##*:eui.}
v=${v%:eui.*}:
;;
*:naa.*)
iscsi_target_name=naa.${v##*:naa.}
v=${v%:naa.*}:
;;
esac
# parse the rest
OLDIFS="$IFS"
IFS=:
set $v
IFS="$OLDIFS"
iscsi_protocol=$1; shift # ignored
iscsi_target_port=$1; shift
if [ -n "$iscsi_target_name" ]; then
if [ $# -eq 3 ]; then
iscsi_iface_name=$1; shift
fi
if [ $# -eq 2 ]; then
iscsi_netdev_name=$1; shift
fi
iscsi_lun=$1; shift
if [ $# -ne 0 ]; then
warn "Invalid parameter in iscsi: parameter!"
return 1
fi
return 0
fi
if [ $# -gt 3 ] && [ -n "$1$2" ]; then
if [ -z "$3" ] || [ "$3" -ge 0 ] 2>/dev/null ; then
iscsi_iface_name=$1; shift
iscsi_netdev_name=$1; shift
fi
fi
iscsi_lun=$1; shift
iscsi_target_name=$(printf "%s:" "$@")
iscsi_target_name=${iscsi_target_name%:}
}
ip_to_var() {
local v=${1}:
local i
set --
while [ -n "$v" ]; do
if [ "${v#\[*:*:*\]:}" != "$v" ]; then
# handle IPv6 address
i="${v%%\]:*}"
i="${i##\[}"
set -- "$@" "$i"
v=${v#\[$i\]:}
else
set -- "$@" "${v%%:*}"
v=${v#*:}
fi
done
unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2
if [ $# -eq 0 ]; then
autoconf="error"
return 0
fi
if [ $# -eq 1 ]; then
# format: ip={dhcp|on|any|dhcp6|auto6|either6}
# or
# ip=<ipv4-address> means anaconda-style static config argument cluster
autoconf="$1"
if strstr "$autoconf" "*.*.*.*"; then
# ip=<ipv4-address> means anaconda-style static config argument cluster:
# ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu>
# ksdevice={link|bootif|ibft|<MAC>|<ifname>}
ip="$autoconf"
gw=$(getarg gateway=)
mask=$(getarg netmask=)
hostname=$(getarg hostname=)
dev=$(getarg ksdevice=)
autoconf="none"
mtu=$(getarg mtu=)
# handle special values for ksdevice
case "$dev" in
bootif|BOOTIF) dev=$(fix_bootif $(getarg BOOTIF=)) ;;
link) dev="" ;; # FIXME: do something useful with this
ibft) dev="" ;; # ignore - ibft is handled elsewhere
esac
fi
return 0
fi
if [ "$2" = "dhcp" -o "$2" = "on" -o "$2" = "any" -o "$2" = "dhcp6" -o "$2" = "auto6" -o "$2" = "either6" ]; then
# format: ip=<interface>:{dhcp|on|any|dhcp6|auto6}[:[<mtu>][:<macaddr>]]
[ -n "$1" ] && dev="$1"
[ -n "$2" ] && autoconf="$2"
[ -n "$3" ] && mtu=$3
if [ -z "$5" ]; then
macaddr="$4"
else
macaddr="${4}:${5}:${6}:${7}:${8}:${9}"
fi
return 0
fi
# format: ip=<client-IP>:[<peer>]:<gateway-IP>:<netmask>:<client_hostname>:<interface>:{none|off|dhcp|on|any|dhcp6|auto6|ibft}:[:[<mtu>][:<macaddr>]]
[ -n "$1" ] && ip=$1
[ -n "$2" ] && srv=$2
[ -n "$3" ] && gw=$3
[ -n "$4" ] && mask=$4
[ -n "$5" ] && hostname=$5
[ -n "$6" ] && dev=$6
[ -n "$7" ] && autoconf=$7
case "$8" in
[0-9]*:*|[0-9]*.[0-9]*.[0-9]*.[0-9]*)
dns1="$8"
[ -n "$9" ] && dns2="$9"
;;
[0-9]*)
mtu="$8"
if [ -n "${9}" -a -z "${10}" ]; then
macaddr="${9}"
elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
fi
;;
*)
if [ -n "${9}" -a -z "${10}" ]; then
macaddr="${9}"
elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
fi
;;
esac
return 0
}
route_to_var() {
local v=${1}:
local i
set --
while [ -n "$v" ]; do
if [ "${v#\[*:*:*\]:}" != "$v" ]; then
# handle IPv6 address
i="${v%%\]:*}"
i="${i##\[}"
set -- "$@" "$i"
v=${v#\[$i\]:}
else
set -- "$@" "${v%%:*}"
v=${v#*:}
fi
done
unset route_mask route_gw route_dev
case $# in
2) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"
return 0;;
3) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3"
return 0;;
*) return 1;;
esac
}
parse_ifname_opts() {
local IFS=:
set $1
case $# in
7)
ifname_if=$1
# udev requires MAC addresses to be lower case
ifname_mac=$(echo $2:$3:$4:$5:$6:$7 | sed 'y/ABCDEF/abcdef/')
;;
21)
# infiniband MAC addrs are 20 bytes long not 6
ifname_if=$1
ifname_mac=$(echo $2:$3:$4:$5:$6:$7:$8:$9:$10:$11:$12:13:$14:$15$16:$17:$18:$19:$20:$21 | sed 'y/ABCDEF/abcdef/')
;;
*)
die "Invalid arguments for ifname=$1"
;;
esac
case $ifname_if in
eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]|eth[0-9][0-9][0-9][0-9])
warn "ifname=$ifname_if uses the kernel name space for interfaces"
warn "This can fail for multiple network interfaces and is discouraged!"
warn "Please use a custom name like \"netboot\" or \"bluesocket\""
warn "or use the persistent interface names from udev or biosdevname and no ifname= at all."
;;
esac
}
# some network driver need long time to initialize, wait before it's ready.
wait_for_if_link() {
local cnt=0
local li
local timeout="$(getargs rd.net.timeout.iflink=)"
timeout=${timeout:-60}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip -o link show dev $1 2>/dev/null)
[ -n "$li" ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_if_up() {
local cnt=0
local li
local timeout="$(getargs rd.net.timeout.ifup=)"
timeout=${timeout:-20}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip -o link show up dev $1)
if [ -n "$li" ]; then
case "$li" in
*\<UP*)
return 0;;
*\<*,UP\>*)
return 0;;
*\<*,UP,*\>*)
return 0;;
esac
fi
if strstr "$li" "LOWER_UP" \
&& strstr "$li" "state UNKNOWN" \
&& ! strstr "$li" "DORMANT"; then
return 0
fi
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_route_ok() {
local cnt=0
local timeout="$(getargs rd.net.timeout.route=)"
timeout=${timeout:-20}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip route show)
[ -n "$li" ] && [ -z "${li##*$1*}" ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_dad_link() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6dad=)"
timeout=${timeout:-50}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -n "$(ip -6 addr show dev "$1" scope link)" ] \
&& [ -z "$(ip -6 addr show dev "$1" scope link tentative)" ] \
&& return 0
[ -n "$(ip -6 addr show dev "$1" scope link dadfailed)" ] \
&& return 1
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_dad() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6dad=)"
timeout=${timeout:-50}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -n "$(ip -6 addr show dev "$1")" ] \
&& [ -z "$(ip -6 addr show dev "$1" tentative)" ] \
&& return 0
[ -n "$(ip -6 addr show dev "$1" dadfailed)" ] \
&& return 1
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_auto() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6auto=)"
timeout=${timeout:-40}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -z "$(ip -6 addr show dev "$1" tentative)" ] \
&& [ -n "$(ip -6 route list proto ra dev "$1")" ] \
&& return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
linkup() {
wait_for_if_link $1 2>/dev/null\
&& ip link set $1 up 2>/dev/null\
&& wait_for_if_up $1 2>/dev/null
}
type hostname >/dev/null 2>&1 || \
hostname() {
cat /proc/sys/kernel/hostname
}
iface_has_carrier() {
local cnt=0
local interface="$1" flags=""
[ -n "$interface" ] || return 2
interface="/sys/class/net/$interface"
[ -d "$interface" ] || return 2
local timeout="$(getargs rd.net.timeout.carrier=)"
timeout=${timeout:-15}
timeout=$(($timeout*10))
linkup "$1"
li=$(ip -o link show up dev $1)
strstr "$li" "NO-CARRIER" && _no_carrier_flag=1
while [ $cnt -lt $timeout ]; do
if [ -n "$_no_carrier_flag" ]; then
# NO-CARRIER flag was cleared
strstr "$li" "NO-CARRIER" || return 0
fi
# double check the syscfs carrier flag
[ -e "$interface/carrier" ] && [ "$(cat $interface/carrier)" = 1 ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
iface_has_link() {
iface_has_carrier "$@"
}
iface_is_enslaved() {
local _li
_li=$(ip -o link show dev $1)
strstr "$li" " master " || return 1
return 0
}
find_iface_with_link() {
local iface_path="" iface=""
for iface_path in /sys/class/net/*; do
iface=${iface_path##*/}
str_starts "$iface" "lo" && continue
if iface_has_link $iface; then
echo "$iface"
return 0
fi
done
return 1
}
is_persistent_ethernet_name() {
local _netif="$1"
local _name_assign_type="0"
[ -f "/sys/class/net/$_netif/name_assign_type" ] \
&& _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
# NET_NAME_ENUM 1
[ "$_name_assign_type" = "1" ] && return 1
# NET_NAME_PREDICTABLE 2
[ "$_name_assign_type" = "2" ] && return 0
case "$_netif" in
# udev persistent interface names
eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*)
;;
ens[0-9]|ens[0-9][0-9]|ens[0-9][0-9][0-9]*)
;;
enp[0-9]s[0-9]*|enp[0-9][0-9]s[0-9]*|enp[0-9][0-9][0-9]*s[0-9]*)
;;
enP*p[0-9]s[0-9]*|enP*p[0-9][0-9]s[0-9]*|enP*p[0-9][0-9][0-9]*s[0-9]*)
;;
# biosdevname
em[0-9]|em[0-9][0-9]|em[0-9][0-9][0-9]*)
;;
p[0-9]p[0-9]*|p[0-9][0-9]p[0-9]*|p[0-9][0-9][0-9]*p[0-9]*)
;;
*)
return 1
esac
return 0
}
is_kernel_ethernet_name() {
local _netif="$1"
local _name_assign_type="1"
if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then
_name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
case "$_name_assign_type" in
2|3|4)
# NET_NAME_PREDICTABLE 2
# NET_NAME_USER 3
# NET_NAME_RENAMED 4
return 1
;;
1|*)
# NET_NAME_ENUM 1
return 0
;;
esac
fi
# fallback to error prone manual name check
case "$_netif" in
eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*)
return 0
;;
*)
return 1
esac
}
iface_get_subchannels() {
local _netif
local _subchannels
_netif="$1"
_subchannels=$({
for i in /sys/class/net/$_netif/device/cdev[0-9]*; do
[ -e $i ] || continue
channel=$(readlink -f $i)
printf -- "%s" "${channel##*/},"
done
})
[ -n "$_subchannels" ] || return 1
printf -- "%s" ${_subchannels%,}
}
40network/ifup.sh 0000755 00000033454 15272355673 0007733 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# We don't need to check for ip= errors here, that is handled by the
# cmdline parser script
#
# without $2 means this is for real netroot case
# or it is for manually bring up network ie. for kdump scp vmcore
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# Huh? No $1?
[ -z "$1" ] && exit 1
# $netif reads easier than $1
netif=$1
# loopback is always handled the same way
if [ "$netif" = "lo" ] ; then
ip link set lo up
ip addr add 127.0.0.1/8 dev lo
exit 0
fi
# Run dhclient
do_dhcp() {
# dhclient-script will mark the netif up and generate the online
# event for nfsroot
# XXX add -V vendor class and option parsing per kernel
local _COUNT=0
local _timeout=$(getargs rd.net.timeout.dhcp=)
local _DHCPRETRY=$(getargs rd.net.dhcp.retry=)
_DHCPRETRY=${_DHCPRETRY:-1}
[ -e /tmp/dhclient.$netif.pid ] && return 0
if ! iface_has_carrier $netif; then
warn "No carrier detected on interface $netif"
return 1
fi
[ -n "$macaddr" ] && ip link set address $macaddr dev $netif
[ -n "$mtu" ] && ip link set mtu $mtu dev $netif
ip -4 addr flush dev $netif
while [ $_COUNT -lt $_DHCPRETRY ]; do
info "Starting dhcp for interface $netif"
dhclient "$@" \
${_timeout:+-timeout $_timeout} \
-q \
-cf /etc/dhclient.conf \
-pf /tmp/dhclient.$netif.pid \
-lf /tmp/dhclient.$netif.lease \
$netif \
&& return 0
_COUNT=$(($_COUNT+1))
[ $_COUNT -lt $_DHCPRETRY ] && sleep 1
done
warn "dhcp for interface $netif failed"
return 1
}
load_ipv6() {
[ -d /proc/sys/net/ipv6 ] && return
modprobe ipv6
i=0
while [ ! -d /proc/sys/net/ipv6 ]; do
i=$(($i+1))
[ $i -gt 10 ] && break
sleep 0.1
done
}
do_ipv6auto() {
local ret
load_ipv6
echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
linkup $netif
[ -n "$macaddr" ] && ip link set address $macaddr dev $netif
[ -n "$mtu" ] && ip link set mtu $mtu dev $netif
wait_for_ipv6_auto $netif
ret=$?
if [ -n "$hostname" ]; then
safe_hostname=$(printf '%s' "${hostname}")
printf 'echo %q > /proc/sys/kernel/hostname\n' "$safe_hostname" > /tmp/net."$netif".hostname
fi
return $ret
}
# Handle static ip configuration
do_static() {
strstr $ip '*:*:*' && load_ipv6
if [ -z "$dev" ] && ! iface_has_carrier "$netif"; then
warn "No carrier detected on interface $netif"
return 1
elif ! linkup "$netif"; then
warn "Could not bring interface $netif up!"
return 1
fi
ip route get "$ip" | {
read a rest
if [ "$a" = "local" ]; then
warn "Not assigning $ip to interface $netif, cause it is already assigned!"
return 1
fi
return 0
} || return 1
[ -n "$macaddr" ] && ip link set address $macaddr dev $netif
[ -n "$mtu" ] && ip link set mtu $mtu dev $netif
if strstr $ip '*:*:*'; then
# note no ip addr flush for ipv6
ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
wait_for_ipv6_dad $netif
else
if [ -z "$srv" ]; then
if ! arping -f -q -D -c 2 -I $netif $ip; then
warn "Duplicate address detected for $ip for interface $netif."
return 1
fi
fi
ip -4 addr flush dev $netif
ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
fi
[ -n "$gw" ] && printf 'ip route replace default via %q dev %q\n' "$gw" "$netif" > "/tmp/net.${netif}.gw"
if [ -n "$hostname" ]; then
safe_hostname=$(printf '%s' "${hostname}")
printf 'echo %q > /proc/sys/kernel/hostname\n' "$safe_hostname" > /tmp/net."$netif".hostname
fi
return 0
}
get_vid() {
case "$1" in
vlan*)
echo ${1#vlan}
;;
*.*)
echo ${1##*.}
;;
esac
}
# check, if we need VLAN's for this interface
if [ -z "$DO_VLAN_PHY" ] && [ -e /tmp/vlan.${netif}.phy ]; then
unset DO_VLAN
NO_AUTO_DHCP=yes DO_VLAN_PHY=yes ifup "$netif"
modprobe -b -q 8021q
for i in /tmp/vlan.*.${netif}; do
[ -e "$i" ] || continue
read vlanname < "$i"
if [ -n "$vlanname" ]; then
linkup "$netif"
ip link add dev "$vlanname" link "$netif" type vlan id "$(get_vid $vlanname)"
ifup "$vlanname"
fi
done
exit 0
fi
# Check, if interface is VLAN interface
if ! [ -e /tmp/vlan.${netif}.phy ]; then
for i in /tmp/vlan.${netif}.*; do
[ -e "$i" ] || continue
export DO_VLAN=yes
break
done
fi
# bridge this interface?
if [ -z "$NO_BRIDGE_MASTER" ]; then
for i in /tmp/bridge.*.info; do
[ -e "$i" ] || continue
unset bridgeslaves
unset bridgename
. "$i"
for ethname in $bridgeslaves ; do
[ "$netif" != "$ethname" ] && continue
NO_BRIDGE_MASTER=yes NO_AUTO_DHCP=yes ifup $ethname
linkup $ethname
if [ ! -e /tmp/bridge.$bridgename.up ]; then
ip link add name $bridgename type bridge
echo 0 > /sys/devices/virtual/net/$bridgename/bridge/forward_delay
> /tmp/bridge.$bridgename.up
fi
ip link set dev $ethname master $bridgename
ifup $bridgename
exit 0
done
done
fi
# enslave this interface to bond?
if [ -z "$NO_BOND_MASTER" ]; then
for i in /tmp/bond.*.info; do
[ -e "$i" ] || continue
unset bondslaves
unset bondname
. "$i"
for slave in $bondslaves ; do
[ "$netif" != "$slave" ] && continue
# already setup
[ -e /tmp/bond.$bondname.up ] && exit 0
# wait for all slaves to show up
for slave in $bondslaves ; do
# try to create the slave (maybe vlan or bridge)
NO_BOND_MASTER=yes NO_AUTO_DHCP=yes ifup $slave
if ! ip link show dev $slave >/dev/null 2>&1; then
# wait for the last slave to show up
exit 0
fi
done
modprobe -q -b bonding
echo "+$bondname" > /sys/class/net/bonding_masters 2>/dev/null
ip link set $bondname down
# Stolen from ifup-eth
# add the bits to setup driver parameters here
for arg in $bondoptions ; do
key=${arg%%=*};
value=${arg##*=};
# %{value:0:1} is replaced with non-bash specific construct
if [ "${key}" = "arp_ip_target" -a "${#value}" != "0" -a "+${value%%+*}" != "+" ]; then
OLDIFS=$IFS;
IFS=',';
for arp_ip in $value; do
echo +$arp_ip > /sys/class/net/${bondname}/bonding/$key
done
IFS=$OLDIFS;
else
echo $value > /sys/class/net/${bondname}/bonding/$key
fi
done
linkup $bondname
for slave in $bondslaves ; do
cat /sys/class/net/$slave/address > /tmp/net.${bondname}.${slave}.hwaddr
ip link set $slave down
echo "+$slave" > /sys/class/net/$bondname/bonding/slaves
linkup $slave
done
# Set mtu on bond master
[ -n "$bondmtu" ] && ip link set mtu $bondmtu dev $bondname
# add the bits to setup the needed post enslavement parameters
for arg in $bondoptions ; do
key=${arg%%=*};
value=${arg##*=};
if [ "${key}" = "primary" ]; then
echo $value > /sys/class/net/${bondname}/bonding/$key
fi
done
> /tmp/bond.$bondname.up
NO_BOND_MASTER=yes ifup $bondname
exit $?
done
done
fi
if [ -z "$NO_TEAM_MASTER" ]; then
for i in /tmp/team.*.info; do
[ -e "$i" ] || continue
unset teammaster
unset teamslaves
. "$i"
for slave in $teamslaves ; do
[ "$netif" != "$slave" ] && continue
[ -e /tmp/team.$teammaster.up ] && exit 0
# wait for all slaves to show up
for slave in $teamslaves ; do
# try to create the slave (maybe vlan or bridge)
NO_TEAM_MASTER=yes NO_AUTO_DHCP=yes ifup $slave
if ! ip link show dev $slave >/dev/null 2>&1; then
# wait for the last slave to show up
exit 0
fi
done
if [ ! -e /tmp/team.$teammaster.up ] ; then
# We shall only bring up those _can_ come up
# in case of some slave is gone in active-backup mode
working_slaves=""
for slave in $teamslaves ; do
ip link set $slave up 2>/dev/null
if wait_for_if_up $slave; then
working_slaves="$working_slaves$slave "
fi
done
# Do not add slaves now
teamd -d -U -n -N -t $teammaster -f /etc/teamd/$teammaster.conf
for slave in $working_slaves; do
# team requires the slaves to be down before joining team
ip link set $slave down
teamdctl $teammaster port add $slave
done
ip link set $teammaster up
> /tmp/team.$teammaster.up
NO_TEAM_MASTER=yes ifup $teammaster
exit $?
fi
done
done
fi
# all synthetic interfaces done.. now check if the interface is available
if ! ip link show dev $netif >/dev/null 2>&1; then
exit 1
fi
# disable manual ifup while netroot is set for simplifying our logic
# in netroot case we prefer netroot to bringup $netif automaticlly
[ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
if [ -n "$manualup" ]; then
>/tmp/net.$netif.manualup
rm -f /tmp/net.${netif}.did-setup
else
[ -e /tmp/net.${netif}.did-setup ] && exit 0
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
[ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0
fi
# No ip lines default to dhcp
ip=$(getarg ip)
if [ -z "$NO_AUTO_DHCP" ] && [ -z "$ip" ]; then
if [ "$netroot" = "dhcp6" ]; then
do_dhcp -6
else
do_dhcp -4
fi
for s in $(getargs nameserver); do
[ -n "$s" ] || continue
echo nameserver $s >> /tmp/net.$netif.resolv.conf
done
fi
# Specific configuration, spin through the kernel command line
# looking for ip= lines
for p in $(getargs ip=); do
ip_to_var $p
# skip ibft
[ "$autoconf" = "ibft" ] && continue
case "$dev" in
??:??:??:??:??:??) # MAC address
_dev=$(iface_for_mac $dev)
[ -n "$_dev" ] && dev="$_dev"
;;
??-??-??-??-??-??) # MAC address in BOOTIF form
_dev=$(iface_for_mac $(fix_bootif $dev))
[ -n "$_dev" ] && dev="$_dev"
;;
esac
# If this option isn't directed at our interface, skip it
if [ -n "$dev" ]; then
[ "$dev" != "$netif" ] && \
[ "$use_bridge" != 'true' ] && \
[ "$use_vlan" != 'true' ] && continue
else
iface_is_enslaved "$netif" && continue
fi
# Store config for later use
for i in ip srv gw mask hostname macaddr mtu dns1 dns2; do
eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
done > /tmp/net.$netif.override
for autoopt in $(str_replace "$autoconf" "," " "); do
case $autoopt in
dhcp|on|any)
do_dhcp -4 ;;
dhcp6)
load_ipv6
do_dhcp -6 ;;
auto6)
do_ipv6auto ;;
either6)
do_ipv6auto || do_dhcp -6 ;;
*)
do_static ;;
esac
done
ret=$?
# setup nameserver
for s in "$dns1" "$dns2" $(getargs nameserver); do
[ -n "$s" ] || continue
echo nameserver $s >> /tmp/net.$netif.resolv.conf
done
if [ $ret -eq 0 ]; then
> /tmp/net.${netif}.up
if [ -z "$DO_VLAN" ] && [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
case $autoconf in
dhcp|on|any|dhcp6)
;;
*)
if [ $ret -eq 0 ]; then
setup_net $netif
source_hook initqueue/online $netif
if [ -z "$manualup" ]; then
/sbin/netroot $netif
fi
fi
;;
esac
exit $ret
fi
done
# netif isn't the top stack? Then we should exit here.
# eg. netif is bond0. br0 is on top of it. dhcp br0 is correct but dhcp
# bond0 doesn't make sense.
if [ -n "$DO_BOND_SETUP" -o -n "$DO_TEAM_SETUP" -o -n "$DO_VLAN_SETUP" ]; then
exit 0
fi
# no ip option directed at our interface?
if [ -z "$NO_AUTO_DHCP" ] && [ ! -e /tmp/net.${netif}.up ]; then
if [ -e /tmp/net.bootdev ]; then
BOOTDEV=$(cat /tmp/net.bootdev)
if [ "$netif" = "$BOOTDEV" ] || [ "$BOOTDEV" = "$(cat /sys/class/net/${netif}/address)" ]; then
load_ipv6
do_dhcp
fi
else
if getargs 'ip=dhcp6'; then
load_ipv6
do_dhcp -6
fi
if getargs 'ip=dhcp'; then
do_dhcp -4
fi
fi
fi
exit 0
40network/dhcp-root.sh 0000755 00000001636 15272355673 0010664 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "$netroot" = "dhcp" ] && break
[ "$netroot" = "dhcp6" ] && break
done
[ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] || unset netroot
fi
if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ]; then
# Tell ip= checker that we need dhcp
NEEDDHCP="1"
# Done, all good!
rootok=1
if [ "$netroot" != "dhcp" ] && [ "$netroot" != "dhcp6" ]; then
netroot=$root
fi
# Shut up init error check
[ -z "$root" ] && root="dhcp"
echo '[ -d $NEWROOT/proc -o -e /dev/root ]' > $hookdir/initqueue/finished/dhcp.sh
fi
40network/net-genrules.sh 0000755 00000007254 15272355673 0011377 0 ustar 00 #!/bin/sh
getargbool 0 rd.neednet && NEEDNET=1
# Don't continue if we don't need network
if [ -z "$netroot" ] && [ ! -e "/tmp/net.ifaces" ] && [ "$NEEDNET" != "1" ]; then
return
fi
command -v fix_bootif >/dev/null || . /lib/net-lib.sh
# Write udev rules
{
# bridge: attempt only the defined interface
for i in /tmp/bridge.*.info; do
[ -e "$i" ] || continue
unset bridgeslaves
unset bridgename
. "$i"
RAW_IFACES="$RAW_IFACES $bridgeslaves"
MASTER_IFACES="$MASTER_IFACES $bridgename"
done
# bond: attempt only the defined interface (override bridge defines)
for i in /tmp/bond.*.info; do
[ -e "$i" ] || continue
unset bondslaves
unset bondname
. "$i"
# It is enough to fire up only one
RAW_IFACES="$RAW_IFACES $bondslaves"
MASTER_IFACES="$MASTER_IFACES ${bondname}"
done
for i in /tmp/team.*.info; do
[ -e "$i" ] || continue
unset teamslaves
unset teammaster
. "$i"
RAW_IFACES="$RAW_IFACES ${teamslaves}"
MASTER_IFACES="$MASTER_IFACES ${teammaster}"
done
for j in /tmp/vlan.*.phy; do
[ -e "$j" ] || continue
unset phydevice
read phydevice < "$j"
RAW_IFACES="$RAW_IFACES $phydevice"
for i in /tmp/vlan.*.${phydevice}; do
[ -e "$i" ] || continue
unset vlanname
read vlanname < "$i"
MASTER_IFACES="$MASTER_IFACES ${vlanname}"
done
done
MASTER_IFACES="$(trim "$MASTER_IFACES")"
RAW_IFACES="$(trim "$RAW_IFACES")"
if [ -z "$IFACES" ]; then
[ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
fi
if [ -e /tmp/net.bootdev ]; then
bootdev=$(cat /tmp/net.bootdev)
fi
ifup='/sbin/ifup $env{INTERFACE}'
runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\""
# We have some specific interfaces to handle
if [ -n "${RAW_IFACES}${IFACES}" ]; then
echo 'SUBSYSTEM!="net", GOTO="net_end"'
echo 'ACTION!="add|change|move", GOTO="net_end"'
for iface in $IFACES $RAW_IFACES; do
case "$iface" in
??:??:??:??:??:??) # MAC address
cond="ATTR{address}==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
??-??-??-??-??-??) # MAC address in BOOTIF form
cond="ATTR{address}==\"$(fix_bootif $iface)\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
*) # an interface name
cond="ENV{INTERFACE}==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
cond="NAME==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
esac
# The GOTO prevents us from trying to ifup the same device twice
done
echo 'LABEL="net_end"'
for iface in $IFACES; do
if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
echo "[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh
fi
done
# Default: We don't know the interface to use, handle all
# Fixme: waiting for the interface as well.
else
cond='ACTION=="add", SUBSYSTEM=="net", ENV{DEVTYPE}!="wlan|wwan"'
# if you change the name of "91-default-net.rules", also change modules.d/80cms/cmssetup.sh
echo "$cond, $runcmd" > /etc/udev/rules.d/91-default-net.rules
fi
# if you change the name of "90-net.rules", also change modules.d/80cms/cmssetup.sh
} > /etc/udev/rules.d/90-net.rules
40network/parse-bond.sh 0000755 00000003730 15272355673 0011014 0 ustar 00 #!/bin/sh
#
# Format:
# bond=<bondname>[:<bondslaves>:[:<options>[:<mtu>]]]
#
# bondslaves is a comma-separated list of physical (ethernet) interfaces
# options is a comma-separated list on bonding options (modinfo bonding for details) in format compatible with initscripts
# if options include multi-valued arp_ip_target option, then its values should be separated by semicolon.
#
# bond without parameters assumes bond=bond0:eth0,eth1:mode=balance-rr
#
# if the mtu is specified, it will be set on the bond master
#
# We translate list of slaves to space-separated here to mwke it easier to loop over them in ifup
# Ditto for bonding options
parsebond() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
0) bondname=bond0; bondslaves="eth0 eth1" ;;
1) bondname=$1; bondslaves="eth0 eth1" ;;
2) bondname=$1; bondslaves=$(str_replace "$2" "," " ") ;;
3) bondname=$1; bondslaves=$(str_replace "$2" "," " "); bondoptions=$(str_replace "$3" "," " ") ;;
4) bondname=$1; bondslaves=$(str_replace "$2" "," " "); bondoptions=$(str_replace "$3" "," " "); bondmtu=$4;;
*) die "bond= requires zero to four parameters" ;;
esac
}
# Parse bond for bondname, bondslaves, bondmode, bondoptions and bondmtu
for bond in $(getargs bond=); do
unset bondname
unset bondslaves
unset bondoptions
unset bondmtu
if [ "$bond" != "bond" ]; then
parsebond "$bond"
fi
# Simple default bond
if [ -z "$bondname" ]; then
bondname=bond0
bondslaves="eth0 eth1"
fi
# Make it suitable for initscripts export
bondoptions=$(str_replace "$bondoptions" ";" ",")
echo "bondname=$bondname" > /tmp/bond.${bondname}.info
echo "bondslaves=\"$bondslaves\"" >> /tmp/bond.${bondname}.info
echo "bondoptions=\"$bondoptions\"" >> /tmp/bond.${bondname}.info
echo "bondmtu=\"$bondmtu\"" >> /tmp/bond.${bondname}.info
done
40network/kill-dhclient.sh 0000755 00000000552 15272355673 0011504 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
for f in /tmp/dhclient.*.pid; do
[ -e $f ] || continue
read PID < $f;
kill $PID >/dev/null 2>&1
done
sleep 0.1
for f in /tmp/dhclient.*.pid; do
[ -e $f ] || continue
read PID < $f;
kill -9 $PID >/dev/null 2>&1
done
40network/dhclient-script.sh 0000755 00000021026 15272355673 0012054 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# We already need a set netif here
netif=$interface
setup_interface() {
ip=$new_ip_address
mtu=$new_interface_mtu
mask=$new_subnet_mask
bcast=$new_broadcast_address
gw=${new_routers%%,*}
domain=$new_domain_name
search=$(printf -- "$new_domain_search")
namesrv=$new_domain_name_servers
hostname=$new_host_name
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
[ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
# Taken from debian dhclient-script:
# The 576 MTU is only used for X.25 and dialup connections
# where the admin wants low latency. Such a low MTU can cause
# problems with UDP traffic, among other things. As such,
# disallow MTUs from 576 and below by default, so that broken
# MTUs are ignored, but higher stuff is allowed (1492, 1500, etc).
if [ -n "$mtu" ] && [ $mtu -gt 576 ] ; then
if ! ip link set $netif mtu $mtu ; then
ip link set $netif down
ip link set $netif mtu $mtu
linkup $netif
fi
fi
ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif \
${lease_time:+valid_lft $lease_time} \
${preferred_lft:+preferred_lft ${preferred_lft}}
if [ -n "$gw" ] ; then
if [ "$mask" == "255.255.255.255" ] ; then
# point-to-point connection => set explicit route to gateway
printf 'ip route add %q dev %q\n' "$gw" "$netif" > /tmp/net."$netif".gw
fi
printf 'ip route replace default via %q dev %q\n' "$gw" "$netif" >> /tmp/net."$netif".gw
fi
[ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
if [ -n "$namesrv" ] ; then
for s in $namesrv; do
echo nameserver $s
done
fi >> /tmp/net.$netif.resolv.conf
# Note: hostname can be fqdn OR short hostname, so chop off any
# trailing domain name and explicity add any domain if set.
if [ -n "$hostname" ]; then
safe_hostname=$(printf '%s' "${hostname%.$domain}${domain:+.$domain}")
printf 'echo %q > /proc/sys/kernel/hostname\n' "$safe_hostname" > /tmp/net."$netif".hostname
fi
}
setup_interface6() {
domain=$new_domain_name
search=$(printf -- "$new_domain_search")
namesrv=$new_domain_name_servers
hostname=$new_host_name
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
[ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
ip -6 addr add ${new_ip6_address}/${new_ip6_prefixlen} \
dev ${netif} scope global \
${lease_time:+valid_lft $lease_time} \
${preferred_lft:+preferred_lft ${preferred_lft}}
[ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
if [ -n "$namesrv" ] ; then
for s in $namesrv; do
echo nameserver $s
done
fi >> /tmp/net.$netif.resolv.conf
# Note: hostname can be fqdn OR short hostname, so chop off any
# trailing domain name and explicity add any domain if set.
if [ -n "$hostname" ]; then
safe_hostname=$(printf '%s' "${hostname%.$domain}${domain:+.$domain}")
printf 'echo %q > /proc/sys/kernel/hostname\n' "$safe_hostname" > /tmp/net."$netif".hostname
fi
}
function parse_option_121() {
while [ $# -ne 0 ]; do
mask="$1"
shift
# Is the destination a multicast group?
if [ $1 -ge 224 -a $1 -lt 240 ]; then
multicast=1
else
multicast=0
fi
# Parse the arguments into a CIDR net/mask string
if [ $mask -gt 24 ]; then
destination="$1.$2.$3.$4/$mask"
shift; shift; shift; shift
elif [ $mask -gt 16 ]; then
destination="$1.$2.$3.0/$mask"
shift; shift; shift
elif [ $mask -gt 8 ]; then
destination="$1.$2.0.0/$mask"
shift; shift
else
destination="$1.0.0.0/$mask"
shift
fi
# Read the gateway
gateway="$1.$2.$3.$4"
shift; shift; shift; shift
# Multicast routing on Linux
# - If you set a next-hop address for a multicast group, this breaks with Cisco switches
# - If you simply leave it link-local and attach it to an interface, it works fine.
if [ $multicast -eq 1 ]; then
temp_result="$destination dev $interface"
else
temp_result="$destination via $gateway dev $interface"
fi
echo "/sbin/ip route add $temp_result"
done
}
case $reason in
PREINIT)
echo "dhcp: PREINIT $netif up"
linkup $netif
;;
PREINIT6)
echo "dhcp: PREINIT6 $netif up"
linkup $netif
wait_for_ipv6_dad_link $netif
;;
BOUND)
echo "dhcp: BOND setting $netif"
unset layer2
if [ -f /sys/class/net/$netif/device/layer2 ]; then
read layer2 < /sys/class/net/$netif/device/layer2
fi
if [ "$layer2" != "0" ]; then
if ! arping -f -q -D -c 2 -I $netif $new_ip_address ; then
warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
exit 1
fi
fi
unset layer2
setup_interface
set | while read line; do
[ "${line#new_}" = "$line" ] && continue
echo "$line"
done >/tmp/dhclient.$netif.dhcpopts
{
echo '. /lib/net-lib.sh'
echo "setup_net $netif"
if [ -n "$new_classless_static_routes" ]; then
parse_option_121 $new_classless_static_routes
fi
echo "source_hook initqueue/online $netif"
[ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
} > $hookdir/initqueue/setup_net_$netif.sh
echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
>/tmp/net.$netif.up
if [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
;;
RENEW|REBIND)
unset lease_time
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
ip -4 addr change ${new_ip_address}/${new_subnet_mask} broadcast ${new_broadcast_address} dev ${interface} \
${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
>/dev/null 2>&1
;;
BOUND6)
echo "dhcp: BOND6 setting $netif"
setup_interface6
set | while read line; do
[ "${line#new_}" = "$line" ] && continue
echo "$line"
done >/tmp/dhclient.$netif.dhcpopts
{
echo '. /lib/net-lib.sh'
echo "setup_net $netif"
echo "source_hook initqueue/online $netif"
[ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
} > $hookdir/initqueue/setup_net_$netif.sh
echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
>/tmp/net.$netif.up
if [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
;;
RENEW6|REBIND6)
unset lease_time
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
ip -6 addr change ${new_ip6_address}/${new_ip6_prefixlen} dev ${interface} scope global \
${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
>/dev/null 2>&1
;;
*) echo "dhcp: $reason";;
esac
exit 0
40network/dhclient.conf 0000644 00000000406 15272355673 0011061 0 ustar 00
option classless-static-routes code 121 = array of unsigned integer 8;
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, domain-search, host-name,
root-path, interface-mtu, classless-static-routes;
99microcode_ctl-fw_dir_override/module-setup.sh 0000755 00000010022 15272355673 0015677 0 ustar 00 #!/bin/bash
# Hack in additional firmware directories for supported caveats.
#
# SPDX-License-Identifier: CC0-1.0
check() {
return 0
}
install() {
local FW_DIR=/lib/firmware
local DATA_DIR=/usr/share/microcode_ctl/ucode_with_caveats
local CFG_DIR="/etc/microcode_ctl/ucode_with_caveats"
local check_caveats=/usr/libexec/microcode_ctl/check_caveats
local fw_path_para=$(< /sys/module/firmware_class/parameters/path)
local verbose_opt
local cc_out
local path
local ignored
local do_skip_host_only
local p
verbose_opt=
[ 4 -gt "$stdloglvl" ] || verbose_opt="-v"
# HACK: we override external fw_dir variable in order to get
# an additional ucode based on the kernel version.
dinfo " microcode_ctl module: mangling fw_dir"
[ -z "$fw_dir_l" ] || {
dinfo " microcode_ctl: avoid touching fw_dir as" \
"it has been changed (fw_dir_l is '$fw_dir_l')"
return 0
}
# Reset fw_dir to avoid inclusion of kernel-version-specific directories
# populated with microcode for the late load, only in case it is set
# to the default value to avoid meddling with user-enforced changes.
# The second variant has been introduced in dracut-057~5.
[ \( "x$fw_dir" != \
"x/lib/firmware/updates /lib/firmware /lib/firmware/$kernel" \) -a \
\( "x$fw_dir" != \
"x${fw_path_para:+$fw_path_para }/lib/firmware/updates/$kernel /lib/firmware/updates /lib/firmware/$kernel /lib/firmware" \) ] || {
fw_dir="/lib/firmware/updates /lib/firmware"
dinfo " microcode_ctl: reset fw_dir to \"${fw_dir}\""
}
fw_dir_add=""
while read -d $'\n' -r i; do
dinfo " microcode_ctl: processing data directory " \
"\"$DATA_DIR/$i\"..."
if [ "x" != "x$hostonly" ]; then
do_skip_host_only=0
local sho_overrides="
$CFG_DIR/skip-host-only-check
$CFG_DIR/skip-host-only-check-$i
$FW_DIR/$kernel/skip-host-only-check
$FW_DIR/$kernel/skip-host-only-check-$i"
for p in $(echo "$sho_overrides"); do
[ -e "$p" ] || continue
do_skip_host_only=1
dinfo " microcode_ctl: $i; skipping" \
"Host-Only check, since \"$p\" exists."
break
done
else
do_skip_host_only=1
fi
match_model_opt=""
[ 1 = "$do_skip_host_only" ] || match_model_opt="-m"
if ! cc_out=$($check_caveats -e -k "$kernel" -c "$i" \
$verbose_opt $match_model_opt)
then
dinfo " microcode_ctl: kernel version \"$kernel\"" \
"failed early load check for \"$i\", skipping"
continue
fi
path=$(printf "%s" "$cc_out" | sed -n 's/^paths //p')
[ -n "$path" ] || {
ignored=$(printf "%s" "$cc_out" | \
sed -n 's/^skip_cfgs //p')
if [ -n "$ignored" ]; then
dinfo " microcode_ctl: configuration" \
"\"$i\" is ignored"
else
dinfo " microcode_ctl: no microcode paths" \
"are associated with \"$i\", skipping"
fi
continue
}
dinfo " microcode_ctl: $i: caveats check for kernel" \
"version \"$kernel\" passed, adding" \
"\"$DATA_DIR/$i\" to fw_dir variable"
if [ 0 -eq "$do_skip_host_only" ]; then
fw_dir_add="$DATA_DIR/$i "
else
fw_dir_add="$DATA_DIR/$i $fw_dir_add"
fi
# The list of directories is reverse-sorted in order to preserve the
# "last wins" policy in case of presence of multiple microcode
# revisions.
#
# In case of hostonly == 0, all microcode revisions will be included,
# but since the microcode search is done with the "first wins" policy
# by the (early) microcode loading code, the correct microcode revision
# still has to be picked.
#
# Note that dracut without patch [1] puts only the last directory
# in the early cpio; we try to address this by putting only the last
# matching caveat in the search path, but that workaround works only
# for host-only mode; non-host-only mode early cpio generation is still
# broken without that patch.
#
# [1] https://github.com/dracutdevs/dracut/commit/c44d2252bb4b
done <<-EOF
$(find "$DATA_DIR" -maxdepth 1 -mindepth 1 -type d -printf "%f\n" \
| LC_ALL=C sort)
EOF
fw_dir="${fw_dir_add}${fw_dir}"
dinfo " microcode_ctl: final fw_dir: \"${fw_dir}\""
}
45ifcfg/write-ifcfg.sh 0000755 00000020747 15272355673 0010571 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# NFS root might have reached here before /tmp/net.ifaces was written
type is_persistent_ethernet_name >/dev/null 2>&1 || . /lib/net-lib.sh
udevadm settle --timeout=30
mkdir -m 0755 -p /tmp/ifcfg/
mkdir -m 0755 -p /tmp/ifcfg-leases/
get_config_line_by_subchannel()
{
local CHANNEL
local line
CHANNELS="$1"
while read line || [ -n "$line" ]; do
if strstr "$line" "$CHANNELS"; then
echo $line
return 0
fi
done < /etc/ccw.conf
return 1
}
print_s390() {
local _netif
local SUBCHANNELS
local OPTIONS
local NETTYPE
local CONFIG_LINE
local i
local channel
local OLD_IFS
_netif="$1"
# if we find ccw channel, then use those, instead of
# of the MAC
SUBCHANNELS=$({
for i in /sys/class/net/$_netif/device/cdev[0-9]*; do
[ -e $i ] || continue
channel=$(readlink -f $i)
printf '%s' "${channel##*/},"
done
})
[ -n "$SUBCHANNELS" ] || return 1
SUBCHANNELS=${SUBCHANNELS%,}
echo "SUBCHANNELS=\"${SUBCHANNELS}\""
CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)
[ $? -ne 0 -o -z "$CONFIG_LINE" ] && return 0
OLD_IFS=$IFS
IFS=","
set -- $CONFIG_LINE
IFS=$OLD_IFS
NETTYPE=$1
shift
SUBCHANNELS="$1"
OPTIONS=""
shift
while [ $# -gt 0 ]; do
case $1 in
*=*) OPTIONS="$OPTIONS $1";;
esac
shift
done
OPTIONS=${OPTIONS## }
echo "NETTYPE=\"${NETTYPE}\""
echo "OPTIONS=\"${OPTIONS}\""
return 0
}
hw_bind() {
local _netif="$1"
local _macaddr="$2"
[ -n "$_macaddr" ] \
&& echo "MACADDR=\"$_macaddr\""
print_s390 "$_netif" \
&& return 0
[ -n "$_macaddr" ] && return 0
is_persistent_ethernet_name "$_netif" && return 0
[ -f "/sys/class/net/$_netif/addr_assign_type" ] \
&& [ "$(cat "/sys/class/net/$_netif/addr_assign_type")" != "0" ] \
&& return 1
[ -f "/sys/class/net/$_netif/address" ] \
|| return 1
echo "HWADDR=\"$(cat /sys/class/net/$_netif/address)\""
}
interface_bind() {
local _netif="$1"
local _macaddr="$2"
# see, if we can bind it to some hw parms
if hw_bind "$_netif" "$_macaddr"; then
# only print out DEVICE, if it's user assigned
is_kernel_ethernet_name "$_netif" && return 0
fi
echo "DEVICE=\"$_netif\""
}
for netup in /tmp/net.*.did-setup ; do
[ -f $netup ] || continue
netif=${netup%%.did-setup}
netif=${netif##*/net.}
strstr "$netif" ":*:*:*:*:" && continue
[ -e /tmp/ifcfg/ifcfg-$netif ] && continue
unset bridge
unset bond
unset team
unset bondslaves
unset bondname
unset bondoptions
unset bridgename
unset bridgeslaves
unset uuid
unset ip
unset gw
unset mtu
unset mask
unset macaddr
unset slave
unset ethname
unset vlan
unset phydevice
[ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info
[ -e /tmp/bridge.${netif}.info ] && . /tmp/bridge.${netif}.info
[ -e /tmp/team.${netif}.info ] && . /tmp/team.${netif}.info
[ -e /tmp/net.${netif}.override ] && . /tmp/net.${netif}.override
uuid=$(cat /proc/sys/kernel/random/uuid)
if [ "$netif" = "$bridgename" ]; then
bridge=yes
elif [ "$netif" = "$teammaster" ]; then
team=yes
elif [ "$netif" = "$bondname" ]; then
# $netif can't be bridge and bond at the same time
bond=yes
fi
if ! [ -e /tmp/vlan.${netif}.phy ]; then
for i in /tmp/vlan.${netif}.*; do
[ ! -e "$i" ] && continue
phydevice=${i##/tmp/vlan.${netif}.}
vlan=yes
break
done
fi
# skip team interfaces for now, the host config must be in sync
[ "$netif" = "$teammaster" ] && continue
{
echo "# Generated by dracut initrd"
echo "NAME=\"$netif\""
[ -z "$vlan" ] && interface_bind "$netif" "$macaddr"
echo "ONBOOT=yes"
echo "NETBOOT=yes"
echo "UUID=\"$uuid\""
strstr "$(ip -6 addr show dev $netif)" 'inet6' && echo "IPV6INIT=yes"
if [ -f /tmp/dhclient.$netif.lease ]; then
[ -f /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
if [ -f /tmp/net.$netif.has_ibft_config ]; then
echo "BOOTPROTO=ibft"
else
echo "BOOTPROTO=dhcp"
fi
cp /tmp/dhclient.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease
else
if strstr "$ip" '*:*:*'; then
echo "IPV6INIT=yes"
echo "IPV6_AUTOCONF=no"
echo "IPV6ADDR=\"$ip/$mask\""
else
if [ -f /tmp/net.$netif.has_ibft_config ]; then
echo "BOOTPROTO=ibft"
else
echo "BOOTPROTO=none"
echo "IPADDR=\"$ip\""
if strstr "$mask" "."; then
echo "NETMASK=\"$mask\""
else
echo "PREFIX=\"$mask\""
fi
fi
fi
if strstr "$gw" '*:*:*'; then
echo "IPV6_DEFAULTGW=\"$gw\""
elif [ -n "$gw" ]; then
echo "GATEWAY=\"$gw\""
fi
fi
[ -n "$mtu" ] && echo "MTU=\"$mtu\""
} > /tmp/ifcfg/ifcfg-$netif
# bridge needs different things written to ifcfg
if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ] && [ -z "$team" ]; then
# standard interface
echo "TYPE=Ethernet" >> /tmp/ifcfg/ifcfg-$netif
fi
if [ -n "$vlan" ] ; then
{
echo "TYPE=Vlan"
echo "DEVICE=\"$netif\""
echo "VLAN=yes"
echo "PHYSDEV=\"$phydevice\""
} >> /tmp/ifcfg/ifcfg-$netif
fi
if [ -n "$bond" ] ; then
# bond interface
{
# This variable is an indicator of a bond interface for initscripts
echo "BONDING_OPTS=\"$bondoptions\""
echo "NAME=\"$netif\""
echo "TYPE=Bond"
} >> /tmp/ifcfg/ifcfg-$netif
for slave in $bondslaves ; do
# write separate ifcfg file for the raw eth interface
(
echo "# Generated by dracut initrd"
echo "NAME=\"$slave\""
echo "TYPE=Ethernet"
echo "ONBOOT=yes"
echo "NETBOOT=yes"
echo "SLAVE=yes"
echo "MASTER=\"$netif\""
echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
unset macaddr
[ -e /tmp/net.${slave}.override ] && . /tmp/net.${slave}.override
interface_bind "$slave" "$macaddr"
) >> /tmp/ifcfg/ifcfg-$slave
done
fi
if [ -n "$bridge" ] ; then
# bridge
{
echo "TYPE=Bridge"
echo "NAME=\"$netif\""
} >> /tmp/ifcfg/ifcfg-$netif
for slave in $bridgeslaves ; do
# write separate ifcfg file for the raw eth interface
(
echo "# Generated by dracut initrd"
echo "NAME=\"$slave\""
echo "TYPE=Ethernet"
echo "ONBOOT=yes"
echo "NETBOOT=yes"
echo "BRIDGE=\"$bridgename\""
echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
unset macaddr
[ -e /tmp/net.${slave}.override ] && . /tmp/net.${slave}.override
interface_bind "$slave" "$macaddr"
) >> /tmp/ifcfg/ifcfg-$slave
done
fi
i=1
for ns in $(getargs nameserver); do
echo "DNS${i}=\"${ns}\"" >> /tmp/ifcfg/ifcfg-$netif
i=$((i+1))
done
[ -f /tmp/net.route6."$netif" ] && cp /tmp/net.route6."$netif" /tmp/ifcfg/route6-"$netif"
[ -f /tmp/net.route."$netif" ] && cp /tmp/net.route."$netif" /tmp/ifcfg/route-"$netif"
done
# Pass network opts
mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts
mkdir -m 0755 -p /run/initramfs/state/var/lib/dhclient
echo "files /etc/sysconfig/network-scripts" >> /run/initramfs/rwtab
echo "files /var/lib/dhclient" >> /run/initramfs/rwtab
{
cp /tmp/net.* /run/initramfs/
cp /tmp/net.$netif.resolv.conf /run/initramfs/state/etc/resolv.conf
copytree /tmp/ifcfg /run/initramfs/state/etc/sysconfig/network-scripts
cp /tmp/ifcfg-leases/* /run/initramfs/state/var/lib/dhclient
} > /dev/null 2>&1
45ifcfg/module-setup.sh 0000755 00000000501 15272355673 0010770 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
[[ -d /etc/sysconfig/network-scripts ]] && return 0
return 255
}
depends() {
echo "network"
return 0
}
install() {
inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
}
00bash/module-setup.sh 0000755 00000000636 15272355673 0010627 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
require_binaries /bin/bash
}
depends() {
return 0
}
install() {
# If another shell is already installed, do not use bash
[[ -x $initdir/bin/sh ]] && return
# Prefer bash as /bin/sh if it is available.
inst /bin/bash && ln -sf bash "${initdir}/bin/sh"
}
91crypt-loop/module-setup.sh 0000644 00000000640 15272355674 0012025 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# called by dracut
check() {
require_binaries losetup || return 1
return 255
}
depends() {
echo crypt
}
installkernel() {
instmods loop
}
install() {
inst_multiple losetup
inst "$moddir/crypt-loop-lib.sh" "/lib/dracut-crypt-loop-lib.sh"
dracut_need_initqueue
}
91crypt-loop/crypt-loop-lib.sh 0000755 00000003117 15272355674 0012263 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=4 sw=4 sts=0 et filetype=sh
command -v ask_for_password >/dev/null || . /lib/dracut-crypt-lib.sh
# loop_decrypt mnt_point keypath keydev device
#
# Decrypts symmetrically encrypted key to standard output.
#
# mnt_point - mount point where <keydev> is already mounted
# keypath - LUKS encrypted loop file path relative to <mnt_point>
# keydev - device on which key resides; only to display in prompt
# device - device to be opened by cryptsetup; only to display in prompt
loop_decrypt() {
local mntp="$1"
local keypath="$2"
local keydev="$3"
local device="$4"
local key="/dev/mapper/${mntp##*/}"
if [ ! -b $key ]; then
info "Keyfile has .img suffix, treating it as LUKS-encrypted loop keyfile container to unlock $device"
local loopdev=$(losetup -f "${mntp}/${keypath}" --show)
local opts="-d - luksOpen $loopdev ${key##*/}"
ask_for_password \
--cmd "cryptsetup $opts" \
--prompt "Password ($keypath on $keydev for $device)" \
--tty-echo-off
[ -b $key ] || die "Tried setting it up, but keyfile block device was still not found!"
initqueue --onetime --finished --unique --name "crypt-loop-cleanup-10-${key##*/}" \
$(command -v cryptsetup) "luksClose $key"
initqueue --onetime --finished --unique --name "crypt-loop-cleanup-20-${loopdev##*/}" \
$(command -v losetup) "-d $loopdev"
else
info "Existing keyfile found, re-using it for $device"
fi
cat $key
}
95dasd_mod/parse-dasd-mod.sh 0000755 00000000713 15272355674 0011654 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
mod_args=""
for dasd_arg in $(getargs rd.dasd= -d rd_DASD= DASD=); do
mod_args="$mod_args,$dasd_arg"
done
mod_args="${mod_args#*,}"
if [ -n "$mod_args" ]; then
[ -d /etc/modprobe.d ] || mkdir -m 0755 -p /etc/modprobe.d
echo "options dasd_mod dasd=$mod_args" >> /etc/modprobe.d/dasd_mod.conf
fi
unset dasd_arg
dasd_cio_free
95dasd_mod/module-setup.sh 0000755 00000000761 15272355674 0011502 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _arch=$(uname -m)
[ "$_arch" = "s390" -o "$_arch" = "s390x" ] || return 1
require_binaries grep sed seq
return 0
}
depends() {
return 0
}
installkernel() {
instmods dasd_mod dasd_eckd_mod dasd_fba_mod dasd_diag_mod
}
install() {
inst_hook cmdline 31 "$moddir/parse-dasd-mod.sh"
inst_multiple dasd_cio_free grep sed seq
}
90crypt/crypt-lib.sh 0000755 00000015362 15272355674 0010351 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
command -v getarg >/dev/null || . /lib/dracut-lib.sh
# check if the crypttab contains an entry for a LUKS UUID
crypttab_contains() {
local luks="$1"
local l d rest
if [ -f /etc/crypttab ]; then
while read l d rest; do
strstr "${l##luks-}" "${luks##luks-}" && return 0
strstr "$d" "${luks##luks-}" && return 0
done < /etc/crypttab
fi
return 1
}
# ask_for_password
#
# Wraps around plymouth ask-for-password and adds fallback to tty password ask
# if plymouth is not present.
#
# --cmd command
# Command to execute. Required.
# --prompt prompt
# Password prompt. Note that function already adds ':' at the end.
# Recommended.
# --tries n
# How many times repeat command on its failure. Default is 3.
# --ply-[cmd|prompt|tries]
# Command/prompt/tries specific for plymouth password ask only.
# --tty-[cmd|prompt|tries]
# Command/prompt/tries specific for tty password ask only.
# --tty-echo-off
# Turn off input echo before tty command is executed and turn on after.
# It's useful when password is read from stdin.
ask_for_password() {
local cmd; local prompt; local tries=3
local ply_cmd; local ply_prompt; local ply_tries=3
local tty_cmd; local tty_prompt; local tty_tries=3
local ret
while [ $# -gt 0 ]; do
case "$1" in
--cmd) ply_cmd="$2"; tty_cmd="$2" shift;;
--ply-cmd) ply_cmd="$2"; shift;;
--tty-cmd) tty_cmd="$2"; shift;;
--prompt) ply_prompt="$2"; tty_prompt="$2" shift;;
--ply-prompt) ply_prompt="$2"; shift;;
--tty-prompt) tty_prompt="$2"; shift;;
--tries) ply_tries="$2"; tty_tries="$2"; shift;;
--ply-tries) ply_tries="$2"; shift;;
--tty-tries) tty_tries="$2"; shift;;
--tty-echo-off) tty_echo_off=yes;;
esac
shift
done
{ flock -s 9;
# Prompt for password with plymouth, if installed and running.
if type plymouth >/dev/null 2>&1 && plymouth --ping 2>/dev/null; then
plymouth ask-for-password \
--prompt "$ply_prompt" --number-of-tries=$ply_tries \
--command="$ply_cmd"
ret=$?
else
if [ "$tty_echo_off" = yes ]; then
stty_orig="$(stty -g)"
stty -echo
fi
local i=1
while [ $i -le $tty_tries ]; do
[ -n "$tty_prompt" ] && \
printf "$tty_prompt [$i/$tty_tries]:" >&2
eval "$tty_cmd" && ret=0 && break
ret=$?
i=$(($i+1))
[ -n "$tty_prompt" ] && printf '\n' >&2
done
[ "$tty_echo_off" = yes ] && stty $stty_orig
fi
} 9>/.console_lock
[ $ret -ne 0 ] && echo "Wrong password" >&2
return $ret
}
# Try to mount specified device (by path, by UUID or by label) and check
# the path with 'test'.
#
# example:
# test_dev -f LABEL="nice label" /some/file1
test_dev() {
local test_op=$1; local dev="$2"; local f="$3"
local ret=1; local mount_point=$(mkuniqdir /mnt testdev)
local path
[ -n "$dev" -a -n "$*" ] || return 1
[ -d "$mount_point" ] || die 'Mount point does not exist!'
if mount -r "$dev" "$mount_point" >/dev/null 2>&1; then
test $test_op "${mount_point}/${f}"
ret=$?
umount "$mount_point"
fi
rmdir "$mount_point"
return $ret
}
# match_dev devpattern dev
#
# Returns true if 'dev' matches 'devpattern'. Both 'devpattern' and 'dev' are
# expanded to kernel names and then compared. If name of 'dev' is on list of
# names of devices matching 'devpattern', the test is positive. 'dev' and
# 'devpattern' may be anything which function 'devnames' recognizes.
#
# If 'devpattern' is empty or '*' then function just returns true.
#
# Example:
# match_dev UUID=123 /dev/dm-1
# Returns true if /dev/dm-1 UUID starts with "123".
match_dev() {
[ -z "$1" -o "$1" = '*' ] && return 0
local devlist; local dev
devlist="$(devnames "$1")" || return 255
dev="$(devnames "$2")" || return 255
strstr "
$devlist
" "
$dev
"
}
# getkey keysfile for_dev
#
# Reads file <keysfile> produced by probe-keydev and looks for first line to
# which device <for_dev> matches. The successful result is printed in format
# "<keydev>:<keypath>". When nothing found, just false is returned.
#
# Example:
# getkey /tmp/luks.keys /dev/sdb1
# May print:
# /dev/sdc1:/keys/some.key
getkey() {
local keys_file="$1"; local for_dev="$2"
local luks_dev; local key_dev; local key_path
[ -z "$keys_file" -o -z "$for_dev" ] && die 'getkey: wrong usage!'
[ -f "$keys_file" ] || return 1
local IFS=:
while read luks_dev key_dev key_path; do
if match_dev "$luks_dev" "$for_dev"; then
echo "${key_dev}:${key_path}"
return 0
fi
done < "$keys_file"
return 1
}
# readkey keypath keydev device
#
# Mounts <keydev>, reads key from file <keypath>, optionally processes it (e.g.
# if encrypted with GPG) and prints to standard output which is supposed to be
# read by cryptsetup. <device> is just passed to helper function for
# informational purpose.
readkey() {
local keypath="$1"
local keydev="$2"
local device="$3"
# This creates a unique single mountpoint for *, or several for explicitly
# given LUKS devices. It accomplishes unlocking multiple LUKS devices with
# a single password entry.
local mntp="/mnt/$(str_replace "keydev-$keydev-$keypath" '/' '-')"
if [ ! -d "$mntp" ]; then
mkdir "$mntp"
mount -r "$keydev" "$mntp" || die 'Mounting rem. dev. failed!'
fi
case "${keypath##*.}" in
gpg)
if [ -f /lib/dracut-crypt-gpg-lib.sh ]; then
. /lib/dracut-crypt-gpg-lib.sh
gpg_decrypt "$mntp" "$keypath" "$keydev" "$device"
else
die "No GPG support to decrypt '$keypath' on '$keydev'."
fi
;;
img)
if [ -f /lib/dracut-crypt-loop-lib.sh ]; then
. /lib/dracut-crypt-loop-lib.sh
loop_decrypt "$mntp" "$keypath" "$keydev" "$device"
initqueue --onetime --finished --unique --name "crypt-loop-cleanup-99-${mntp##*/}" \
$(command -v umount) "$mntp; " $(command -v rmdir) "$mntp"
return 0
else
die "No loop file support to decrypt '$keypath' on '$keydev'."
fi
;;
*) cat "$mntp/$keypath" ;;
esac
# General unmounting mechanism, modules doing custom cleanup should return earlier
# and install a pre-pivot cleanup hook
umount "$mntp"
rmdir "$mntp"
}
90crypt/crypt-cleanup.sh 0000755 00000001047 15272355674 0011225 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# close everything which is not busy
rm -f -- /etc/udev/rules.d/70-luks.rules >/dev/null 2>&1
if ! getarg rd.luks.uuid -d rd_LUKS_UUID >/dev/null 2>&1 && getargbool 1 rd.luks -d -n rd_NO_LUKS >/dev/null 2>&1; then
while true; do
local do_break="y"
for i in /dev/mapper/luks-*; do
cryptsetup luksClose $i >/dev/null 2>&1 && do_break=n
done
[ "$do_break" = "y" ] && break
done
fi
90crypt/cryptroot-ask.sh 0000755 00000010272 15272355674 0011260 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
NEWROOT=${NEWROOT:-"/sysroot"}
# do not ask, if we already have root
[ -f $NEWROOT/proc ] && exit 0
# check if destination already exists
[ -b /dev/mapper/$2 ] && exit 0
# we already asked for this device
[ -f /tmp/cryptroot-asked-$2 ] && exit 0
# load dm_crypt if it is not already loaded
[ -d /sys/module/dm_crypt ] || modprobe dm_crypt
. /lib/dracut-crypt-lib.sh
# default luksname - luks-UUID
luksname=$2
# fallback to passphrase
ask_passphrase=1
# if device name is /dev/dm-X, convert to /dev/mapper/name
if [ "${1##/dev/dm-}" != "$1" ]; then
device="/dev/mapper/$(dmsetup info -c --noheadings -o name "$1")"
else
device="$1"
fi
# number of tries
numtries=${3:-10}
# TODO: improve to support what cmdline does
if [ -f /etc/crypttab ] && getargbool 1 rd.luks.crypttab -d -n rd_NO_CRYPTTAB; then
while read name dev luksfile luksoptions; do
# ignore blank lines and comments
if [ -z "$name" -o "${name#\#}" != "$name" ]; then
continue
fi
# UUID used in crypttab
if [ "${dev%%=*}" = "UUID" ]; then
if [ "luks-${dev##UUID=}" = "$2" ]; then
luksname="$name"
break
fi
# path used in crypttab
else
cdev=$(readlink -f $dev)
mdev=$(readlink -f $device)
if [ "$cdev" = "$mdev" ]; then
luksname="$name"
break
fi
fi
done < /etc/crypttab
unset name dev
fi
#
# Open LUKS device
#
info "luksOpen $device $luksname $luksfile $luksoptions"
OLD_IFS="$IFS"
IFS=,
set -- $luksoptions
IFS="$OLD_IFS"
while [ $# -gt 0 ]; do
case $1 in
noauto)
# skip this
exit 0
;;
swap)
# skip this
exit 0
;;
tmp)
# skip this
exit 0
;;
allow-discards)
allowdiscards="--allow-discards"
esac
shift
done
# parse for allow-discards
if strstr "$(cryptsetup --help)" "allow-discards"; then
if discarduuids=$(getargs "rd.luks.allow-discards"); then
discarduuids=$(str_replace "$discarduuids" 'luks-' '')
if strstr " $discarduuids " " ${luksdev##luks-}"; then
allowdiscards="--allow-discards"
fi
elif getargbool 0 rd.luks.allow-discards; then
allowdiscards="--allow-discards"
fi
fi
if strstr "$(cryptsetup --help)" "allow-discards"; then
cryptsetupopts="$cryptsetupopts $allowdiscards"
fi
unset allowdiscards
if [ -n "$luksfile" -a "$luksfile" != "none" -a -e "$luksfile" ]; then
if cryptsetup --key-file "$luksfile" $cryptsetupopts luksOpen "$device" "$luksname"; then
ask_passphrase=0
fi
else
while [ -n "$(getarg rd.luks.key)" ]; do
if tmp=$(getkey /tmp/luks.keys $device); then
keydev="${tmp%%:*}"
keypath="${tmp#*:}"
else
if [ $numtries -eq 0 ]; then
warn "No key found for $device. Fallback to passphrase mode."
break
fi
sleep 1
info "No key found for $device. Will try $numtries time(s) more later."
initqueue --unique --onetime --settled \
--name cryptroot-ask-$luksname \
$(command -v cryptroot-ask) "$device" "$luksname" "$(($numtries-1))"
exit 0
fi
unset tmp
info "Using '$keypath' on '$keydev'"
readkey "$keypath" "$keydev" "$device" \
| cryptsetup -d - $cryptsetupopts luksOpen "$device" "$luksname"
unset keypath keydev
ask_passphrase=0
break
done
fi
if [ $ask_passphrase -ne 0 ]; then
luks_open="$(command -v cryptsetup) $cryptsetupopts luksOpen"
ask_for_password --ply-tries 5 \
--ply-cmd "$luks_open -T1 $device $luksname" \
--ply-prompt "Password ($device)" \
--tty-tries 1 \
--tty-cmd "$luks_open -T5 $device $luksname"
unset luks_open
fi
unset device luksname luksfile
# mark device as asked
>> /tmp/cryptroot-asked-$2
need_shutdown
udevsettle
exit 0
90crypt/probe-keydev.sh 0000755 00000000754 15272355674 0011037 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-crypt-lib.sh
real_keydev="$1"; keypath="$2"; luksdev="$3"
[ -z "$real_keydev" -o -z "$keypath" ] && die 'probe-keydev: wrong usage!'
[ -z "$luksdev" ] && luksdev='*'
info "Probing $real_keydev for $keypath..."
test_dev -f "$real_keydev" "$keypath" || exit 1
info "Found $keypath on $real_keydev"
echo "$luksdev:$real_keydev:$keypath" >> /tmp/luks.keys
90crypt/crypt-run-generator.sh 0000755 00000001567 15272355674 0012375 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
dev=$1
luks=$2
crypttab_contains "$luks" && exit 0
allowdiscards="-"
# parse for allow-discards
if strstr "$(cryptsetup --help)" "allow-discards"; then
if discarduuids=$(getargs "rd.luks.allow-discards"); then
discarduuids=$(str_replace "$discarduuids" 'luks-' '')
if strstr " $discarduuids " " ${luks##luks-}"; then
allowdiscards="allow-discards"
fi
elif getargbool 0 rd.luks.allow-discards; then
allowdiscards="allow-discards"
fi
fi
echo "$luks $dev - timeout=0,$allowdiscards" >> /etc/crypttab
if command -v systemctl >/dev/null; then
systemctl daemon-reload
systemctl start cryptsetup.target
fi
exit 0
90crypt/module-setup.sh 0000755 00000005717 15272355674 0011072 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _rootdev
# if cryptsetup is not installed, then we cannot support encrypted devices.
require_binaries cryptsetup || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs = "crypto_LUKS" ]] && return 0
done
return 255
}
return 0
}
depends() {
echo dm rootfs-block
return 0
}
installkernel() {
instmods dm_crypt =crypto
hostonly="" instmods drbg
}
cmdline() {
local dev UUID
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != "crypto_LUKS" ]] && continue
UUID=$(
blkid -u crypto -o export $dev \
| while read line; do
[[ ${line#UUID} = $line ]] && continue
printf "%s" "${line#UUID=}"
break
done
)
[[ ${UUID} ]] || continue
printf "%s" " rd.luks.uuid=luks-${UUID}"
done
}
install() {
if [[ $hostonly_cmdline == "yes" ]]; then
cmdline >> "${initdir}/etc/cmdline.d/90crypt.conf"
echo >> "${initdir}/etc/cmdline.d/90crypt.conf"
fi
inst_multiple cryptsetup rmdir readlink umount
inst_script "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
inst_script "$moddir"/probe-keydev.sh /sbin/probe-keydev
inst_hook cmdline 10 "$moddir/parse-keydev.sh"
inst_hook cmdline 30 "$moddir/parse-crypt.sh"
if ! dracut_module_included "systemd"; then
inst_hook cleanup 30 "$moddir/crypt-cleanup.sh"
fi
if [[ $hostonly ]] && [[ -f /etc/crypttab ]]; then
# filter /etc/crypttab for the devices we need
while read _mapper _dev _rest || [ -n "$_mapper" ]; do
[[ $_mapper = \#* ]] && continue
[[ $_dev ]] || continue
[[ $_dev == UUID=* ]] && \
_dev="/dev/disk/by-uuid/${_dev#UUID=}"
for _hdev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$_hdev]} == "crypto_LUKS" ]] || continue
if [[ $_hdev -ef $_dev ]] || [[ /dev/block/$_hdev -ef $_dev ]]; then
echo "$_mapper $_dev $_rest"
break
fi
done
done < /etc/crypttab > $initdir/etc/crypttab
fi
inst_simple "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh"
inst_multiple -o \
$systemdutildir/system-generators/systemd-cryptsetup-generator \
$systemdutildir/systemd-cryptsetup \
$systemdsystemunitdir/systemd-ask-password-console.path \
$systemdsystemunitdir/systemd-ask-password-console.service \
$systemdsystemunitdir/cryptsetup.target \
$systemdsystemunitdir/sysinit.target.wants/cryptsetup.target \
systemd-ask-password systemd-tty-ask-password-agent
inst_script "$moddir"/crypt-run-generator.sh /sbin/crypt-run-generator
dracut_need_initqueue
}
90crypt/parse-crypt.sh 0000755 00000006314 15272355674 0010712 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
if ! getargbool 1 rd.luks -d -n rd_NO_LUKS; then
info "rd.luks=0: removing cryptoluks activation"
rm -f -- /etc/udev/rules.d/70-luks.rules
else
{
echo 'SUBSYSTEM!="block", GOTO="luks_end"'
echo 'ACTION!="add|change", GOTO="luks_end"'
} > /etc/udev/rules.d/70-luks.rules.new
LUKS=$(getargs rd.luks.uuid -d rd_LUKS_UUID)
tout=$(getarg rd.luks.key.tout)
if [ -n "$LUKS" ]; then
for luksid in $LUKS; do
luksid=${luksid##luks-}
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
printf -- 'ENV{ID_FS_UUID}=="*%s*", ' $luksid
printf -- 'RUN+="%s --settled --unique --onetime ' $(command -v initqueue)
printf -- '--name cryptroot-ask-%%k %s ' $(command -v cryptroot-ask)
printf -- '$env{DEVNAME} luks-$env{ID_FS_UUID} %s"\n' $tout
} >> /etc/udev/rules.d/70-luks.rules.new
else
if ! crypttab_contains "$luksid"; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
printf -- 'ENV{ID_FS_UUID}=="*%s*", ' $luksid
printf -- 'RUN+="%s --settled --unique --onetime ' $(command -v initqueue)
printf -- '--name systemd-cryptsetup-%%k %s start ' $(command -v systemctl)
printf -- 'systemd-cryptsetup@luks$$(dev_unit_name -$env{ID_FS_UUID}).service"\n'
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
uuid=$luksid
while [ "$uuid" != "${uuid#*-}" ]; do uuid=${uuid%%-*}${uuid#*-}; done
printf -- '[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*%s*-* ] || exit 1\n' $uuid \
>> $hookdir/initqueue/finished/90-crypt.sh
{
printf -- '[ -e /dev/disk/by-uuid/*%s* ] || ' $luksid
printf -- 'warn "crypto LUKS UUID "%s" not found"\n' $luksid
} >> $hookdir/emergency/90-crypt.sh
done
elif getargbool 0 rd.auto; then
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' $(command -v initqueue)
printf -- '--unique --settled --onetime --name cryptroot-ask-%%k '
printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID} %s"\n' $(command -v cryptroot-ask) $tout
} >> /etc/udev/rules.d/70-luks.rules.new
else
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' $(command -v initqueue)
printf -- '--unique --settled --onetime --name crypt-run-generator-%%k '
printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID}"\n' $(command -v crypt-run-generator)
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
echo 'LABEL="luks_end"' >> /etc/udev/rules.d/70-luks.rules.new
mv /etc/udev/rules.d/70-luks.rules.new /etc/udev/rules.d/70-luks.rules
fi
90crypt/parse-keydev.sh 0000755 00000002354 15272355674 0011040 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if getargbool 1 rd.luks -n rd_NO_LUKS && \
[ -n "$(getarg rd.luks.key)" ]; then
exec 7>/etc/udev/rules.d/65-luks-keydev.rules
echo 'SUBSYSTEM!="block", GOTO="luks_keydev_end"' >&7
echo 'ACTION!="add|change", GOTO="luks_keydev_end"' >&7
for arg in $(getargs rd.luks.key); do
unset keypath keydev luksdev
splitsep : "$arg" keypath keydev luksdev
info "rd.luks.key: keypath='$keypath' keydev='$keydev' luksdev='$luksdev'"
if [ -z "$keypath" ]; then
warn 'keypath required!'
continue
fi
if [ -n "$keydev" ]; then
udevmatch "$keydev" >&7 || {
warn 'keydev incorrect!'
continue
}
printf ', ' >&7
fi
{
printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue)
printf -- '--name probe-keydev-%%k '
printf -- '%s /dev/%%k %s %s"\n' \
$(command -v probe-keydev) "${keypath}" "${luksdev}"
} >&7
done
unset arg keypath keydev luksdev
echo 'LABEL="luks_keydev_end"' >&7
exec 7>&-
fi
95fcoe/parse-fcoe.sh 0000755 00000003407 15272355674 0010245 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Supported formats:
# fcoe=<networkdevice>:<dcb|nodcb>
# fcoe=<macaddress>:<dcb|nodcb>
#
# Note currently only nodcb is supported, the dcb option is reserved for
# future use.
#
# Note letters in the macaddress must be lowercase!
#
# Examples:
# fcoe=eth0:nodcb
# fcoe=4a:3f:4c:04:f8:d7:nodcb
[ -z "$fcoe" ] && fcoe=$(getarg fcoe=)
# If it's not set we don't continue
[ -z "$fcoe" ] && return
# BRCM: Later, should check whether bnx2x is loaded first before loading bnx2fc so do not load bnx2fc when there are no Broadcom adapters
[ -e /sys/bus/fcoe/ctlr_create ] || modprobe -b -a fcoe || die "FCoE requested but kernel/initrd does not support FCoE"
initqueue --onetime modprobe -b -q bnx2fc
parse_fcoe_opts() {
local OLDIFS="$IFS"
local IFS=:
set $fcoe
IFS="$OLDIFS"
case $# in
2)
fcoe_interface=$1
fcoe_dcb=$2
return 0
;;
7)
fcoe_mac=$1:$2:$3:$4:$5:$6
fcoe_dcb=$7
return 0
;;
*)
warn "Invalid arguments for fcoe=$fcoe"
return 1
;;
esac
}
parse_fcoe_opts
if [ "$fcoe_interface" = "edd" ]; then
if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then
warn "Invalid FCoE DCB option: $fcoe_dcb"
fi
/sbin/initqueue --settled --unique /sbin/fcoe-edd $fcoe_dcb
else
for fcoe in $(getargs fcoe=); do
unset fcoe_mac
unset fcoe_interface
parse_fcoe_opts
if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then
warn "Invalid FCoE DCB option: $fcoe_dcb"
fi
. $(command -v fcoe-genrules.sh)
done
fi
95fcoe/fcoe-up.sh 0000755 00000004464 15272355674 0007563 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# We get called like this:
# fcoe-up <network-device> <dcb|nodcb>
#
# Note currently only nodcb is supported, the dcb option is reserved for
# future use.
PATH=/usr/sbin:/usr/bin:/sbin:/bin
# Huh? Missing arguments ??
[ -z "$1" -o -z "$2" ] && exit 1
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
netif=$1
dcb=$2
vlan="yes"
iflink=$(cat /sys/class/net/$netif/iflink)
ifindex=$(cat /sys/class/net/$netif/ifindex)
if [ "$iflink" != "$ifindex" ] ; then
# Skip VLAN devices
exit 0
fi
ip link set dev $netif up
linkup "$netif"
netdriver=$(readlink -f /sys/class/net/$netif/device/driver)
netdriver=${netdriver##*/}
write_fcoemon_cfg() {
echo FCOE_ENABLE=\"yes\" > /etc/fcoe/cfg-$netif
if [ "$dcb" = "dcb" ]; then
echo DCB_REQUIRED=\"yes\" >> /etc/fcoe/cfg-$netif
else
echo DCB_REQUIRED=\"no\" >> /etc/fcoe/cfg-$netif
fi
if [ "$vlan" = "yes" ]; then
echo AUTO_VLAN=\"yes\" >> /etc/fcoe/cfg-$netif
else
echo AUTO_VLAN=\"no\" >> /etc/fcoe/cfg-$netif
fi
echo MODE=\"fabric\" >> /etc/fcoe/cfg-$netif
}
if [ "$dcb" = "dcb" ]; then
# wait for lldpad to be ready
i=0
while [ $i -lt 60 ]; do
lldptool -p && break
info "Waiting for lldpad to be ready"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" dcb on && break
info "Retrying to turn dcb on"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" pfc e:1 a:1 w:1 && break
info "Retrying to turn dcb on"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" app:fcoe e:1 a:1 w:1 && break
info "Retrying to turn fcoe on"
sleep 1
i=$(($i+1))
done
sleep 1
write_fcoemon_cfg
fcoemon --syslog
elif [ "$netdriver" = "bnx2x" ]; then
# If driver is bnx2x, do not use /sys/module/fcoe/parameters/create but fipvlan
modprobe 8021q
udevadm settle --timeout=30
# Sleep for 13 s to allow dcb negotiation
sleep 13
fipvlan "$netif" -c -s
else
vlan="no"
write_fcoemon_cfg
fcoemon --syslog
fi
need_shutdown
95fcoe/lldpad.sh 0000644 00000000553 15272355674 0007455 0 ustar 00 #!/bin/bash
# Note lldpad will stay running after switchroot, the system initscripts
# are to kill it and start a new lldpad to take over. Data is transfered
# between the 2 using a shm segment
lldpad -d
# wait for lldpad to be ready
i=0
while [ $i -lt 60 ]; do
lldptool -p && break
info "Waiting for lldpad to be ready"
sleep 1
i=$(($i+1))
done
95fcoe/module-setup.sh 0000755 00000005676 15272355674 0010656 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _fcoe_ctlr
[[ $hostonly ]] || [[ $mount_needs ]] && {
for c in /sys/bus/fcoe/devices/ctlr_* ; do
[ -L $c ] || continue
_fcoe_ctlr=$c
done
[ -z "$_fcoe_ctlr" ] && return 255
}
require_binaries dcbtool fipvlan lldpad ip readlink fcoemon fcoeadm || return 1
return 0
}
depends() {
echo network rootfs-block
return 0
}
installkernel() {
instmods fcoe 8021q edd
}
get_vlan_parent() {
local link=$1
[ -d $link ] || return
read iflink < $link/iflink
for if in /sys/class/net/* ; do
read idx < $if/ifindex
if [ $idx -eq $iflink ] ; then
echo ${if##*/}
fi
done
}
# called by dracut
cmdline() {
for c in /sys/bus/fcoe/devices/ctlr_* ; do
[ -L $c ] || continue
read enabled < $c/enabled
[ $enabled -eq 0 ] && continue
d=$(cd -P $c; echo $PWD)
i=${d%/*}
read mac < ${i}/address
s=$(dcbtool gc ${i##*/} dcb | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
if [ -z "$s" ] ; then
p=$(get_vlan_parent ${i})
if [ "$p" ] ; then
s=$(dcbtool gc ${p} dcb | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
fi
fi
if [ "$s" = "on" ] ; then
dcb="dcb"
else
dcb="nodcb"
fi
# Some Combined Network Adapters(CNAs) implement DCB in firmware.
# Do not run software-based DCB or LLDP on CNAs that implement DCB.
# If the network interface provides hardware DCB/DCBX capabilities,
# DCB_REQUIRED in "/etc/fcoe/cfg-xxx" is expected to set to "no".
#
# Force "nodcb" if there's any DCB_REQUIRED="no"(child or vlan parent).
grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${i##*/} &>/dev/null
[ $? -eq 0 ] && dcb="nodcb"
if [ "$p" ] ; then
grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${p} &>/dev/null
[ $? -eq 0 ] && dcb="nodcb"
fi
echo "fcoe=${mac}:${dcb}"
done
}
# called by dracut
install() {
inst_multiple ip dcbtool fipvlan lldpad readlink lldptool fcoemon fcoeadm
inst_libdir_file 'libhbalinux.so*'
[[ -e /etc/hba.conf ]] && inst "/etc/hba.conf" "/etc/hba.conf"
mkdir -m 0755 -p "$initdir/var/lib/lldpad"
mkdir -m 0755 -p "$initdir/etc/fcoe"
if [[ $hostonly_cmdline == "yes" ]] ; then
local _fcoeconf=$(cmdline)
[[ $_fcoeconf ]] && printf "%s\n" "$_fcoeconf" >> "${initdir}/etc/cmdline.d/95fcoe.conf"
fi
inst "$moddir/fcoe-up.sh" "/sbin/fcoe-up"
inst "$moddir/fcoe-edd.sh" "/sbin/fcoe-edd"
inst "$moddir/fcoe-genrules.sh" "/sbin/fcoe-genrules.sh"
inst_hook pre-trigger 03 "$moddir/lldpad.sh"
inst_hook cmdline 99 "$moddir/parse-fcoe.sh"
inst_hook cleanup 90 "$moddir/cleanup-fcoe.sh"
dracut_need_initqueue
}
95fcoe/fcoe-genrules.sh 0000755 00000001461 15272355674 0010755 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# We use (fcoe_interface or fcoe_mac) and fcoe_dcb as set by parse-fcoe.sh
# If neither mac nor interface are set we don't continue
[ -z "$fcoe_interface" -a -z "$fcoe_mac" ] && return
# Write udev rules
{
if [ -n "$fcoe_mac" ] ; then
printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s"\n' "$fcoe_mac" "$fcoe_dcb"
else
printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s"\n' "$fcoe_interface" "$fcoe_dcb"
fi
} >> /etc/udev/rules.d/92-fcoe.rules
95fcoe/fcoe-edd.sh 0000755 00000002371 15272355674 0007666 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
dcb="$1"
_modprobe_r_edd="0"
check_edd() {
local cnt=0
[ -d /sys/firmware/edd ] && return 0
_modprobe_r_edd="1"
modprobe edd || return $?
while [ $cnt -lt 600 ]; do
[ -d /sys/firmware/edd ] && return 0
cnt=$(($cnt+1))
sleep 0.1
done
return 1
}
check_edd || exit 1
for disk in /sys/firmware/edd/int13_*; do
[ -d "$disk" ] || continue
if [ -e "${disk}/pci_dev/driver" ]; then
driver=$(readlink "${disk}/pci_dev/driver")
driver=${driver##*/}
fi
# i40e uses dev_port 1 for a virtual fcoe function
if [ "${driver}" == "i40e" ]; then
dev_port=1
fi
for nic in "${disk}"/pci_dev/net/*; do
[ -d "$nic" ] || continue
if [ -n "${dev_port}" -a -e "${nic}/dev_port" ]; then
if [ "$(cat ${nic}/dev_port)" -ne "${dev_port}" ]; then
continue
fi
fi
if [ -e ${nic}/address ]; then
fcoe_interface=${nic##*/}
if ! [ -e "/tmp/.fcoe-$fcoe_interface" ]; then
/sbin/fcoe-up "$fcoe_interface" "$dcb"
> "/tmp/.fcoe-$fcoe_interface"
fi
fi
done
done
[ "$_modprobe_r_edd" = "1" ] && modprobe -r edd
unset _modprobe_r_edd
95fcoe/cleanup-fcoe.sh 0000644 00000000553 15272355674 0010556 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /var/run/lldpad.pid ]; then
lldpad -k
mkdir -m 0755 -p /run/initramfs/state/dev/shm
cp /dev/shm/lldpad.state /run/initramfs/state/dev/shm/ > /dev/null 2>&1
echo "files /dev/shm/lldpad.state" >> /run/initramfs/rwtab
fi
90mdraid/mdraid-needshutdown.sh 0000755 00000000411 15272355674 0012475 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
for md in /dev/md[0-9_]*; do
[ -b "$md" ] || continue
need_shutdown
break
done
90mdraid/mdraid-waitclean.sh 0000755 00000001616 15272355674 0011745 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if getargbool 0 rd.md.waitclean; then
_offroot=$(strstr "$(mdadm --help-options 2>&1)" offroot && echo --offroot)
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
containers=""
for md in /dev/md[0-9_]*; do
[ -b "$md" ] || continue
udevinfo="$(udevadm info --query=env --name=$md)"
strstr "$udevinfo" "DEVTYPE=partition" && continue
if strstr "$udevinfo" "MD_LEVEL=container"; then
containers="$containers $md"
continue
fi
info "Waiting for $md to become clean"
mdadm $_offroot -W "$md" >/dev/null 2>&1
done
for md in $containers; do
info "Waiting for $md to become clean"
mdadm $_offroot -W "$md" >/dev/null 2>&1
done
unset containers udevinfo _offroot
fi
90mdraid/mdraid-cleanup.sh 0000755 00000001304 15272355674 0011417 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
_offroot=$(strstr "$(mdadm --help-options 2>&1)" offroot && echo --offroot)
containers=""
for md in /dev/md[0-9_]*; do
[ -b "$md" ] || continue
udevinfo="$(udevadm info --query=env --name=$md)"
strstr "$udevinfo" "DEVTYPE=partition" && continue
if strstr "$udevinfo" "MD_LEVEL=container"; then
containers="$containers $md"
continue
fi
mdadm $_offroot -S "$md" >/dev/null 2>&1
done
for md in $containers; do
mdadm $_offroot -S "$md" >/dev/null 2>&1
done
unset containers udevinfo _offroot
90mdraid/md-noddf.sh 0000755 00000000305 15272355674 0010222 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
info "rd.md.ddf=0: no MD RAID for SNIA ddf raids"
udevproperty rd_NO_MDDDF=1
90mdraid/mdmon-pre-shutdown.sh 0000755 00000000522 15272355674 0012302 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
_do_mdmon_takeover() {
local ret
mdmon --takeover --all
ret=$?
[ $ret -eq 0 ] && info "Taking over mdmon processes."
return $ret
}
if command -v mdmon >/dev/null; then
_do_mdmon_takeover $1
fi
90mdraid/65-md-incremental-imsm.rules 0000644 00000002704 15272355674 0013346 0 ustar 00 # This file causes block devices with Linux RAID (mdadm) signatures to
# automatically cause mdadm to be run.
# See udev(8) for syntax
ACTION!="add|change", GOTO="md_end"
SUBSYSTEM!="block", GOTO="md_end"
ENV{rd_NO_MD}=="?*", GOTO="md_end"
KERNEL=="md*", ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end"
KERNEL=="md*", ACTION!="change", GOTO="md_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="md_end"
ENV{ID_FS_TYPE}=="ddf_raid_member|isw_raid_member|linux_raid_member", GOTO="md_try"
GOTO="md_end"
LABEL="md_try"
ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}=="?*", GOTO="md_end"
ENV{ID_FS_TYPE}=="ddf_raid_member", ENV{rd_NO_MDDDF}=="?*", GOTO="md_end"
# already done ?
PROGRAM="/bin/sh -c 'for i in $sys/$devpath/holders/md[0-9_]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
GOTO="md_end"
# for native arrays - array's uuid has to be specified
# for containers - container's uuid has to be specified
# TODO : how to get embedded array's uuid having container's component ?
#
# UUID CHECK
ENV{DEVTYPE}!="partition", \
RUN+="/sbin/partx -d --nr 1-1024 $env{DEVNAME}"
RUN+="/sbin/initqueue --timeout --name 50-mdraid_start --onetime --unique /sbin/mdraid_start"
#
# Incrementally build the md array; this will automatically assemble
# any eventual containers as well (imsm, ddf)
#
LABEL="md_incremental"
RUN+="/sbin/mdadm $env{rd_MD_OFFROOT} -I $env{DEVNAME}"
LABEL="md_end"
90mdraid/md-shutdown.sh 0000755 00000001240 15272355674 0011002 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
_do_md_shutdown() {
local ret
local final=$1
local _offroot=$(strstr "$(mdadm --help-options 2>&1)" offroot && echo --offroot)
info "Waiting for mdraid devices to be clean."
mdadm $_offroot -vv --wait-clean --scan| vinfo
ret=$?
info "Disassembling mdraid devices."
mdadm $_offroot -vv --stop --scan | vinfo
ret=$(($ret+$?))
if [ "x$final" != "x" ]; then
info "/proc/mdstat:"
vinfo < /proc/mdstat
fi
return $ret
}
if command -v mdadm >/dev/null; then
_do_md_shutdown $1
else
:
fi
90mdraid/module-setup.sh 0000755 00000007770 15272355674 0011172 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _rootdev
# No mdadm? No mdraid support.
require_binaries mdadm || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
DEVPATH=$(get_devpath_block "$dev")
for holder in "$DEVPATH"/holders/*; do
[[ -e "$holder" ]] || continue
[[ -e "$holder/md" ]] && return 0
break
done
done
return 255
}
return 0
}
depends() {
echo rootfs-block
return 0
}
installkernel() {
instmods =drivers/md
}
cmdline() {
local _activated dev line UUID
declare -A _activated
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
UUID=$(
/sbin/mdadm --examine --export $dev \
| while read line; do
[[ ${line#MD_UUID=} = $line ]] && continue
printf "%s" "${line#MD_UUID=} "
done
)
[[ -z "$UUID" ]] && continue
if ! [[ ${_activated[${UUID}]} ]]; then
printf "%s" " rd.md.uuid=${UUID}"
_activated["${UUID}"]=1
fi
done
}
install() {
local rule rule_path
inst_multiple cat
inst_multiple -o mdmon
inst $(command -v partx) /sbin/partx
inst $(command -v mdadm) /sbin/mdadm
if [[ $hostonly_cmdline == "yes" ]]; then
cmdline >> "${initdir}/etc/cmdline.d/90mdraid.conf"
echo >> "${initdir}/etc/cmdline.d/90mdraid.conf"
fi
# <mdadm-3.3 udev rule
inst_rules 64-md-raid.rules
# >=mdadm-3.3 udev rules
inst_rules 63-md-raid-arrays.rules 64-md-raid-assembly.rules
# remove incremental assembly from stock rules, so they don't shadow
# 65-md-inc*.rules and its fine-grained controls, or cause other problems
# when we explicitly don't want certain components to be incrementally
# assembled
for rule in 64-md-raid.rules 64-md-raid-assembly.rules; do
rule_path="${initdir}${udevdir}/rules.d/${rule}"
[ -f "${rule_path}" ] && sed -i -r \
-e '/RUN\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(\$env\{DEVNAME\}|\$tempnode|\$devnode)/d' \
"${rule_path}"
done
inst_rules "$moddir/65-md-incremental-imsm.rules"
inst_rules "$moddir/59-persistent-storage-md.rules"
prepare_udev_rules 59-persistent-storage-md.rules
# guard against pre-3.0 mdadm versions, that can't handle containers
if ! mdadm -Q -e imsm /dev/null >/dev/null 2>&1; then
inst_hook pre-trigger 30 "$moddir/md-noimsm.sh"
fi
if ! mdadm -Q -e ddf /dev/null >/dev/null 2>&1; then
inst_hook pre-trigger 30 "$moddir/md-noddf.sh"
fi
if [[ $hostonly ]] || [[ $mdadmconf = "yes" ]]; then
if [ -f /etc/mdadm.conf ]; then
inst /etc/mdadm.conf
else
[ -f /etc/mdadm/mdadm.conf ] && inst /etc/mdadm/mdadm.conf /etc/mdadm.conf
fi
if [ -d /etc/mdadm.conf.d ]; then
local f
inst_dir /etc/mdadm.conf.d
for f in /etc/mdadm.conf.d/*.conf; do
[ -f "$f" ] || continue
inst "$f"
done
fi
fi
inst_hook pre-udev 30 "$moddir/mdmon-pre-udev.sh"
inst_hook pre-trigger 30 "$moddir/parse-md.sh"
inst_hook pre-mount 10 "$moddir/mdraid-waitclean.sh"
inst_hook cleanup 99 "$moddir/mdraid-needshutdown.sh"
inst_hook shutdown 30 "$moddir/md-shutdown.sh"
inst_script "$moddir/mdraid-cleanup.sh" /sbin/mdraid-cleanup
inst_script "$moddir/mdraid_start.sh" /sbin/mdraid_start
if dracut_module_included "systemd"; then
if [ -e $systemdsystemunitdir/mdmon@.service ]; then
inst_simple $systemdsystemunitdir/mdmon@.service
fi
fi
inst_hook pre-shutdown 30 "$moddir/mdmon-pre-shutdown.sh"
}
90mdraid/mdmon-pre-udev.sh 0000755 00000000360 15272355674 0011372 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# save state dir for mdmon/mdadm for the real root
[ -d /run/mdadm ] || mkdir -m 0755 /run/mdadm
# backward compat link
90mdraid/59-persistent-storage-md.rules 0000644 00000001513 15272355674 0013744 0 ustar 00 SUBSYSTEM!="block", GOTO="md_end"
ACTION!="add|change", GOTO="md_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="md_end"
KERNEL!="md[0-9]*|md_d[0-9]*|md/*", KERNEL!="md*", GOTO="md_end"
# partitions have no md/{array_state,metadata_version}
ENV{DEVTYPE}=="partition", GOTO="md_ignore_state"
# container devices have a metadata version of e.g. 'external:ddf' and
# never leave state 'inactive'
ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state"
TEST!="md/array_state", GOTO="md_end"
ATTR{md/array_state}=="|clear|inactive", GOTO="md_end"
LABEL="md_ignore_state"
IMPORT{program}="/sbin/mdadm --detail --export $tempnode"
IMPORT BLKID
OPTIONS+="link_priority=100"
OPTIONS+="watch"
OPTIONS+="db_persist"
LABEL="md_end"
90mdraid/md-noimsm.sh 0000755 00000000307 15272355675 0010435 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
info "rd.md.imsm=0: no MD RAID for imsm/isw raids"
udevproperty rd_NO_MDIMSM=1
90mdraid/mdraid_start.sh 0000755 00000003637 15272355675 0011223 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getargs >/dev/null 2>&1 || . /lib/dracut-lib.sh
_md_start() {
local _udevinfo
local _path_s
local _path_d
local _md="$1"
local _offroot="$2"
_udevinfo="$(udevadm info --query=env --name="${_md}")"
strstr "$_udevinfo" "MD_LEVEL=container" && continue
strstr "$_udevinfo" "DEVTYPE=partition" && continue
_path_s="/sys/$(udevadm info -q path -n "${_md}")/md/array_state"
[ ! -r "$_path_s" ] && continue
# inactive ?
[ "$(cat "$_path_s")" != "inactive" ] && continue
mdadm $_offroot -R "${_md}" 2>&1 | vinfo
# still inactive ?
[ "$(cat "$_path_s")" = "inactive" ] && continue
_path_d="${_path_s%/*}/degraded"
[ ! -r "$_path_d" ] && continue
> $hookdir/initqueue/work
}
_md_force_run() {
local _offroot
local _md
local _UUID
local _MD_UUID=$(getargs rd.md.uuid -d rd_MD_UUID=)
[ -n "$_MD_UUID" ] || getargbool 0 rd.auto || return
_offroot=$(strstr "$(mdadm --help-options 2>&1)" offroot && echo --offroot)
if [ -n "$_MD_UUID" ]; then
for _md in /dev/md[0-9_]*; do
[ -b "$_md" ] || continue
_UUID=$(
/sbin/mdadm -D --export "$_md" \
| while read line || [ -n "$line" ]; do
str_starts "$line" "MD_UUID=" || continue
printf "%s" "${line#MD_UUID=}"
done
)
[ -z "$_UUID" ] && continue
# check if we should handle this device
strstr " $_MD_UUID " " $_UUID " || continue
_md_start "${_md}" "${_offroot}"
done
else
# try to force-run anything not running yet
for _md in /dev/md[0-9_]*; do
[ -b "$_md" ] || continue
_md_start "${_md}" "${_offroot}"
done
fi
}
_md_force_run
90mdraid/parse-md.sh 0000755 00000004177 15272355675 0010256 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
MD_UUID=$(getargs rd.md.uuid -d rd_MD_UUID=)
if ( ! [ -n "$MD_UUID" ] && ! getargbool 0 rd.auto ) || ! getargbool 1 rd.md -d -n rd_NO_MD; then
info "rd.md=0: removing MD RAID activation"
udevproperty rd_NO_MD=1
else
# rewrite the md rules to only process the specified raid array
if [ -n "$MD_UUID" ]; then
for f in /etc/udev/rules.d/65-md-incremental*.rules; do
[ -e "$f" ] || continue
while read line; do
if [ "${line%%UUID CHECK}" != "$line" ]; then
printf 'IMPORT{program}="/sbin/mdadm --examine --export $tempnode"\n'
for uuid in $MD_UUID; do
printf 'ENV{MD_UUID}=="%s", GOTO="md_uuid_ok"\n' $uuid
done;
printf 'GOTO="md_end"\n'
printf 'LABEL="md_uuid_ok"\n'
else
echo "$line"
fi
done < "${f}" > "${f}.new"
mv "${f}.new" "$f"
done
for uuid in $MD_UUID; do
wait_for_dev "/dev/disk/by-id/md-uuid-${uuid}"
done
fi
fi
if [ -e /etc/mdadm.conf ] && getargbool 1 rd.md.conf -d -n rd_NO_MDADMCONF; then
udevproperty rd_MDADMCONF=1
rm -f -- $hookdir/pre-pivot/*mdraid-cleanup.sh
fi
if ! getargbool 1 rd.md.conf -d -n rd_NO_MDADMCONF; then
rm -f -- /etc/mdadm/mdadm.conf /etc/mdadm.conf
ln -s $(command -v mdraid-cleanup) $hookdir/pre-pivot/31-mdraid-cleanup.sh 2>/dev/null
fi
# noiswmd nodmraid for anaconda / rc.sysinit compatibility
# note nodmraid really means nobiosraid, so we don't want MDIMSM then either
if ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd -n nodmraid; then
info "no MD RAID for imsm/isw raids"
udevproperty rd_NO_MDIMSM=1
fi
# same thing with ddf containers
if ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd -n nodmraid; then
info "no MD RAID for SNIA ddf raids"
udevproperty rd_NO_MDDDF=1
fi
strstr "$(mdadm --help-options 2>&1)" offroot && udevproperty rd_MD_OFFROOT=--offroot
03rescue/module-setup.sh 0000755 00000000644 15272355675 0011204 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
# do not add this module by default
return 255
}
depends() {
return 0
}
install() {
inst_multiple -o ps grep more cat rm strace free showmount \
ping netstat rpcinfo vi scp ping6 ssh \
fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
}
00systemd-bootchart/module-setup.sh 0000755 00000000577 15272355675 0013373 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
[[ "$mount_needs" ]] && return 1
require_binaries $systemdutildir/systemd-bootchart || return 1
return 255
}
depends() {
return 0
}
install() {
inst_symlink /init /sbin/init
inst_multiple $systemdutildir/systemd-bootchart
}
90dmsquash-live/dmsquash-live-genrules.sh 0000755 00000001316 15272355675 0014464 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
case "$root" in
live:/dev/*)
{
printf 'KERNEL=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
${root#live:/dev/}
printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
${root#live:/dev/}
} >> /etc/udev/rules.d/99-live-squash.rules
wait_for_dev -n "${root#live:}"
;;
live:*)
if [ -f "${root#live:}" ]; then
/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root "${root#live:}"
fi
;;
esac
90dmsquash-live/parse-dmsquash-live.sh 0000755 00000003232 15272355675 0013751 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# live images are specified with
# root=live:backingdev
[ -z "$root" ] && root=$(getarg root=)
# support legacy syntax of passing liveimg and then just the base root
if getargbool 0 rd.live.image -d -y liveimg; then
liveroot="live:$root"
fi
if [ "${root%%:*}" = "live" ] ; then
liveroot=$root
fi
[ "${liveroot%%:*}" = "live" ] || return
modprobe -q loop
case "$liveroot" in
live:LABEL=*|LABEL=*) \
root="${root#live:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="live:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
live:CDLABEL=*|CDLABEL=*) \
root="${root#live:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="live:/dev/disk/by-label/${root#CDLABEL=}"
rootok=1 ;;
live:UUID=*|UUID=*) \
root="${root#live:}"
root="live:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
live:PARTUUID=*|PARTUUID=*) \
root="${root#live:}"
root="live:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
live:PARTLABEL=*|PARTLABEL=*) \
root="${root#live:}"
root="live:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
live:/*.[Ii][Ss][Oo]|/*.[Ii][Ss][Oo])
root="${root#live:}"
root="liveiso:${root}"
rootok=1 ;;
live:/dev/*)
rootok=1 ;;
live:/*.[Ii][Mm][Gg]|/*.[Ii][Mm][Gg])
[ -f "${root#live:}" ] && rootok=1 ;;
esac
info "root was $liveroot, is now $root"
# make sure that init doesn't complain
[ -z "$root" ] && root="live"
wait_for_dev -n /dev/mapper/live-rw
90dmsquash-live/dmsquash-liveiso-genrules.sh 0000755 00000000616 15272355675 0015201 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ "${root%%:*}" = "liveiso" ]; then
{
printf 'KERNEL=="loop-control", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root `/sbin/losetup -f --show %s`"\n' \
${root#liveiso:}
} >> /etc/udev/rules.d/99-liveiso-mount.rules
fi
90dmsquash-live/dmsquash-live-root.sh 0000755 00000024360 15272355675 0013627 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
command -v unpack_archive >/dev/null || . /lib/img-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
if getargbool 0 rd.live.debug -n -y rdlivedebug; then
exec > /tmp/liveroot.$$.out
exec 2>> /tmp/liveroot.$$.out
set -x
fi
[ -z "$1" ] && exit 1
livedev="$1"
# parse various live image specific options that make sense to be
# specified as their own things
live_dir=$(getarg rd.live.dir -d live_dir)
[ -z "$live_dir" ] && live_dir="LiveOS"
squash_image=$(getarg rd.live.squashimg)
[ -z "$squash_image" ] && squash_image="squashfs.img"
getargbool 0 rd.live.ram -d -y live_ram && live_ram="yes"
getargbool 0 rd.live.overlay.reset -d -y reset_overlay && reset_overlay="yes"
getargbool 0 rd.live.overlay.readonly -d -y readonly_overlay && readonly_overlay="--readonly" || readonly_overlay=""
overlay=$(getarg rd.live.overlay -d overlay)
getargbool 0 rd.writable.fsimg -d -y writable_fsimg && writable_fsimg="yes"
overlay_size=$(getarg rd.live.overlay.size=)
[ -z "$overlay_size" ] && overlay_size=512
getargbool 0 rd.live.overlay.thin && thin_snapshot="yes"
# CD/DVD media check
[ -b $livedev ] && fs=$(blkid -s TYPE -o value $livedev)
if [ "$fs" = "iso9660" -o "$fs" = "udf" ]; then
check="yes"
fi
getarg rd.live.check -d check || check=""
if [ -n "$check" ]; then
type plymouth >/dev/null 2>&1 && plymouth --hide-splash
if [ -n "$DRACUT_SYSTEMD" ]; then
p=$(str_replace "$livedev" "-" '\x2d')
systemctl start checkisomd5@${p}.service
else
checkisomd5 --verbose $livedev
fi
if [ $? -eq 1 ]; then
die "CD check failed!"
exit 1
fi
type plymouth >/dev/null 2>&1 && plymouth --show-splash
fi
ln -s $livedev /run/initramfs/livedev
# determine filesystem type for a filesystem image
det_img_fs() {
udevadm settle
blkid -s TYPE -u noraid -o value "$1"
}
modprobe squashfs
CMDLINE=$(getcmdline)
for arg in $CMDLINE; do case $arg in ro|rw) liverw=$arg ;; esac; done
# mount the backing of the live image first
mkdir -m 0755 -p /run/initramfs/live
if [ -f $livedev ]; then
# no mount needed - we've already got the LiveOS image in initramfs
# check filesystem type and handle accordingly
fstype=$(det_img_fs $livedev)
case $fstype in
squashfs) SQUASHED=$livedev;;
auto) die "cannot mount live image (unknown filesystem type)" ;;
*) FSIMG=$livedev ;;
esac
[ -e /sys/fs/$fstype ] || modprobe $fstype
else
if [ "$(blkid -o value -s TYPE $livedev)" != "ntfs" ]; then
mount -n -t $fstype -o ${liverw:-ro} $livedev /run/initramfs/live
else
# Symlinking /usr/bin/ntfs-3g as /sbin/mount.ntfs seems to boot
# at the first glance, but ends with lots and lots of squashfs
# errors, because systemd attempts to kill the ntfs-3g process?!
if [ -x "/usr/bin/ntfs-3g" ]; then
( exec -a @ntfs-3g ntfs-3g -o ${liverw:-ro} $livedev /run/initramfs/live ) | vwarn
else
die "Failed to mount block device of live image: Missing NTFS support"
exit 1
fi
fi
if [ "$?" != "0" ]; then
die "Failed to mount block device of live image"
exit 1
fi
fi
# overlay setup helper function
do_live_overlay() {
# create a sparse file for the overlay
# overlay: if non-ram overlay searching is desired, do it,
# otherwise, create traditional overlay in ram
OVERLAY_LOOPDEV=$( losetup -f )
l=$(blkid -s LABEL -o value $livedev) || l=""
u=$(blkid -s UUID -o value $livedev) || u=""
if [ -z "$overlay" ]; then
pathspec="/${live_dir}/overlay-$l-$u"
elif ( echo $overlay | grep -q ":" ); then
# pathspec specified, extract
pathspec=$( echo $overlay | sed -e 's/^.*://' )
fi
if [ -z "$pathspec" -o "$pathspec" = "auto" ]; then
pathspec="/${live_dir}/overlay-$l-$u"
fi
devspec=$( echo $overlay | sed -e 's/:.*$//' )
# need to know where to look for the overlay
setup=""
if [ -n "$devspec" -a -n "$pathspec" -a -n "$overlay" ]; then
mkdir -m 0755 /run/initramfs/overlayfs
mount -n -t auto $devspec /run/initramfs/overlayfs || :
if [ -f /run/initramfs/overlayfs$pathspec -a -w /run/initramfs/overlayfs$pathspec ]; then
losetup $OVERLAY_LOOPDEV /run/initramfs/overlayfs$pathspec
if [ -n "$reset_overlay" ]; then
dd if=/dev/zero of=$OVERLAY_LOOPDEV bs=64k count=1 conv=fsync 2>/dev/null
fi
setup="yes"
fi
umount -l /run/initramfs/overlayfs || :
fi
if [ -z "$setup" -o -n "$readonly_overlay" ]; then
if [ -n "$setup" ]; then
warn "Using temporary overlay."
elif [ -n "$devspec" -a -n "$pathspec" ]; then
warn "Unable to find persistent overlay; using temporary"
sleep 5
fi
dd if=/dev/null of=/overlay bs=1024 count=1 seek=$((overlay_size*1024)) 2> /dev/null
if [ -n "$setup" -a -n "$readonly_overlay" ]; then
RO_OVERLAY_LOOPDEV=$( losetup -f )
losetup $RO_OVERLAY_LOOPDEV /overlay
else
losetup $OVERLAY_LOOPDEV /overlay
fi
fi
# set up the snapshot
sz=$(blockdev --getsz $BASE_LOOPDEV)
if [ -n "$readonly_overlay" ]; then
echo 0 $sz snapshot $BASE_LOOPDEV $OVERLAY_LOOPDEV p 8 | dmsetup create $readonly_overlay live-ro
base="/dev/mapper/live-ro"
over=$RO_OVERLAY_LOOPDEV
else
base=$BASE_LOOPDEV
over=$OVERLAY_LOOPDEV
fi
if [ -n "$thin_snapshot" ]; then
modprobe dm_thin_pool
mkdir /run/initramfs/thin-overlay
# In block units (512b)
thin_data_sz=$(( $overlay_size * 1024 * 1024 / 512 ))
thin_meta_sz=$(( $thin_data_sz / 10 ))
# It is important to have the backing file on a tmpfs
# this is needed to let the loopdevice support TRIM
dd if=/dev/null of=/run/initramfs/thin-overlay/meta bs=1b count=1 seek=$((thin_meta_sz)) 2> /dev/null
dd if=/dev/null of=/run/initramfs/thin-overlay/data bs=1b count=1 seek=$((thin_data_sz)) 2> /dev/null
THIN_META_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/meta )
THIN_DATA_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/data )
echo 0 $thin_data_sz thin-pool $THIN_META_LOOPDEV $THIN_DATA_LOOPDEV 1024 1024 | dmsetup create live-overlay-pool
dmsetup message /dev/mapper/live-overlay-pool 0 "create_thin 0"
# Create a snapshot of the base image
echo 0 $sz thin /dev/mapper/live-overlay-pool 0 $base | dmsetup create live-rw
else
echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
fi
# Create a device that always points to a ro base image
echo 0 $sz linear $base 0 | dmsetup create --readonly live-base
}
# live cd helper function
do_live_from_base_loop() {
do_live_overlay
}
# we might have a genMinInstDelta delta file for anaconda to take advantage of
if [ -e /run/initramfs/live/${live_dir}/osmin.img ]; then
OSMINSQFS=/run/initramfs/live/${live_dir}/osmin.img
fi
if [ -n "$OSMINSQFS" ]; then
# decompress the delta data
dd if=$OSMINSQFS of=/run/initramfs/osmin.img 2> /dev/null
OSMIN_SQUASHED_LOOPDEV=$( losetup -f )
losetup -r $OSMIN_SQUASHED_LOOPDEV /run/initramfs/osmin.img
mkdir -m 0755 -p /run/initramfs/squashfs.osmin
mount -n -t squashfs -o ro $OSMIN_SQUASHED_LOOPDEV /run/initramfs/squashfs.osmin
OSMIN_LOOPDEV=$( losetup -f )
losetup -r $OSMIN_LOOPDEV /run/initramfs/squashfs.osmin/osmin
umount -l /run/initramfs/squashfs.osmin
fi
# we might have an embedded fs image on squashfs (compressed live)
if [ -e /run/initramfs/live/${live_dir}/${squash_image} ]; then
SQUASHED="/run/initramfs/live/${live_dir}/${squash_image}"
fi
if [ -e "$SQUASHED" ] ; then
if [ -n "$live_ram" ] ; then
echo "Copying live image to RAM..."
echo "(this may take a few minutes)"
dd if=$SQUASHED of=/run/initramfs/squashed.img bs=512 2> /dev/null
umount -n /run/initramfs/live
echo "Done copying live image to RAM."
SQUASHED="/run/initramfs/squashed.img"
fi
SQUASHED_LOOPDEV=$( losetup -f )
losetup -r $SQUASHED_LOOPDEV $SQUASHED
mkdir -m 0755 -p /run/initramfs/squashfs
mount -n -t squashfs -o ro $SQUASHED_LOOPDEV /run/initramfs/squashfs
fi
# we might have an embedded fs image to use as rootfs (uncompressed live)
if [ -e /run/initramfs/live/${live_dir}/ext3fs.img ]; then
FSIMG="/run/initramfs/live/${live_dir}/ext3fs.img"
elif [ -e /run/initramfs/live/${live_dir}/rootfs.img ]; then
FSIMG="/run/initramfs/live/${live_dir}/rootfs.img"
elif [ -f /run/initramfs/squashfs/LiveOS/ext3fs.img ]; then
FSIMG="/run/initramfs/squashfs/LiveOS/ext3fs.img"
elif [ -f /run/initramfs/squashfs/LiveOS/rootfs.img ]; then
FSIMG="/run/initramfs/squashfs/LiveOS/rootfs.img"
fi
if [ -n "$FSIMG" ] ; then
BASE_LOOPDEV=$( losetup -f )
if [ -n "$writable_fsimg" ] ; then
# mount the provided fileysstem read/write
echo "Unpacking live filesystem (may take some time)"
mkdir /run/initramfs/fsimg/
if [ -n "$SQUASHED" ]; then
cp -v $FSIMG /run/initramfs/fsimg/rootfs.img
else
unpack_archive $FSIMG /run/initramfs/fsimg/
fi
losetup $BASE_LOOPDEV /run/initramfs/fsimg/rootfs.img
echo "0 $( blockdev --getsize $BASE_LOOPDEV ) linear $BASE_LOOPDEV 0" | dmsetup create live-rw
else
# mount the filesystem read-only and add a dm snapshot for writes
losetup -r $BASE_LOOPDEV $FSIMG
do_live_from_base_loop
fi
fi
[ -e "$SQUASHED" ] && umount -l /run/initramfs/squashfs
if [ -b "$OSMIN_LOOPDEV" ]; then
# set up the devicemapper snapshot device, which will merge
# the normal live fs image, and the delta, into a minimzied fs image
echo "0 $( blockdev --getsz $BASE_LOOPDEV ) snapshot $BASE_LOOPDEV $OSMIN_LOOPDEV p 8" | dmsetup create --readonly live-osimg-min
fi
ROOTFLAGS="$(getarg rootflags)"
if [ -n "$ROOTFLAGS" ]; then
ROOTFLAGS="-o $ROOTFLAGS"
fi
ln -s /dev/mapper/live-rw /dev/root
printf 'mount %s /dev/mapper/live-rw %s\n' "$ROOTFLAGS" "$NEWROOT" > $hookdir/mount/01-$$-live.sh
need_shutdown
exit 0
90dmsquash-live/parse-iso-scan.sh 0000755 00000000465 15272355675 0012710 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# live images are specified with
# root=live:backingdev
isofile=$(getarg iso-scan/filename)
if [ -n "$isofile" ]; then
/sbin/initqueue --settled --unique /sbin/iso-scan "$isofile"
fi
90dmsquash-live/module-setup.sh 0000755 00000002255 15272355675 0012506 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
# a live host-only image doesn't really make a lot of sense
[[ $hostonly ]] && return 1
return 255
}
depends() {
# if dmsetup is not installed, then we cannot support fedora/red hat
# style live images
echo dm rootfs-block img-lib
return 0
}
installkernel() {
instmods squashfs loop iso9660
}
install() {
inst_multiple umount dmsetup blkid dd losetup grep blockdev
inst_multiple -o checkisomd5
inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
inst_hook cmdline 31 "$moddir/parse-iso-scan.sh"
inst_hook pre-udev 30 "$moddir/dmsquash-live-genrules.sh"
inst_hook pre-udev 30 "$moddir/dmsquash-liveiso-genrules.sh"
inst_hook pre-pivot 20 "$moddir/apply-live-updates.sh"
inst_script "$moddir/dmsquash-live-root.sh" "/sbin/dmsquash-live-root"
inst_script "$moddir/iso-scan.sh" "/sbin/iso-scan"
# should probably just be generally included
inst_rules 60-cdrom_id.rules
inst_simple "$moddir/checkisomd5@.service" "/etc/systemd/system/checkisomd5@.service"
dracut_need_initqueue
}
90dmsquash-live/apply-live-updates.sh 0000755 00000000754 15272355675 0013612 0 ustar 00 #!/bin/sh
if [ -b /dev/mapper/live-rw ] && [ -d /updates ]; then
info "Applying updates to live image..."
mount -o bind /run $NEWROOT/run
# avoid overwriting symlinks (e.g. /lib -> /usr/lib) with directories
(
cd /updates
find . -depth -type d | while read dir; do
mkdir -p "$NEWROOT/$dir"
done
find . -depth \! -type d | while read file; do
cp -a "$file" "$NEWROOT/$file"
done
)
umount $NEWROOT/run
fi
90dmsquash-live/iso-scan.sh 0000755 00000001605 15272355675 0011575 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
isofile=$1
[ -z "$isofile" ] && exit 1
ismounted "/run/initramfs/isoscan" && exit 0
mkdir -p "/run/initramfs/isoscan"
do_iso_scan() {
local _name
local dev
for dev in /dev/disk/by-uuid/*; do
_name=$(dev_unit_name "$dev")
[ -e /tmp/isoscan-${_name} ] && continue
> /tmp/isoscan-${_name}
mount -t auto -o ro "$dev" "/run/initramfs/isoscan" || continue
if [ -f "/run/initramfs/isoscan/$isofile" ]; then
losetup -f "/run/initramfs/isoscan/$isofile"
rm -f -- "$job"
exit 0
else
umount "/run/initramfs/isoscan"
fi
done
}
do_iso_scan
rmdir "/run/initramfs/isoscan"
exit 1
90dmsquash-live/checkisomd5@.service 0000644 00000000414 15272355675 0013377 0 ustar 00 [Unit]
Description=Media check on %f
DefaultDependencies=no
Before=shutdown.target
[Service]
Type=oneshot
RemainAfterExit=no
ExecStart=/bin/checkisomd5 --verbose %f
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
TimeoutSec=0
SuccessExitStatus=2
99img-lib/img-lib.sh 0000755 00000004206 15272355675 0010150 0 ustar 00 #!/bin/sh
# img-lib.sh: utilities for dealing with archives and filesystem images.
#
# TODO: identify/unpack rpm, deb, maybe others?
# super-simple "file" that only identifies archives.
# works with stdin if $1 is not set.
det_archive() {
# NOTE: echo -e works in ash and bash, but not dash
local bz="BZh" xz="$(echo -e '\xfd7zXZ')" gz="$(echo -e '\x1f\x8b')"
local headerblock="$(dd ${1:+if=$1} bs=262 count=1 2>/dev/null)"
case "$headerblock" in
$xz*) echo "xz" ;;
$gz*) echo "gzip" ;;
$bz*) echo "bzip2" ;;
07070*) echo "cpio" ;;
*ustar) echo "tar" ;;
esac
}
# determine filesystem type for a filesystem image
det_fs_img() {
local dev=$(losetup --find --show "$1") rv=""
det_fs $dev; rv=$?
losetup -d $dev
return $rv
}
# unpack_archive ARCHIVE OUTDIR
# unpack a (possibly compressed) cpio/tar archive
unpack_archive() {
local img="$1" outdir="$2" archiver="" decompr=""
local ft="$(det_archive $img)"
case "$ft" in
xz|gzip|bzip2) decompr="$ft -dc" ;;
cpio|tar) decompr="cat";;
*) return 1 ;;
esac
ft="$($decompr $img | det_archive)"
case "$ft" in
cpio) archiver="cpio -iumd" ;;
tar) archiver="tar -xf -" ;;
*) return 2 ;;
esac
mkdir -p $outdir
( cd $outdir; $decompr | $archiver 2>/dev/null ) < $img
}
# unpack_fs FSIMAGE OUTDIR
# unpack a filesystem image
unpack_fs() {
local img="$1" outdir="$2" mnt="$(mkuniqdir /tmp unpack_fs.)"
mount -o loop $img $mnt || { rmdir $mnt; return 1; }
mkdir -p $outdir; outdir="$(cd $outdir; pwd)"
copytree $mnt $outdir
umount $mnt
rmdir $mnt
}
# unpack an image file - compressed/uncompressed cpio/tar, filesystem, whatever
# unpack_img IMAGEFILE OUTDIR
unpack_img() {
local img="$1" outdir="$2"
[ -r "$img" ] || { warn "can't read img!"; return 1; }
[ -n "$outdir" ] || { warn "unpack_img: no output dir given"; return 1; }
if [ "$(det_archive $img)" ]; then
unpack_archive "$@" || { warn "can't unpack archive file!"; return 1; }
else
unpack_fs "$@" || { warn "can't unpack filesystem image!"; return 1; }
fi
}
99img-lib/module-setup.sh 0000755 00000000542 15272355675 0011252 0 ustar 00 #!/bin/bash
# module-setup for img-lib
check() {
require_binaries tar gzip dd bash || return 1
return 255
}
depends() {
return 0
}
install() {
inst_multiple tar gzip dd bash
# TODO: make this conditional on a cmdline flag / config option
inst_multiple -o cpio xz bzip2
inst_simple "$moddir/img-lib.sh" "/lib/img-lib.sh"
}
50plymouth/plymouth-pretrigger.sh 0000755 00000002251 15272355675 0013203 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if type plymouthd >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH; then
# first trigger graphics subsystem
udevadm trigger --action=add --attr-match=class=0x030000 >/dev/null 2>&1
# first trigger graphics and tty subsystem
udevadm trigger --action=add --subsystem-match=graphics --subsystem-match=drm --subsystem-match=tty >/dev/null 2>&1
udevadm settle --timeout=30 2>&1 | vinfo
info "Starting plymouth daemon"
mkdir -m 0755 /run/plymouth
read consoledev rest < /sys/class/tty/console/active
consoledev=${consoledev:-tty0}
[ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
plymouthd --attach-to-session --pid-file /run/plymouth/pid
plymouth --show-splash 2>&1 | vinfo
# reset tty after plymouth messed with it
[ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
fi
fi
50plymouth/module-setup.sh 0000755 00000001546 15272355675 0011603 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
[[ "$mount_needs" ]] && return 1
require_binaries plymouthd plymouth
}
depends() {
echo drm
}
install() {
if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
|| [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
. "$moddir"/plymouth-populate-initrd.sh
else
PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
/usr/libexec/plymouth/plymouth-populate-initrd -t "$initdir"
fi
inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
inst_multiple readlink
if ! dracut_module_included "systemd"; then
inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
fi
}
50plymouth/plymouth-newroot.sh 0000755 00000000337 15272355675 0012531 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if type plymouth >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
plymouth --newroot=$NEWROOT
fi
50plymouth/plymouth-populate-initrd.sh 0000755 00000002742 15272355675 0014156 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
PLYMOUTH_THEME=$(plymouth-set-default-theme)
inst_multiple plymouthd plymouth \
"${PLYMOUTH_LOGO_FILE}" \
/etc/system-release
mkdir -m 0755 -p "${initdir}/usr/share/plymouth"
inst_libdir_file "plymouth/text.so" "plymouth/details.so"
if [[ $hostonly ]]; then
inst_multiple \
"/usr/share/plymouth/themes/details/details.plymouth" \
"/usr/share/plymouth/themes/text/text.plymouth" \
if [[ -d /usr/share/plymouth/themes/${PLYMOUTH_THEME} ]]; then
for x in "/usr/share/plymouth/themes/${PLYMOUTH_THEME}"/* ; do
[[ -f "$x" ]] || break
inst $x
done
fi
if [ -L /usr/share/plymouth/themes/default.plymouth ]; then
inst /usr/share/plymouth/themes/default.plymouth
# Install plugin for this theme
PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c; do echo $b; done;)
inst_libdir_file "plymouth/${PLYMOUTH_PLUGIN}.so"
fi
else
for x in /usr/share/plymouth/themes/{text,details}/* ; do
[[ -f "$x" ]] || continue
THEME_DIR=$(dirname "$x")
mkdir -m 0755 -p "${initdir}/$THEME_DIR"
inst_multiple "$x"
done
(
cd ${initdir}/usr/share/plymouth/themes;
ln -s text/text.plymouth default.plymouth 2>&1;
)
fi
50plymouth/plymouth-emergency.sh 0000755 00000000240 15272355675 0013003 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
plymouth --hide-splash 2>/dev/null || :
99uefi-lib/uefi-lib.sh 0000755 00000011363 15272355675 0010502 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Copyright 2013 Red Hat, Inc. All rights reserved.
# Copyright 2013 Harald Hoyer <harald@redhat.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
getbyte () {
local IFS= LC_CTYPE=C res c
read -r -n 1 -d '' c
res=$?
# the single quote in the argument of the printf
# yields the numeric value of $c (ASCII since LC_CTYPE=C)
[[ -n $c ]] && c=$(printf '%u' "'$c") || c=0
printf "$c"
return $res
}
getword () {
local b1 b2 val
b1=$(getbyte) || return 1
b2=$(getbyte) || return 1
(( val = b2 * 256 + b1 ))
echo $val
return 0
}
# Acpi(PNP0A08,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(90E2BA265ED4,0x0)/Vlan(172)/Fibre(0x4EA06104A0CC0050,0x0)
uefi_device_path()
{
local IFS= LC_CTYPE=C res tt len type hextype first
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
if [[ $first == 1 ]]; then
first=0
elif [[ $hextype != "7fff" ]]; then
printf "/"
fi
case $hextype in
0101)
# PCI
tt=$(getword)
printf "PCI(0x%x,0x%x)" $(($tt / 256)) $(($tt & 255))
;;
0201)
# ACPI
printf "Acpi(0x%x,0x%x)" $(($(getword) + $(getword) * 65536)) $(($(getword) + $(getword) * 65536))
;;
0303)
# FIBRE
getword &>/dev/null
getword &>/dev/null
printf "Fibre(0x%x%x%x%x%x%x%x%x,0x%x)" \
$(getbyte) $(getbyte) $(getbyte) $(getbyte) \
$(getbyte) $(getbyte) $(getbyte) $(getbyte) \
$(( $(getword) + $(getword) * 65536 + 4294967296 * ( $(getword) + $(getword) * 65536 ) ))
;;
030b)
# MAC
printf "MAC(%02x%02x%02x%02x%02x%02x," $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte)
read -r -N 26 tt || return 1
printf "0x%x)" $(getbyte)
;;
0314)
# VLAN
printf "VLAN(%d)" $(getword)
;;
7fff)
# END
printf "\n"
return 0
;;
*)
printf "Unknown(Type:%d SubType:%d len=%d)" "$type" "$subtype" "$len"
read -r -N $(($len-4)) tt || return 1
;;
esac
done
}
get_fcoe_boot_mac()
{
data=${1:-/sys/firmware/efi/vars/FcoeBootDevice-a0ebca23-5f9c-447a-a268-22b6c158c2ac/data}
[ -f $data ] || return 1
local IFS= LC_CTYPE=C tt len type hextype
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
case $hextype in
030b)
# MAC
printf "%02x:%02x:%02x:%02x:%02x:%02x" $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte)
read -r -N 27 tt || return 1
;;
7fff)
# END
return 0
;;
*)
read -r -N $(($len-4)) tt || return 1
;;
esac
done < $data
}
get_fcoe_boot_vlan()
{
data=${1:-/sys/firmware/efi/vars/FcoeBootDevice-a0ebca23-5f9c-447a-a268-22b6c158c2ac/data}
[ -f $data ] || return 1
local IFS= LC_CTYPE=C tt len type hextype
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
case $hextype in
0314)
# VLAN
printf "%d" $(getword)
;;
7fff)
# END
return 0
;;
*)
read -r -N $(($len-4)) tt || return 1
;;
esac
done < $data
}
99uefi-lib/module-setup.sh 0000755 00000000357 15272355676 0011433 0 ustar 00 #!/bin/bash
# module-setup for img-lib
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo bash
return 0
}
# called by dracut
install() {
inst_simple "$moddir/uefi-lib.sh" "/lib/uefi-lib.sh"
}
98syslog/rsyslogd-stop.sh 0000755 00000000526 15272355676 0011462 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# Kills rsyslogd
if [ -f /var/run/syslogd.pid ]; then
read pid < /var/run/syslogd.pid
kill $pid
kill -0 $pid && kill -9 $pid
else
warn "rsyslogd-stop: Could not find a pid for rsyslogd. Won't kill it."
fi 98syslog/README 0000644 00000001500 15272355676 0007143 0 ustar 00 Syslog support for dracut
This module provides syslog functionality in the initrd.
This is especially interesting when complex configuration being
used to provide access to the device the rootfs resides on.
When this module is installed into the ramfs it is triggered by
the udev event from the nic being setup (online).
Then if syslog is configured it is started and will forward all
kernel messages to the given syslog server.
The syslog implementation is detected automatically by finding the
apropriate binary with the following order:
rsyslogd
syslogd
syslog-ng
Then if detected the syslog.conf is generated and syslog is started.
Bootparameters:
syslogserver=ip Where to syslog to
sysloglevel=level What level has to be logged
syslogtype=rsyslog|syslog|syslogng
Don't auto detect syslog but set it
98syslog/parse-syslog-opts.sh 0000755 00000001363 15272355676 0012244 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# Parses the syslog commandline options
#
#Bootparameters:
#syslogserver=ip Where to syslog to
#sysloglevel=level What level has to be logged
#syslogtype=rsyslog|syslog|syslogng
# Don't auto detect syslog but set it
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
syslogserver=$(getarg syslog.server -d syslog)
syslogfilters=$(getargs syslog.filter -d filter)
syslogtype=$(getarg syslog.type -d syslogtype)
[ -n "$syslogserver" ] && echo $syslogserver > /tmp/syslog.server
[ -n "$syslogfilters" ] && echo "$syslogfilters" > /tmp/syslog.filters
[ -n "$syslogtype" ] && echo "$syslogtype" > /tmp/syslog.type
98syslog/syslog-cleanup.sh 0000755 00000001005 15272355676 0011567 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# Just cleans up a previously started syslogd
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
if [ -f /tmp/syslog.server ]; then
read syslogtype < /tmp/syslog.type
if command -v "${syslogtype}-stop" >/dev/null; then
${syslogtype}-stop
else
warn "syslog-cleanup: Could not find script to stop syslog of type \"$syslogtype\". Syslog will not be stopped."
fi
fi 98syslog/rsyslog.conf 0000644 00000001464 15272355676 0010645 0 ustar 00 #rsyslog v3 config file
# if you experience problems, check
# http://www.rsyslog.com/troubleshoot for assistance
#### MODULES ####
$ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command)
$ModLoad imklog.so # provides kernel logging support (previously done by rklogd)
#$ModLoad immark.so # provides --MARK-- message capability
# Provides UDP syslog reception
#$ModLoad imudp.so
#$UDPServerRun 514
# Provides TCP syslog reception
#$ModLoad imtcp.so
#$InputTCPServerRun 514
#### GLOBAL DIRECTIVES ####
# Use default timestamp format
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
# File syncing capability is disabled by default. This feature is usually not required,
# not useful and an extreme performance hit
#$ActionFileEnableSync on
#### RULES ####
98syslog/module-setup.sh 0000755 00000002326 15272355676 0011254 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
# do not add this module by default
return 255
}
depends() {
return 0
}
install() {
local _i
local _installs
if type -P rsyslogd >/dev/null; then
_installs="rsyslogd"
inst_libdir_file rsyslog/lmnet.so rsyslog/imklog.so rsyslog/imuxsock.so
elif type -P syslogd >/dev/null; then
_installs="syslogd"
elif type -P syslog-ng >/dev/null; then
_installs="syslog-ng"
else
derror "Could not find any syslog binary although the syslogmodule" \
"is selected to be installed. Please check."
fi
if [ -n "$_installs" ]; then
inst_multiple cat $_installs
inst_hook cmdline 90 "$moddir/parse-syslog-opts.sh"
inst_hook pre-udev 61 "$moddir/syslog-genrules.sh"
inst_hook cleanup 99 "$moddir/syslog-cleanup.sh"
inst_simple "$moddir/rsyslogd-start.sh" /sbin/rsyslogd-start
inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop
mkdir -m 0755 -p ${initdir}/etc/templates
inst_simple "${moddir}/rsyslog.conf" /etc/templates
fi
dracut_need_initqueue
}
98syslog/syslog-genrules.sh 0000755 00000002170 15272355676 0011770 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# Creates the syslog udev rules to be triggered when interface becomes online.
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
detect_syslog() {
syslogtype=""
if [ -e /sbin/rsyslogd ]; then
syslogtype="rsyslogd"
elif [ -e /sbin/syslogd ]; then
syslogtype="syslogd"
elif [ /sbin/syslog-ng ]; then
syslogtype="syslog-ng"
else
warn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
fi
echo "$syslogtype"
[ -n "$syslogtype" ]
}
read syslogtype < /tmp/syslog.type
if [ -z "$syslogtype" ]; then
syslogtype=$(detect_syslog)
echo $syslogtype > /tmp/syslog.type
fi
if [ -e "/sbin/${syslogtype}-start" ]; then
printf 'ACTION=="online", SUBSYSTEM=="net", RUN+="/sbin/initqueue --onetime /sbin/'${syslogtype}'-start $env{INTERFACE}"\n' > /etc/udev/rules.d/70-syslog.rules
else
warn "syslog-genrules: Could not find binary to start syslog of type \"$syslogtype\". Syslog will not be started."
fi
98syslog/rsyslogd-start.sh 0000755 00000001530 15272355676 0011626 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# Triggered by udev and starts rsyslogd with bootparameters
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
rsyslog_config() {
local server=$1
shift
local syslog_template=$1
shift
local filters=$*
local filter=
cat $syslog_template
for filter in $filters; do
echo "${filter} @${server}"
done
# echo "*.* /tmp/syslog"
}
read server < /tmp/syslog.server
read filters < /tmp/syslog.filters
[ -z "$filters" ] && filters="kern.*"
read conf < /tmp/syslog.conf
[ -z "$conf" ] && conf="/etc/rsyslog.conf" && echo "$conf" > /tmp/syslog.conf
template=/etc/templates/rsyslog.conf
if [ -n "$server" ]; then
rsyslog_config "$server" "$template" "$filters" > $conf
rsyslogd -c3
fi
90bcache/module-setup.sh 0000755 00000001426 15272355676 0011131 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
if ! blkid -k | { while read line; do [[ $line == bcache ]] && exit 0; done; exit 1; } \
&& ! type -P probe-bcache >/dev/null; then
return 1
fi
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs = "bcache" ]] && return 0
done
return 255
}
return 0
}
depends() {
return 0
}
installkernel() {
instmods bcache
}
install() {
blkid -k | { while read line; do [[ $line == bcache ]] && exit 0; done; exit 1; } || inst_multiple -o probe-bcache
inst_multiple -o ${udevdir}/bcache-register
inst_rules 61-bcache.rules 69-bcache.rules
}
90dmraid/parse-dm.sh 0000755 00000001647 15272355676 0010256 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# nodmraid for anaconda / rc.sysinit compatibility
if ! getargbool 1 rd.dm -d -n rd_NO_DM || getarg "rd.dm=0" -d nodmraid; then
info "rd.dm=0: removing DM RAID activation"
udevproperty rd_NO_DM=1
fi
if ! command -v mdadm >/dev/null \
|| ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd \
|| ! getargbool 1 rd.md -d -n rd_NO_MD; then
info "rd.md.imsm=0: no MD RAID for imsm/isw raids"
udevproperty rd_NO_MDIMSM=1
fi
if ! command -v mdadm >/dev/null \
|| ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd \
|| ! getargbool 1 rd.md -d -n rd_NO_MD; then
info "rd.md.ddf=0: no MD RAID for SNIA ddf raids"
udevproperty rd_NO_MDDDF=1
fi
DM_RAIDS=$(getargs rd.dm.uuid -d rd_DM_UUID=)
if [ -z "$DM_RAIDS" ] && ! getargbool 0 rd.auto; then
udevproperty rd_NO_DM=1
fi
90dmraid/dmraid.sh 0000755 00000002603 15272355676 0007777 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
dev="$1"
devenc=$(str_replace "$1" '/' '\2f')
[ -e /tmp/dmraid.$devenc ] && exit 0
>/tmp/dmraid.$devenc
DM_RAIDS=$(getargs rd.dm.uuid -d rd_DM_UUID=)
if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
DM_CLEANUP="no"
# run dmraid if udev has settled
info "Scanning for dmraid devices $DM_RAIDS"
SETS=$(dmraid -c -s)
if [ "$SETS" = "no raid disks" -o "$SETS" = "no raid sets" ]; then
return
fi
info "Found dmraid sets:"
echo $SETS|vinfo
if [ -n "$DM_RAIDS" ]; then
# only activate specified DM RAIDS
for r in $DM_RAIDS; do
for s in $SETS; do
if [ "${s##$r}" != "$s" ]; then
info "Activating $s"
dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
[ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo
udevsettle
fi
done
done
else
# scan and activate all DM RAIDS
for s in $SETS; do
info "Activating $s"
dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
[ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo
done
fi
need_shutdown
fi
90dmraid/module-setup.sh 0000755 00000004106 15272355676 0011162 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _rootdev
# if we don't have dmraid installed on the host system, no point
# in trying to support it in the initramfs.
require_binaries dmraid || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
DEVPATH=$(get_devpath_block "$dev")
for holder in "$DEVPATH"/holders/*; do
[[ -e "$holder" ]] || continue
[[ -e "$holder/dm" ]] && return 0
break
done
done
return 255
}
return 0
}
depends() {
echo dm rootfs-block
return 0
}
cmdline() {
local _activated
declare -A _activated
for dev in "${!host_fs_types[@]}"; do
local holder DEVPATH DM_NAME majmin
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
DEVPATH=$(get_devpath_block "$dev")
for holder in "$DEVPATH"/holders/*; do
[[ -e "$holder" ]] || continue
dev="/dev/${holder##*/}"
DM_NAME="$(dmsetup info -c --noheadings -o name "$dev" 2>/dev/null)"
[[ ${DM_NAME} ]] && break
done
[[ ${DM_NAME} ]] || continue
if ! [[ ${_activated[${DM_NAME}]} ]]; then
printf "%s" " rd.dm.uuid=${DM_NAME}"
_activated["${DM_NAME}"]=1
fi
done
}
install() {
local _i
if [[ $hostonly_cmdline == "yes" ]]; then
cmdline >> "${initdir}/etc/cmdline.d/90dmraid.conf"
echo >> "${initdir}/etc/cmdline.d/90dmraid.conf"
fi
inst_multiple dmraid
inst_multiple -o kpartx
inst $(command -v partx) /sbin/partx
inst "$moddir/dmraid.sh" /sbin/dmraid_scan
inst_rules 64-md-raid.rules
inst_libdir_file "libdmraid-events*.so*"
inst_rules "$moddir/61-dmraid-imsm.rules"
#inst "$moddir/dmraid-cleanup.sh" /sbin/dmraid-cleanup
inst_hook pre-trigger 30 "$moddir/parse-dm.sh"
}
90dmraid/61-dmraid-imsm.rules 0000644 00000001732 15272355676 0011705 0 ustar 00 # This file causes block devices with RAID (dmraid) signatures to
# automatically cause dmraid_scan to be run.
# See udev(8) for syntax
SUBSYSTEM!="block", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="?*", GOTO="dm_end"
ENV{ID_FS_TYPE}=="linux_raid_member", GOTO="dm_end"
ENV{ID_FS_TYPE}!="*_raid_member", , GOTO="dm_end"
ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}!="?*", GOTO="dm_end"
ENV{ID_FS_TYPE}=="ddf_raid_member", ENV{rd_NO_MDDDF}!="?*", GOTO="dm_end"
ENV{rd_NO_DM}=="?*", GOTO="dm_end"
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end"
PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
GOTO="dm_end"
ENV{DEVTYPE}!="partition", \
RUN+="/sbin/partx -d --nr 1-1024 $env{DEVNAME}"
RUN+="/sbin/initqueue --onetime --unique --settled /sbin/dmraid_scan $env{DEVNAME}"
LABEL="dm_end"
90kernel-modules/insmodpost.sh 0000755 00000000457 15272355676 0012431 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
for modlist in $(getargs rd.driver.post -d rdinsmodpost=); do
(
IFS=,
for m in $modlist; do
modprobe $m
done
)
done
90kernel-modules/parse-kernel.sh 0000755 00000002007 15272355676 0012613 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
_modprobe_d=/etc/modprobe.d
if [ -d /usr/lib/modprobe.d ] ; then
_modprobe_d=/usr/lib/modprobe.d
elif [ -d /lib/modprobe.d ] ; then
_modprobe_d=/lib/modprobe.d
elif [ ! -d $_modprobe_d ] ; then
mkdir -p $_modprobe_d
fi
for i in $(getargs rd.driver.pre -d rdloaddriver=); do
(
IFS=,
for p in $i; do
modprobe $p 2>&1 | vinfo
done
)
done
[ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d
for i in $(getargs rd.driver.blacklist -d rdblacklist=); do
(
IFS=,
for p in $i; do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
done
)
done
for p in $(getargs rd.driver.post -d rdinsmodpost=); do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
_do_insmodpost=1
done
[ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh
unset _do_insmodpost _modprobe_d
90kernel-modules/module-setup.sh 0000755 00000007253 15272355676 0012656 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
installkernel() {
if [[ -z $drivers ]]; then
block_module_filter() {
local _blockfuncs='ahci_platform_get_resources|ata_scsi_ioctl|scsi_add_host|blk_cleanup_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device|usb_stor_disconnect|mmc_add_host|sdhci_add_host'
# subfunctions inherit following FDs
local _merge=8 _side2=9
function bmf1() {
local _f
while read _f; do case "$_f" in
*.ko) [[ $(< $_f) =~ $_blockfuncs ]] && echo "$_f" ;;
*.ko.gz) [[ $(gzip -dc <$_f) =~ $_blockfuncs ]] && echo "$_f" ;;
*.ko.xz) [[ $(xz -dc <$_f) =~ $_blockfuncs ]] && echo "$_f" ;;
esac
done
return 0
}
function rotor() {
local _f1 _f2
while read _f1; do
echo "$_f1"
if read _f2; then
echo "$_f2" 1>&${_side2}
fi
done | bmf1 1>&${_merge}
return 0
}
# Use two parallel streams to filter alternating modules.
set +x
eval "( ( rotor ) ${_side2}>&1 | bmf1 ) ${_merge}>&1"
[[ $debug ]] && set -x
return 0
}
hostonly='' instmods \
sr_mod sd_mod scsi_dh ata_piix hid_generic unix \
ehci-hcd ehci-pci ehci-platform \
ohci-hcd ohci-pci \
uhci-hcd \
xhci-hcd xhci-pci xhci-plat-hcd
instmods yenta_socket scsi_dh_rdac scsi_dh_emc scsi_dh_alua \
atkbd i8042 usbhid firewire-ohci pcmcia hv-vmbus \
atkbd i8042 usbhid firewire-ohci pcmcia usb_storage \
nvme hv-vmbus sdhci_acpi nfit
instmods \
"=drivers/hid" \
"=drivers/input/serio" \
"=drivers/input/keyboard"
if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]; then
# arm/aarch64 specific modules
hostonly='' instmods \
connector-hdmi connector-dvi encoder-tfp410 \
encoder-tpd12s015 i2c-tegra gpio-regulator \
as3722-regulator orion-ehci ehci-tegra
instmods \
"=drivers/dma" \
"=drivers/i2c/busses" \
"=drivers/regulator" \
"=drivers/rtc" \
"=drivers/usb/host" \
"=drivers/usb/phy" \
"=drivers/scsi/hisi_sas" \
${NULL}
fi
# install virtual machine support
instmods virtio virtio_blk virtio_ring virtio_pci virtio_scsi \
"=drivers/pcmcia" =ide "=drivers/usb/storage"
find_kernel_modules | block_module_filter | instmods
# if not on hostonly mode, install all known filesystems,
# if the required list is not set via the filesystems variable
if ! [[ $hostonly ]]; then
if [[ -z $filesystems ]]; then
silent_omit_drivers="kernel/fs/nfs|kernel/fs/nfsd|kernel/fs/lockd" \
instmods '=fs'
fi
else
for i in "${host_fs_types[@]}"; do
hostonly='' instmods $i
done
fi
fi
:
}
install() {
inst_multiple -o /lib/modprobe.d/*.conf
[[ $hostonly ]] && inst_multiple -o /etc/modprobe.d/*.conf /etc/modprobe.conf
if ! dracut_module_included "systemd"; then
inst_hook cmdline 01 "$moddir/parse-kernel.sh"
fi
inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
}
99fs-lib/module-setup.sh 0000755 00000003212 15272355676 0011104 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 0
}
depends() {
return 0
}
echo_fs_helper() {
local dev=$1 fs=$2
case "$fs" in
xfs)
echo -n " xfs_db xfs_repair xfs_check xfs_metadump"
;;
ext?)
echo -n " e2fsck "
;;
jfs)
echo -n " jfs_fsck "
;;
reiserfs)
echo -n " reiserfsck "
;;
btrfs)
echo -n " btrfsck "
;;
esac
echo -n " fsck.$fs "
return 0
}
include_fs_helper_modules() {
local dev=$1 fs=$2
case "$fs" in
xfs|btrfs)
instmods crc32c
;;
esac
}
installkernel() {
# xfs and btrfs needs crc32c...
if [[ $hostonly ]]; then
for_each_host_dev_fs include_fs_helper_modules
:
else
instmods crc32c
fi
}
install() {
local _helpers
inst "$moddir/fs-lib.sh" "/lib/fs-lib.sh"
> ${initdir}/etc/fstab.empty
[[ "$nofscks" = "yes" ]] && return
if [[ "$fscks" = "${fscks#*[^ ]*}" ]]; then
_helpers="\
umount mount /sbin/fsck*
xfs_db xfs_check xfs_repair xfs_metadump
e2fsck jfs_fsck reiserfsck btrfsck
"
if [[ $hostonly ]]; then
_helpers="umount mount "
_helpers+=$(for_each_host_dev_fs echo_fs_helper)
fi
else
_helpers="$fscks"
fi
if [[ "$_helpers" == *e2fsck* ]] && [ -e /etc/e2fsck.conf ]; then
inst_simple /etc/e2fsck.conf
fi
inst_multiple -o $_helpers fsck
}
99fs-lib/fs-lib.sh 0000755 00000014313 15272355676 0007641 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
fsck_ask_reboot() {
info "note - fsck suggests reboot, if you"
info "leave shell, booting will continue normally"
action_on_fail -n "(reboot ?)"
}
fsck_ask_err() {
warn "*** An error occurred during the file system check."
warn "*** Dropping you to a shell; the system will try"
warn "*** to mount the filesystem(s), when you leave the shell."
action_on_fail -n "(Repair filesystem)"
}
# inherits: _ret _drv _out
fsck_tail() {
[ $_ret -gt 0 ] && warn "$_drv returned with $_ret"
if [ $_ret -ge 4 ]; then
[ -n "$_out" ] && echo "$_out"|vwarn
fsck_ask_err
else
[ -n "$_out" ] && echo "$_out"|vinfo
[ $_ret -ge 2 ] && fsck_ask_reboot
fi
}
# note: this function sets _drv of the caller
fsck_able() {
case "$1" in
xfs)
# {
# type xfs_db &&
# type xfs_repair &&
# type xfs_check &&
# type mount &&
# type umount
# } >/dev/null 2>&1 &&
# _drv="_drv=none fsck_drv_xfs" &&
# return 0
return 1
;;
ext?)
type e2fsck >/dev/null 2>&1 &&
_drv="_drv=e2fsck fsck_drv_com" &&
return 0
;;
jfs)
type jfs_fsck >/dev/null 2>&1 &&
_drv="_drv=jfs_fsck fsck_drv_com" &&
return 0
;;
reiserfs)
type reiserfsck >/dev/null 2>&1 &&
_drv="_drv=reiserfsck fsck_drv_com" &&
return 0
;;
btrfs)
# type btrfsck >/dev/null 2>&1 &&
# _drv="_drv=none fsck_drv_btrfs" &&
# return 0
return 1
;;
nfs*)
# nfs can be a nop, returning success
_drv="_drv=none :" &&
return 0
;;
*)
type fsck >/dev/null 2>&1 &&
_drv="_drv=fsck fsck_drv_std" &&
return 0
;;
esac
return 1
}
# note: all drivers inherit: _drv _fop _dev
fsck_drv_xfs() {
# xfs fsck is not necessary... Either it mounts or not
return 0
}
fsck_drv_btrfs() {
# btrfs fsck is not necessary... Either it mounts or not
return 0
}
# common code for checkers that follow usual subset of options and return codes
fsck_drv_com() {
local _ret
local _out
if ! strstr "$_fop" "-[ynap]"; then
_fop="-a ${_fop}"
fi
info "issuing $_drv $_fop $_dev"
# we enforce non-interactive run, so $() is fine
_out=$($_drv $_fop "$_dev")
_ret=$?
fsck_tail
return $_ret
}
# code for generic fsck, if the filesystem checked is "unknown" to us
fsck_drv_std() {
local _ret
local _out
unset _out
info "issuing fsck $_fop $_dev"
# note, we don't enforce -a here, thus fsck is being run (in theory)
# interactively; otherwise some tool might complain about lack of terminal
# (and using -a might not be safe)
fsck $_fop "$_dev" >/dev/console 2>&1
_ret=$?
fsck_tail
return $_ret
}
# checks single filesystem, relying on specific "driver"; we don't rely on
# automatic checking based on fstab, so empty one is passed;
# takes 4 arguments - device, filesystem, filesystem options, additional fsck options;
# first 2 arguments are mandatory (fs may be auto or "")
# returns 255 if filesystem wasn't checked at all (e.g. due to lack of
# necessary tools or insufficient options)
fsck_single() {
local FSTAB_FILE=/etc/fstab.empty
local _dev="$1"
local _fs="${2:-auto}"
local _fsopts="$3"
local _fop="$4"
local _drv
[ $# -lt 2 ] && return 255
# if UUID= marks more than one device, take only the first one
[ -e "$_dev" ] || _dev=$(devnames "$_dev"| while read line; do if [ -n "$line" ]; then echo $line; break;fi;done)
[ -e "$_dev" ] || return 255
_fs=$(det_fs "$_dev" "$_fs")
fsck_able "$_fs" || return 255
info "Checking $_fs: $_dev"
export FSTAB_FILE
eval "$_drv"
return $?
}
# takes list of filesystems to check in parallel; we don't rely on automatic
# checking based on fstab, so empty one is passed
fsck_batch() {
local FSTAB_FILE=/etc/fstab.empty
local _drv=fsck
local _dev
local _ret
local _out
[ $# -eq 0 ] || ! type fsck >/dev/null 2>&1 && return 255
info "Checking filesystems (fsck -M -T -a):"
for _dev in "$@"; do
info " $_dev"
done
export FSTAB_FILE
_out="$(fsck -M -T "$@" -- -a)"
_ret=$?
fsck_tail
return $_ret
}
# verify supplied filesystem type:
# if user provided the fs and we couldn't find it, assume user is right
# if we found the fs, assume we're right
det_fs() {
local _dev="$1"
local _orig="${2:-auto}"
local _fs
_fs=$(udevadm info --query=env --name="$_dev" | \
while read line; do
if str_starts $line "ID_FS_TYPE="; then
echo ${line#ID_FS_TYPE=}
break
fi
done)
_fs=${_fs:-auto}
if [ "$_fs" = "auto" ]; then
_fs="$_orig"
fi
echo "$_fs"
}
write_fs_tab() {
local _o
local _rw
local _root
local _rootfstype
local _rootflags
local _fspassno
_fspassno="0"
_root="$1"
_rootfstype="$2"
_rootflags="$3"
[ -z "$_rootfstype" ] && _rootfstype=$(getarg rootfstype=)
[ -z "$_rootflags" ] && _rootflags=$(getarg rootflags=)
[ -z "$_rootfstype" ] && _rootfstype="auto"
if [ -z "$_rootflags" ]; then
_rootflags="ro,x-initrd.mount"
else
_rootflags="ro,$_rootflags,x-initrd.mount"
fi
_rw=0
CMDLINE=$(getcmdline)
for _o in $CMDLINE; do
case $_o in
rw)
_rw=1;;
ro)
_rw=0;;
esac
done
if [ "$_rw" = "1" ]; then
_rootflags="$_rootflags,rw"
if ! getargbool 0 rd.skipfsck; then
_fspassno="1"
fi
fi
echo "$_root /sysroot $_rootfstype $_rootflags $_fspassno 0" >> /etc/fstab
if type systemctl >/dev/null 2>/dev/null; then
systemctl daemon-reload
systemctl --no-block start initrd-root-fs.target
fi
}
90qemu/module-setup.sh 0000755 00000001643 15272355676 0010674 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm 2>/dev/null)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Red Hat" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
}
installkernel() {
# qemu specific modules
hostonly='' instmods \
ata_piix ata_generic pata_acpi cdrom sr_mod ahci \
virtio_blk virtio virtio_ring virtio_pci \
virtio_scsi virtio_console spapr-vscsi ibmvscsi
}
03modsign/module-setup.sh 0000755 00000001426 15272355677 0011357 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Licensed under the GPLv2
#
# Copyright 2013 Red Hat, Inc.
# Peter Jones <pjones@redhat.com>
check() {
require_binaries keyctl || return 1
# do not include module in hostonly mode,
# if no keys are present
if [[ $hostonly ]]; then
x=$(echo /lib/modules/keys/*)
[[ "${x}" = "/lib/modules/keys/*" ]] && return 255
fi
return 0
}
depends() {
return 0
}
install() {
inst_dir /lib/modules/keys
inst_binary /usr/bin/keyctl
inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"
for x in /lib/modules/keys/* ; do
[[ "${x}" = "/lib/modules/keys/*" ]] && break
inst_simple "${x}"
done
}
03modsign/load-modsign-keys.sh 0000755 00000000530 15272355677 0012255 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Licensed under the GPLv2
#
# Copyright 2013 Red Hat, Inc.
# Peter Jones <pjones@redhat.com>
for x in /lib/modules/keys/* ; do
[ "${x}" = "/lib/modules/keys/*" ] && break
keyctl padd asymmetric "" @s < ${x}
done
98usrmount/mount-usr.sh 0000755 00000007160 15272355677 0011160 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type info >/dev/null 2>&1 || . /lib/dracut-lib.sh
type fsck_single >/dev/null 2>&1 || . /lib/fs-lib.sh
filtersubvol() {
local _oldifs
_oldifs="$IFS"
IFS=","
set $*
IFS="$_oldifs"
while [ $# -gt 0 ]; do
case $1 in
subvol\=*) :;;
*) printf '%s' "${1}," ;;
esac
shift
done
}
fsck_usr()
{
local _dev=$1
local _fs=$2
local _fsopts=$3
local _fsckoptions
if [ -f "$NEWROOT"/fsckoptions ]; then
_fsckoptions=$(cat "$NEWROOT"/fsckoptions)
fi
if [ -f "$NEWROOT"/forcefsck ] || getargbool 0 forcefsck ; then
_fsckoptions="-f $_fsckoptions"
elif [ -f "$NEWROOT"/.autofsck ]; then
[ -f "$NEWROOT"/etc/sysconfig/autofsck ] && . "$NEWROOT"/etc/sysconfig/autofsck
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
fi
if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
warn "*** Warning -- the system did not shut down cleanly. "
warn "*** Dropping you to a shell; the system will continue"
warn "*** when you leave the shell."
action_on_fail
fi
_fsckoptions="$AUTOFSCK_OPT $_fsckoptions"
fi
fsck_single "$_dev" "$_fs" "$_fsopts" "$_fsckoptions"
}
mount_usr()
{
local _dev _mp _fs _opts _rest _usr_found _ret _freq _passno
# check, if we have to mount the /usr filesystem
while read _dev _mp _fs _opts _freq _passno; do
[ "${_dev%%#*}" != "$_dev" ] && continue
if [ "$_mp" = "/usr" ]; then
case "$_dev" in
LABEL=*)
_dev="$(echo $_dev | sed 's,/,\\x2f,g')"
_dev="/dev/disk/by-label/${_dev#LABEL=}"
;;
UUID=*)
_dev="${_dev#block:}"
_dev="/dev/disk/by-uuid/${_dev#UUID=}"
;;
esac
if strstr "$_opts" "subvol=" && \
[ "${root#block:}" -ef $_dev ] && \
[ -n "$rflags" ]; then
# for btrfs subvolumes we have to mount /usr with the same rflags
rflags=$(filtersubvol "$rflags")
rflags=${rflags%%,}
_opts="${_opts:+${_opts},}${rflags}"
elif getargbool 0 ro; then
# if "ro" is specified, we want /usr to be mounted read-only
_opts="${_opts:+${_opts},}ro"
elif getargbool 0 rw; then
# if "rw" is specified, we want /usr to be mounted read-write
_opts="${_opts:+${_opts},}rw"
fi
echo "$_dev ${NEWROOT}${_mp} $_fs ${_opts} $_freq $_passno"
_usr_found="1"
break
fi
done < "$NEWROOT/etc/fstab" >> /etc/fstab
if [ "$_usr_found" != "" ]; then
# we have to mount /usr
_fsck_ret=0
if ! getargbool 0 rd.skipfsck; then
if [ "0" != "${_passno:-0}" ]; then
fsck_usr "$_dev" "$_fs" "$_opts"
_fsck_ret=$?
[ $_fsck_ret -ne 255 ] && echo $_fsck_ret >/run/initramfs/usr-fsck
fi
fi
info "Mounting /usr with -o $_opts"
mount "$NEWROOT/usr" 2>&1 | vinfo
if ! ismounted "$NEWROOT/usr"; then
warn "Mounting /usr to $NEWROOT/usr failed"
warn "*** Dropping you to a shell; the system will continue"
warn "*** when you leave the shell."
action_on_fail
fi
fi
}
if [ -f "$NEWROOT/etc/fstab" ]; then
mount_usr
fi
98usrmount/module-setup.sh 0000755 00000000704 15272355677 0011627 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _init
[[ $mount_needs ]] && return 1
_init=$(readlink -f /sbin/init)
[[ "$_init" == "${_init##/usr}" ]] && return 255
return 0
}
depends() {
echo 'fs-lib'
}
install() {
if ! dracut_module_included "systemd"; then
inst_hook pre-pivot 50 "$moddir/mount-usr.sh"
fi
:
}
98systemd/dracut-mount.service 0000644 00000002002 15272355677 0012436 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=dracut mount hook
Documentation=man:dracut-mount.service(8)
After=initrd-root-fs.target initrd-parse-etc.service
After=dracut-initqueue.service dracut-pre-mount.service
ConditionPathExists=/etc/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/mount
ConditionKernelCommandLine=|rd.break=mount
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-mount
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/rescue.service 0000644 00000001555 15272355677 0011316 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=Rescue Shell
DefaultDependencies=no
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStartPre=-/bin/plymouth quit
ExecStart=-/bin/sh -i -l
ExecStopPost=-/bin/rm -f -- /.console_lock
ExecStopPost=-/usr/bin/systemctl --fail --no-block default
Type=idle
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-tmpfiles.conf 0000644 00000000207 15272355677 0012411 0 ustar 00 d /run/initramfs 0755 root root -
d /run/initramfs/log 0755 root root -
L /var/log - - - - ../run/initramfs/log
98systemd/dracut-cmdline-ask.sh 0000755 00000000646 15272355677 0012454 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
sleep 0.5
echo
sleep 0.5
echo
sleep 0.5
echo
echo
echo
echo
echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
while read -e -p "> " line; do
[[ "$line" == "." ]] && break
[[ "$line" ]] && printf -- "%s\n" "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
done
exit 0
98systemd/emergency.service 0000644 00000001724 15272355677 0012004 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=Emergency Shell
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
ConditionPathExists=!/lib/dracut/no-emergency-shell
Conflicts=shutdown.target
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=-/bin/dracut-emergency
ExecStopPost=-/usr/bin/systemctl --no-block isolate default.target
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
TimeoutStartSec=0
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-pre-udev.service.8 0000644 00000002777 15272355677 0013214 0 ustar 00 '\" t
.\" Title: dracut-pre-udev.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\" Date: 09/12/2013
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-UDEV\&." "8" "09/12/2013" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-udev.service \- runs the dracut hooks before udevd is started
.SH "SYNOPSIS"
.sp
dracut\-pre\-udev\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before udevd is started in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
98systemd/dracut-mount.service.8.asc 0000644 00000000640 15272355677 0013357 0 ustar 00 DRACUT-MOUNT.SERVICE(8)
=======================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-mount.service - runs the dracut hooks after /sysroot is mounted
SYNOPSIS
--------
dracut-mount.service
DESCRIPTION
-----------
This service runs all dracut hooks after the real root is mounted on /sysroot.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
98systemd/dracut-pre-pivot.service.8 0000644 00000003003 15272355677 0013371 0 ustar 00 '\" t
.\" Title: dracut-pre-pivot.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\" Date: 09/12/2013
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-PIVOT\&" "8" "09/12/2013" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-pivot.service \- runs the dracut hooks before switching root
.SH "SYNOPSIS"
.sp
dracut\-pre\-pivot\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before the system switched to the real root\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
98systemd/dracut-cmdline.sh 0000755 00000005232 15272355677 0011674 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
[ -d /run/initramfs ] || mkdir -p -m 0755 /run/initramfs
[ -d /run/lock ] || mkdir -p -m 0755 /run/lock
[ -d /run/log ] || mkdir -p -m 0755 /run/log
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -f /etc/initrd-release ] && . /etc/initrd-release
[ -n "$VERSION" ] && info "dracut-$VERSION"
info "Using kernel command line parameters:" $(getcmdline)
getargbool 0 rd.udev.log-priority=info -d rd.udev.info -d -n -y rdudevinfo && echo 'udev_log="info"' >> /etc/udev/udev.conf
getargbool 0 rd.udev.log-priority=debug -d rd.udev.debug -d -n -y rdudevdebug && echo 'udev_log="debug"' >> /etc/udev/udev.conf
source_conf /etc/conf.d
# Get the "root=" parameter from the kernel command line, but differentiate
# between the case where it was set to the empty string and the case where it
# wasn't specified at all.
if ! root="$(getarg root=)"; then
root_unset='UNSET'
fi
rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"
fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
fstype="auto"
fi
export root
export rflags
export fstype
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab' '4+:komem'
# run scriptlets to parse the command line
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -f /lib/dracut/parse-resume.sh ] && . /lib/dracut/parse-resume.sh
case "${root}${root_unset}" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/*)
root="block:${root}"
rootok=1 ;;
UNSET|gpt-auto)
# systemd's gpt-auto-generator handles this case.
rootok=1 ;;
esac
[ -z "${root}${root_unset}" ] && die "Empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
[ "$root" = "UNSET" ] && unset root
export root rflags fstype netroot NEWROOT
export -p > /dracut-state.sh
exit 0
98systemd/dracut-pre-mount.service 0000644 00000002042 15272355677 0013226 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=dracut pre-mount hook
Documentation=man:dracut-pre-mount.service(8)
DefaultDependencies=no
Before=initrd-root-fs.target sysroot.mount
After=dracut-initqueue.service
After=cryptsetup.target
ConditionPathExists=/etc/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-mount
ConditionKernelCommandLine=|rd.break=pre-mount
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-mount
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-pre-pivot.sh 0000755 00000002227 15272355677 0012207 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-pivot' 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
cleanup_trace_mem
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup
getarg rd.break -d rdbreak && emergency_shell -n switch_root "Break before switch_root"
# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root
[ -h /dev/nfs ] && rm -f -- /dev/nfs
udevadm settle
cnt=0
while ! udevadm settle --timeout=0; do
info "udev still not settled. Waiting."
udevadm settle
cnt=$(($cnt+1))
[ $cnt -gt 10 ] && break
done
exit 0
98systemd/dracut-initqueue.service.8 0000644 00000003014 15272355677 0013456 0 ustar 00 '\" t
.\" Title: dracut-initqueue.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\" Date: 09/12/2013
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-INITQUEUE\&." "8" "09/12/2013" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-initqueue.service \- runs the dracut main loop to find the real root
.SH "SYNOPSIS"
.sp
dracut\-initqueue\&.service
.SH "DESCRIPTION"
.sp
This service runs all the main loop of dracut in the initramfs to find the real root\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
98systemd/dracut-emergency.sh 0000755 00000002476 15272355677 0012246 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
type plymouth >/dev/null 2>&1 && plymouth quit
export _rdshell_name="dracut" action="Boot" hook="emergency"
source_hook "$hook"
_emergency_action=$(getarg rd.emergency)
if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then
echo
rdsosreport
echo
echo
echo 'Entering emergency mode. Exit the shell to continue.'
echo 'Type "journalctl" to view system logs.'
echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot'
echo 'after mounting them and attach it to a bug report.'
echo
echo
[ -f /etc/profile ] && . /etc/profile
[ -z "$PS1" ] && export PS1="$_name:\${PWD}# "
exec sh -i -l
else
warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line."
[ -z "$_emergency_action" ] && _emergency_action=halt
fi
/bin/rm -f -- /.console_lock
case "$_emergency_action" in
reboot)
reboot || exit 1;;
poweroff)
poweroff || exit 1;;
halt)
halt || exit 1;;
esac
exit 0
98systemd/dracut-shutdown.service.8 0000644 00000007027 15272355677 0013331 0 ustar 00 '\" t
.\" Title: dracut-shutdown.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\" Date: 09/12/2013
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-SHUTDOWN\&.S" "8" "09/12/2013" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-shutdown.service \- unpack the initramfs to /run/initramfs
.SH "SYNOPSIS"
.sp
dracut\-shutdown\&.service
.SH "DESCRIPTION"
.sp
This service unpacks the initramfs image to /run/initramfs\&. systemd pivots into /run/initramfs at shutdown, so the root filesytem can be safely unmounted\&.
.sp
The following steps are executed during a shutdown:
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd switches to the shutdown\&.target
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd starts /lib/systemd/system/shutdown\&.target\&.wants/dracut\-shutdown\&.service
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
dracut\-shutdown\&.service executes /usr/lib/dracut/dracut\-initramfs\-restore which unpacks the initramfs to /run/initramfs
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd finishes shutdown\&.target
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd kills all processes
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd tries to unmount everything and mounts the remaining read\-only
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd checks, if there is a /run/initramfs/shutdown executable
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
if yes, it does a pivot_root to /run/initramfs and executes \&./shutdown\&. The old root is then mounted on /oldroot\&. /usr/lib/dracut/modules\&.d/99shutdown/shutdown\&.sh is the shutdown executable\&.
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
.RE
.sp
This ensures, that all devices are disassembled and unmounted cleanly\&.
.sp
To debug the shutdown process, you can get a shell in the shutdown procedure by injecting "rd\&.break=pre\-shutdown rd\&.shell" or "rd\&.break=shutdown rd\&.shell"\&.
.sp
.if n \{\
.RS 4
.\}
.nf
# mkdir \-p /run/initramfs/etc/cmdline\&.d
# echo "rd\&.break=pre\-shutdown rd\&.shell" > /run/initramfs/etc/cmdline\&.d/debug\&.conf
# touch /run/initramfs/\&.need_shutdown
.fi
.if n \{\
.RE
.\}
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\fR(8)
98systemd/dracut-pre-trigger.service.8.asc 0000644 00000000670 15272355677 0014447 0 ustar 00 DRACUT-PRE-TRIGGER.SERVICE(8)
=============================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-trigger.service - runs the dracut hooks before udevd is triggered
SYNOPSIS
--------
dracut-pre-trigger.service
DESCRIPTION
-----------
This service runs all dracut hooks before udevd is triggered in the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
98systemd/dracut-pre-pivot.service.8.asc 0000644 00000000655 15272355677 0014150 0 ustar 00 DRACUT-PRE-PIVOT.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-pivot.service - runs the dracut hooks before switching root
SYNOPSIS
--------
dracut-pre-pivot.service
DESCRIPTION
-----------
This service runs all dracut hooks before the system switched to the real root.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
98systemd/dracut-pre-trigger.service.8 0000644 00000003014 15272355677 0013675 0 ustar 00 '\" t
.\" Title: dracut-pre-trigger.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\" Date: 09/12/2013
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-TRIGGER" "8" "09/12/2013" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-trigger.service \- runs the dracut hooks before udevd is triggered
.SH "SYNOPSIS"
.sp
dracut\-pre\-trigger\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before udevd is triggered in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
98systemd/dracut-pre-udev.service.8.asc 0000644 00000000650 15272355677 0013745 0 ustar 00 DRACUT-PRE-UDEV.SERVICE(8)
==========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-udev.service - runs the dracut hooks before udevd is started
SYNOPSIS
--------
dracut-pre-udev.service
DESCRIPTION
-----------
This service runs all dracut hooks before udevd is started in the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
98systemd/dracut-initqueue.sh 0000755 00000004257 15272355677 0012277 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"
RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-180}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do
check_finished && break
udevadm settle --exit-if-exists=$hookdir/initqueue/work
check_finished && break
if [ -f $hookdir/initqueue/work ]; then
rm -f -- "$hookdir/initqueue/work"
fi
for job in $hookdir/initqueue/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
udevadm settle --timeout=0 >/dev/null 2>&1 || continue
for job in $hookdir/initqueue/settled/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
udevadm settle --timeout=0 >/dev/null 2>&1 || continue
# no more udev jobs and queues empty.
sleep 0.5
for i in /run/systemd/ask-password/ask.*; do
[ -e "$i" ] && continue 2
done
if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
warn "dracut-initqueue timeout - starting timeout scripts"
for job in $hookdir/initqueue/timeout/*.sh; do
[ -e "$job" ] || break
job=$job . $job
udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
[ -f $hookdir/initqueue/work ] && main_loop=0
done
fi
main_loop=$(($main_loop+1))
if [ $main_loop -gt $RDRETRY ]; then
if ! [ -f /sysroot/etc/fstab ] || ! [ -e /sysroot/sbin/init ] ; then
action_on_fail "Could not boot." && break
fi
warn "Not all disks have been found."
warn "You might want to regenerate your initramfs."
break
fi
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY
export -p > /dracut-state.sh
exit 0
98systemd/dracut-shutdown.service.8.asc 0000644 00000003231 15272355677 0014067 0 ustar 00 DRACUT-SHUTDOWN.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-shutdown.service - unpack the initramfs to /run/initramfs
SYNOPSIS
--------
dracut-shutdown.service
DESCRIPTION
-----------
This service unpacks the initramfs image to /run/initramfs.
systemd pivots into /run/initramfs at shutdown, so the root filesytem
can be safely unmounted.
The following steps are executed during a shutdown:
* systemd switches to the shutdown.target
* systemd starts /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
* dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore which unpacks the initramfs to /run/initramfs
* systemd finishes shutdown.target
* systemd kills all processes
* systemd tries to unmount everything and mounts the remaining read-only
* systemd checks, if there is a /run/initramfs/shutdown executable
* if yes, it does a pivot_root to /run/initramfs and executes ./shutdown. The old root is then mounted on /oldroot. /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
* shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
This ensures, that all devices are disassembled and unmounted cleanly.
To debug the shutdown process, you can get a shell in the shutdown procedure
by injecting "rd.break=pre-shutdown rd.shell" or "rd.break=shutdown rd.shell".
----
# mkdir -p /run/initramfs/etc/cmdline.d
# echo "rd.break=pre-shutdown rd.shell" > /run/initramfs/etc/cmdline.d/debug.conf
# touch /run/initramfs/.need_shutdown
----
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut*(8)
98systemd/dracut-emergency.service 0000644 00000001716 15272355677 0013265 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=Dracut Emergency Shell
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
ConditionPathExists=!/lib/dracut/no-emergency-shell
Conflicts=shutdown.target emergency.target
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=/bin/dracut-emergency
ExecStopPost=-/bin/rm -f -- /.console_lock
Type=oneshot
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-mount.service.8 0000644 00000002771 15272355677 0012621 0 ustar 00 '\" t
.\" Title: dracut-mount.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\" Date: 09/12/2013
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-MOUNT\&.SERV" "8" "09/12/2013" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-mount.service \- runs the dracut hooks after /sysroot is mounted
.SH "SYNOPSIS"
.sp
dracut\-mount\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks after the real root is mounted on /sysroot\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
98systemd/module-setup.sh 0000755 00000023761 15272355677 0011433 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
[[ $mount_needs ]] && return 1
if require_binaries $systemdutildir/systemd; then
SYSTEMD_VERSION=$($systemdutildir/systemd --version | { read a b a; echo $b; })
(( $SYSTEMD_VERSION >= 198 )) && return 0
return 255
fi
return 1
}
depends() {
return 0
}
installkernel() {
instmods autofs4 ipv6
instmods -s efivarfs
}
ug_check_and_add() {
local name="$1"
local file="$2"
if egrep -q "^$name:" "$file" 2>/dev/null \
&& ! egrep -q "^$name:" "$initdir$file" 2>/dev/null; then
egrep "^$name:" "$file" 2>/dev/null >> "$initdir$file"
fi
}
install() {
local _mods
if [[ "$prefix" == /run/* ]]; then
dfatal "systemd does not work with a prefix, which contains \"/run\"!!"
exit 1
fi
ug_check_and_add "wheel" "/etc/passwd"
ug_check_and_add "wheel" "/etc/group"
ug_check_and_add "adm" "/etc/passwd"
ug_check_and_add "adm" "/etc/group"
inst_multiple -o \
$systemdutildir/systemd \
$systemdutildir/systemd-cgroups-agent \
$systemdutildir/systemd-shutdown \
$systemdutildir/systemd-reply-password \
$systemdutildir/systemd-fsck \
$systemdutildir/systemd-udevd \
$systemdutildir/systemd-journald \
$systemdutildir/systemd-sysctl \
$systemdutildir/systemd-modules-load \
$systemdutildir/systemd-vconsole-setup \
$systemdutildir/system-generators/systemd-fstab-generator \
\
$systemdsystemunitdir/cryptsetup.target \
$systemdsystemunitdir/emergency.target \
$systemdsystemunitdir/sysinit.target \
$systemdsystemunitdir/basic.target \
$systemdsystemunitdir/halt.target \
$systemdsystemunitdir/kexec.target \
$systemdsystemunitdir/initrd.target \
$systemdsystemunitdir/initrd-fs.target \
$systemdsystemunitdir/initrd-root-fs.target \
$systemdsystemunitdir/local-fs.target \
$systemdsystemunitdir/local-fs-pre.target \
$systemdsystemunitdir/remote-fs.target \
$systemdsystemunitdir/remote-fs-pre.target \
$systemdsystemunitdir/network.target \
$systemdsystemunitdir/nss-lookup.target \
$systemdsystemunitdir/nss-user-lookup.target \
$systemdsystemunitdir/poweroff.target \
$systemdsystemunitdir/reboot.target \
$systemdsystemunitdir/rescue.target \
$systemdsystemunitdir/rpcbind.target \
$systemdsystemunitdir/shutdown.target \
$systemdsystemunitdir/final.target \
$systemdsystemunitdir/sigpwr.target \
$systemdsystemunitdir/sockets.target \
$systemdsystemunitdir/swap.target \
$systemdsystemunitdir/timers.target \
$systemdsystemunitdir/paths.target \
$systemdsystemunitdir/umount.target \
\
$systemdsystemunitdir/sys-kernel-config.mount \
\
$systemdsystemunitdir/kmod-static-nodes.service \
$systemdsystemunitdir/systemd-tmpfiles-setup-dev.service \
$systemdsystemunitdir/systemd-ask-password-console.path \
$systemdsystemunitdir/systemd-udevd-control.socket \
$systemdsystemunitdir/systemd-udevd-kernel.socket \
$systemdsystemunitdir/systemd-ask-password-plymouth.path \
$systemdsystemunitdir/systemd-journald.socket \
$systemdsystemunitdir/systemd-ask-password-console.service \
$systemdsystemunitdir/systemd-modules-load.service \
$systemdsystemunitdir/systemd-halt.service \
$systemdsystemunitdir/systemd-poweroff.service \
$systemdsystemunitdir/systemd-reboot.service \
$systemdsystemunitdir/systemd-kexec.service \
$systemdsystemunitdir/systemd-fsck@.service \
$systemdsystemunitdir/systemd-udevd.service \
$systemdsystemunitdir/systemd-udev-trigger.service \
$systemdsystemunitdir/systemd-udev-settle.service \
$systemdsystemunitdir/systemd-ask-password-plymouth.service \
$systemdsystemunitdir/systemd-journald.service \
$systemdsystemunitdir/systemd-vconsole-setup.service \
$systemdsystemunitdir/systemd-random-seed-load.service \
$systemdsystemunitdir/systemd-sysctl.service \
\
$systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-ask-password-console.path \
$systemdsystemunitdir/sysinit.target.wants/systemd-journald.service \
$systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \
$systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \
$systemdsystemunitdir/sysinit.target.wants/kmod-static-nodes.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup-dev.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \
\
$systemdsystemunitdir/ctrl-alt-del.target \
$systemdsystemunitdir/syslog.socket \
$systemdsystemunitdir/initrd-switch-root.target \
$systemdsystemunitdir/initrd-switch-root.service \
$systemdsystemunitdir/initrd-cleanup.service \
$systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
$systemdsystemunitdir/initrd-parse-etc.service \
\
$systemdsystemunitdir/slices.target \
$systemdsystemunitdir/system.slice \
$systemdsystemunitdir/-.slice \
\
$tmpfilesdir/systemd.conf \
\
systemd-run systemd-escape \
journalctl systemctl echo swapoff systemd-cgls systemd-tmpfiles
inst_multiple -o \
/usr/lib/modules-load.d/*.conf \
/usr/lib/sysctl.d/*.conf
modules_load_get() {
local _line i
for i in "$1"/*.conf; do
[[ -f $i ]] || continue
while read _line; do
case $_line in
\#*)
;;
\;*)
;;
*)
echo $_line
esac
done < "$i"
done
}
_mods=$(modules_load_get /usr/lib/modules-load.d)
[[ $_mods ]] && hostonly='' instmods $_mods
if [[ $hostonly ]]; then
inst_multiple -o \
/etc/systemd/journald.conf \
/etc/systemd/system.conf \
/etc/hostname \
/etc/machine-id \
/etc/vconsole.conf \
/etc/locale.conf \
/etc/modules-load.d/*.conf \
/etc/sysctl.d/*.conf \
/etc/sysctl.conf
_mods=$(modules_load_get /etc/modules-load.d)
[[ $_mods ]] && hostonly='' instmods $_mods
fi
if ! [[ -e "$initdir/etc/machine-id" ]]; then
> "$initdir/etc/machine-id"
fi
# install adm user/group for journald
inst_multiple nologin
egrep '^systemd-journal:' "$initdir/etc/passwd" 2>/dev/null >> "$initdir/etc/passwd"
egrep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
ln_r $systemdutildir/systemd "/init"
ln_r $systemdutildir/systemd "/sbin/init"
inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency
inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service
inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service
inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service
ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline
inst_script "$moddir/dracut-cmdline-ask.sh" /bin/dracut-cmdline-ask
inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev
inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger
inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue
inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount
inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount
inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot
inst_script "$moddir/rootfs-generator.sh" $systemdutildir/system-generators/dracut-rootfs-generator
inst_binary true
ln_r $(type -P true) "/usr/bin/loginctl"
ln_r $(type -P true) "/bin/loginctl"
inst_rules \
70-uaccess.rules \
71-seat.rules \
73-seat-late.rules \
90-vconsole.rules \
99-systemd.rules
for i in \
emergency.target \
dracut-emergency.service \
rescue.service \
systemd-ask-password-console.service \
systemd-ask-password-plymouth.service \
; do
mkdir -p "${initdir}${systemdsystemunitdir}/${i}.wants"
ln_r "${systemdsystemunitdir}/systemd-vconsole-setup.service" \
"${systemdsystemunitdir}/${i}.wants/systemd-vconsole-setup.service"
done
mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants"
for i in \
dracut-cmdline.service \
dracut-cmdline-ask.service \
dracut-initqueue.service \
dracut-mount.service \
dracut-pre-mount.service \
dracut-pre-pivot.service \
dracut-pre-trigger.service \
dracut-pre-udev.service \
; do
inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}"
ln_r "$systemdsystemunitdir/${i}" "$systemdsystemunitdir/initrd.target.wants/${i}"
done
inst_simple "$moddir/dracut-tmpfiles.conf" "$tmpfilesdir/dracut-tmpfiles.conf"
mkdir -p "$initdir/etc/systemd"
# We must use a volatile journal, and we don't want rate-limiting
{
echo "[Journal]"
echo "Storage=volatile"
echo "RateLimitInterval=0"
echo "RateLimitBurst=0"
} >> "$initdir/etc/systemd/journald.conf"
}
98systemd/dracut-cmdline.service 0000644 00000002210 15272355677 0012710 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=dracut cmdline hook
Documentation=man:dracut-cmdline.service(8)
DefaultDependencies=no
Before=dracut-pre-udev.service
After=systemd-journald.socket
Wants=systemd-journald.socket
ConditionPathExists=/etc/initrd-release
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cmdline
ConditionKernelCommandLine=|rd.break=cmdline
ConditionKernelCommandLine=|resume
ConditionKernelCommandLine=|noresume
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-cmdline
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/rootfs-generator.sh 0000755 00000007160 15272355677 0012303 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
generator_wait_for_dev()
{
local _name
local _timeout
_name="$(str_replace "$1" '/' '\x2f')"
_timeout=$(getarg rd.timeout)
_timeout=${_timeout:-0}
if ! [ -e "$hookdir/initqueue/finished/devexists-${_name}.sh" ]; then
printf '[ -e "%s" ]\n' $1 \
>> "$hookdir/initqueue/finished/devexists-${_name}.sh"
{
printf '[ -e "%s" ] || ' $1
printf 'warn "\"%s\" does not exist"\n' $1
} >> "$hookdir/emergency/80-${_name}.sh"
fi
_name=$(dev_unit_name "$1")
if ! [ -L "$GENERATOR_DIR"/initrd.target.wants/${_name}.device ]; then
[ -d "$GENERATOR_DIR"/initrd.target.wants ] || mkdir -p "$GENERATOR_DIR"/initrd.target.wants
ln -s ../${_name}.device "$GENERATOR_DIR"/initrd.target.wants/${_name}.device
fi
if ! [ -f "$GENERATOR_DIR"/${_name}.device.d/timeout.conf ]; then
mkdir -p "$GENERATOR_DIR"/${_name}.device.d
{
echo "[Unit]"
echo "JobTimeoutSec=$_timeout"
} > "$GENERATOR_DIR"/${_name}.device.d/timeout.conf
fi
}
generator_mount_rootfs()
{
local _type=$2
local _flags=$3
local _name
[ -z "$1" ] && return 0
_name=$(dev_unit_name "$1")
[ -d "$GENERATOR_DIR" ] || mkdir -p "$GENERATOR_DIR"
if ! [ -f "$GENERATOR_DIR"/sysroot.mount ]; then
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "Requires=systemd-fsck@${_name}.service"
echo "After=systemd-fsck@${_name}.service"
echo "[Mount]"
echo "Where=/sysroot"
echo "What=$1"
echo "Options=${_flags}"
echo "Type=${_type}"
} > "$GENERATOR_DIR"/sysroot.mount
fi
if ! [ -L "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount ]; then
[ -d "$GENERATOR_DIR"/initrd-root-fs.target.requires ] || mkdir -p "$GENERATOR_DIR"/initrd-root-fs.target.requires
ln -s ../sysroot.mount "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount
fi
}
generator_fsck_after_pre_mount()
{
local _name
[ -z "$1" ] && return 0
_name=$(dev_unit_name "$1")
[ -d /run/systemd/generator/systemd-fsck@${_name}.service.d ] || mkdir -p /run/systemd/generator/systemd-fsck@${_name}.service.d
if ! [ -f /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf ]; then
{
echo "[Unit]"
echo "After=dracut-pre-mount.service"
} > /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf
fi
}
root=$(getarg root=)
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/nfs) # ignore legacy /dev/nfs
;;
/dev/*)
root="block:${root}"
rootok=1 ;;
esac
GENERATOR_DIR="$1"
if [ "$rootok" = "1" ]; then
generator_wait_for_dev "${root#block:}" "$RDRETRY"
generator_fsck_after_pre_mount "${root#block:}"
strstr "$(cat /proc/cmdline)" 'root=' || generator_mount_rootfs "${root#block:}" "$(getarg rootfstype=)" "$(getarg rootflags=)"
fi
exit 0
98systemd/dracut-cmdline.service.8 0000644 00000003021 15272355677 0013057 0 ustar 00 '\" t
.\" Title: dracut-cmdline.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\" Date: 09/12/2013
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-CMDLINE\&.SE" "8" "09/12/2013" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-cmdline.service \- runs the dracut hooks to parse the kernel command line
.SH "SYNOPSIS"
.sp
dracut\-cmdline\&.service
.SH "DESCRIPTION"
.sp
This service runs all the dracut hooks to parse the kernel command line in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
98systemd/dracut-pre-mount.service.8.asc 0000644 00000000662 15272355677 0014147 0 ustar 00 DRACUT-PRE-MOUNT.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-mount.service - runs the dracut hooks before /sysroot is mounted
SYNOPSIS
--------
dracut-pre-mount.service
DESCRIPTION
-----------
This service runs all dracut hooks before the real root is mounted on /sysroot.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
98systemd/initrd.target 0000644 00000000367 15272355677 0011147 0 ustar 00 [Unit]
Description=Initrd Target
Requires=basic.target
Conflicts=rescue.service rescue.target
After=basic.target rescue.service rescue.target
AllowIsolate=yes
OnFailure=emergency.target
OnFailureIsolate=yes
ConditionPathExists=/etc/initrd-release
98systemd/dracut-pre-udev.sh 0000755 00000002763 15272355677 0012016 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-udev' 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break pre-udev"
source_hook pre-udev
_modprobe_d=/etc/modprobe.d
if [ -d /usr/lib/modprobe.d ] ; then
_modprobe_d=/usr/lib/modprobe.d
elif [ -d /lib/modprobe.d ] ; then
_modprobe_d=/lib/modprobe.d
elif [ ! -d $_modprobe_d ] ; then
mkdir -p $_modprobe_d
fi
for i in $(getargs rd.driver.pre -d rdloaddriver=); do
(
IFS=,
for p in $i; do
modprobe $p 2>&1 | vinfo
done
)
done
[ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d
for i in $(getargs rd.driver.blacklist -d rdblacklist=); do
(
IFS=,
for p in $i; do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
done
)
done
for p in $(getargs rd.driver.post -d rdinsmodpost=); do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
_do_insmodpost=1
done
[ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh
unset _do_insmodpost _modprobe_d
unset i
export -p > /dracut-state.sh
exit 0
98systemd/dracut-shutdown.service 0000644 00000001245 15272355677 0013157 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
[Unit]
Description=Restore /run/initramfs
Documentation=man:dracut-shutdown.service(8)
After=getty@tty1.service display-manager.service
Before=systemd-reboot.service shutdown.target
DefaultDependencies=no
ConditionPathExists=/run/initramfs/.need_shutdown
ConditionPathExists=!/run/initramfs/bin/sh
[Service]
ExecStart=-/usr/lib/dracut/dracut-initramfs-restore
Type=oneshot
RemainAfterExit=yes
98systemd/dracut-mount.sh 0000755 00000002222 15272355677 0011417 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
i=0
while :; do
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
umount "$NEWROOT"
fi
for f in $hookdir/mount/*.sh; do
[ -f "$f" ] && . "$f"
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
umount "$NEWROOT"
rm -f -- "$f"
fi
done
i=$(($i+1))
[ $i -gt 20 ] && action_on_fail "Can't mount root filesystem" && break
done
export -p > /dracut-state.sh
exit 0
98systemd/dracut-pre-udev.service 0000644 00000002262 15272355677 0013033 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=dracut pre-udev hook
Documentation=man:dracut-pre-udev.service(8)
DefaultDependencies=no
Before=systemd-udevd.service dracut-pre-trigger.service
After=dracut-cmdline.service
Wants=dracut-cmdline.service
ConditionPathExists=/etc/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-udev
ConditionKernelCommandLine=|rd.break=pre-udev
ConditionKernelCommandLine=|rd.driver.blacklist
ConditionKernelCommandLine=|rd.driver.pre
ConditionKernelCommandLine=|rd.driver.post
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-udev
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-pre-pivot.service 0000644 00000002042 15272355677 0013225 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=dracut pre-pivot and cleanup hook
Documentation=man:dracut-pre-pivot.service(8)
After=initrd.target initrd-parse-etc.service sysroot.mount
After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service
Before=initrd-cleanup.service
Wants=remote-fs.target
After=remote-fs.target
ConditionPathExists=/etc/initrd-release
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-pivot
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-pre-mount.service.8 0000644 00000003010 15272355677 0013370 0 ustar 00 '\" t
.\" Title: dracut-pre-mount.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets v1.78.1 <http://docbook.sf.net/>
.\" Date: 09/12/2013
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-MOUNT\&" "8" "09/12/2013" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-mount.service \- runs the dracut hooks before /sysroot is mounted
.SH "SYNOPSIS"
.sp
dracut\-pre\-mount\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before the real root is mounted on /sysroot\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
98systemd/dracut-initqueue.service 0000644 00000002567 15272355677 0013324 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=dracut initqueue hook
Documentation=man:dracut-initqueue.service(8)
DefaultDependencies=no
Before=remote-fs-pre.target
Wants=remote-fs-pre.target
After=systemd-udev-trigger.service
Wants=systemd-udev-trigger.service
ConditionPathExists=/etc/initrd-release
ConditionPathExists=|/lib/dracut/need-initqueue
ConditionPathExistsGlob=|/lib/dracut/hooks/initqueue/*.sh
ConditionPathExistsGlob=|/lib/dracut/hooks/initqueue/settled/*.sh
ConditionPathExistsGlob=|/lib/dracut/hooks/initqueue/finished/*.sh
ConditionPathExistsGlob=|/lib/dracut/hooks/initqueue/online/*.sh
ConditionPathExistsGlob=|/lib/dracut/hooks/initqueue/timeout/*.sh
ConditionKernelCommandLine=|rd.break=initqueue
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-initqueue
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-cmdline.service.8.asc 0000644 00000000672 15272355677 0013635 0 ustar 00 DRACUT-CMDLINE.SERVICE(8)
=========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-cmdline.service - runs the dracut hooks to parse the kernel command line
SYNOPSIS
--------
dracut-cmdline.service
DESCRIPTION
-----------
This service runs all the dracut hooks to parse the kernel command line in
the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
98systemd/dracut-pre-trigger.service 0000644 00000002222 15272355677 0013527 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=dracut pre-trigger hook
Documentation=man:dracut-pre-trigger.service(8)
DefaultDependencies=no
Before=systemd-udev-trigger.service dracut-initqueue.service
After=dracut-pre-udev.service systemd-udevd.service systemd-tmpfiles-setup-dev.service
Wants=dracut-pre-udev.service systemd-udevd.service
ConditionPathExists=/etc/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-trigger
ConditionKernelCommandLine=|rd.break=pre-trigger
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-trigger
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-initqueue.service.8.asc 0000644 00000000667 15272355677 0014236 0 ustar 00 DRACUT-INITQUEUE.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-initqueue.service - runs the dracut main loop to find the real root
SYNOPSIS
--------
dracut-initqueue.service
DESCRIPTION
-----------
This service runs all the main loop of dracut in the initramfs to find the real root.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
98systemd/dracut-cmdline-ask.service 0000644 00000001722 15272355677 0013473 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See systemd.special(7) for details
[Unit]
Description=dracut ask for additional cmdline parameters
DefaultDependencies=no
Before=dracut-cmdline.service
After=systemd-journald.socket
Wants=systemd-journald.socket
ConditionPathExists=/etc/initrd-release
ConditionKernelCommandLine=rd.cmdline=ask
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-cmdline-ask
StandardInput=tty
StandardOutput=inherit
StandardError=inherit
RemainAfterExit=yes
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
98systemd/dracut-pre-mount.sh 0000755 00000001156 15272355677 0012210 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-mount' 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
export -p > /dracut-state.sh
exit 0
98systemd/dracut-pre-trigger.sh 0000755 00000001114 15272355677 0012503 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab' '4+:komem'
source_hook pre-trigger
getarg 'rd.break=pre-trigger' 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break pre-trigger"
udevadm control --reload >/dev/null 2>&1 || :
export -p > /dracut-state.sh
exit 0
99kdumpbase/kdump-capture.service 0000644 00000001655 15272355677 0013076 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Kdump Vmcore Save Service
After=initrd.target initrd-parse-etc.service sysroot.mount
After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service dracut-pre-pivot.service
Before=initrd-cleanup.service
ConditionPathExists=/etc/initrd-release
OnFailure=emergency.target
OnFailureIsolate=yes
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=/bin/kdump.sh
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
99kdumpbase/kdump.sh 0000755 00000011234 15272355677 0010404 0 ustar 00 #!/bin/sh
# continue here only if we have to save dump.
if [ -f /etc/fadump.initramfs ] && [ ! -f /proc/device-tree/rtas/ibm,kernel-dump ]; then
exit 0
fi
exec &> /dev/console
. /lib/dracut-lib.sh
. /lib/kdump-lib-initramfs.sh
set -o pipefail
DUMP_RETVAL=0
export PATH=$PATH:$KDUMP_SCRIPT_DIR
do_dump()
{
local _ret
eval $DUMP_INSTRUCTION
_ret=$?
if [ $_ret -ne 0 ]; then
echo "kdump: saving vmcore failed"
fi
return $_ret
}
do_kdump_pre()
{
if [ -n "$KDUMP_PRE" ]; then
"$KDUMP_PRE"
fi
}
do_kdump_post()
{
if [ -n "$KDUMP_POST" ]; then
"$KDUMP_POST" "$1"
fi
}
add_dump_code()
{
DUMP_INSTRUCTION=$1
}
dump_raw()
{
local _raw=$1
[ -b "$_raw" ] || return 1
echo "kdump: saving to raw disk $_raw"
if ! $(echo -n $CORE_COLLECTOR|grep -q makedumpfile); then
_src_size=`ls -l /proc/vmcore | cut -d' ' -f5`
_src_size_mb=$(($_src_size / 1048576))
monitor_dd_progress $_src_size_mb &
fi
echo "kdump: saving vmcore"
$CORE_COLLECTOR /proc/vmcore | dd of=$_raw bs=$DD_BLKSIZE >> /tmp/dd_progress_file 2>&1 || return 1
sync
echo "kdump: saving vmcore complete"
return 0
}
dump_ssh()
{
local _opt="-i $1 -o BatchMode=yes -o StrictHostKeyChecking=yes"
local _dir="$KDUMP_PATH/$HOST_IP-$DATEDIR"
local _host=$2
echo "kdump: saving to $_host:$_dir"
cat /var/lib/random-seed > /dev/urandom
ssh -q $_opt $_host mkdir -p $_dir || return 1
save_vmcore_dmesg_ssh ${DMESG_COLLECTOR} ${_dir} "${_opt}" $_host
echo "kdump: saving vmcore"
if [ "${CORE_COLLECTOR%%[[:blank:]]*}" = "scp" ]; then
scp -q $_opt /proc/vmcore "$_host:$_dir/vmcore-incomplete" || return 1
ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/vmcore" || return 1
else
$CORE_COLLECTOR /proc/vmcore | ssh $_opt $_host "dd bs=512 of=$_dir/vmcore-incomplete" || return 1
ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/vmcore.flat" || return 1
fi
echo "kdump: saving vmcore complete"
return 0
}
save_vmcore_dmesg_ssh() {
local _dmesg_collector=$1
local _path=$2
local _opts="$3"
local _location=$4
echo "kdump: saving vmcore-dmesg.txt"
$_dmesg_collector /proc/vmcore | ssh $_opts $_location "dd of=$_path/vmcore-dmesg-incomplete.txt"
_exitcode=$?
if [ $_exitcode -eq 0 ]; then
ssh -q $_opts $_location mv $_path/vmcore-dmesg-incomplete.txt $_path/vmcore-dmesg.txt
echo "kdump: saving vmcore-dmesg.txt complete"
else
echo "kdump: saving vmcore-dmesg.txt failed"
fi
}
get_host_ip()
{
local _host
if is_nfs_dump_target || is_ssh_dump_target
then
kdumpnic=$(getarg kdumpnic=)
[ -z "$kdumpnic" ] && echo "kdump: failed to get kdumpnic!" && return 1
_host=`ip addr show dev $kdumpnic|grep '[ ]*inet'`
[ $? -ne 0 ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1
_host=`echo $_host | head -n 1 | cut -d' ' -f2`
_host="${_host%%/*}"
[ -z "$_host" ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1
HOST_IP=$_host
fi
return 0
}
read_kdump_conf()
{
if [ ! -f "$KDUMP_CONF" ]; then
echo "kdump: $KDUMP_CONF not found"
return
fi
get_kdump_confs
# rescan for add code for dump target
while read config_opt config_val;
do
# remove inline comments after the end of a directive.
case "$config_opt" in
dracut_args)
config_val=$(get_dracut_args_target "$config_val")
[[ -n "$config_val" ]] && add_dump_code "dump_fs $config_val"
;;
ext[234]|xfs|btrfs|minix|nfs)
add_dump_code "dump_fs $config_val"
;;
raw)
add_dump_code "dump_raw $config_val"
;;
ssh)
add_dump_code "dump_ssh $SSH_KEY_LOCATION $config_val"
;;
esac
done <<< "$(read_strip_comments $KDUMP_CONF)"
}
fence_kdump_notify()
{
if [ -n "$FENCE_KDUMP_NODES" ]; then
$FENCE_KDUMP_SEND $FENCE_KDUMP_ARGS $FENCE_KDUMP_NODES &
fi
}
read_kdump_conf
fence_kdump_notify
get_host_ip
if [ $? -ne 0 ]; then
echo "kdump: get_host_ip exited with non-zero status!"
exit 1
fi
if [ -z "$DUMP_INSTRUCTION" ]; then
add_dump_code "dump_fs $NEWROOT"
fi
do_kdump_pre
if [ $? -ne 0 ]; then
echo "kdump: kdump_pre script exited with non-zero status!"
do_final_action
fi
make_trace_mem "kdump saving vmcore" '1:shortmem' '2+:mem' '3+:slab'
do_dump
DUMP_RETVAL=$?
do_kdump_post $DUMP_RETVAL
if [ $? -ne 0 ]; then
echo "kdump: kdump_post script exited with non-zero status!"
fi
if [ $DUMP_RETVAL -ne 0 ]; then
exit 1
fi
do_final_action
99kdumpbase/kdump-emergency.service 0000644 00000001611 15272355677 0013401 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# This service will be placed in kdump initramfs and replace both the systemd
# emergency service and dracut emergency shell. IOW, any emergency will be
# kick this service and in turn isolating to kdump error handler.
[Unit]
Description=Kdump Emergency
DefaultDependencies=no
IgnoreOnIsolate=yes
[Service]
ExecStart=/usr/bin/systemctl --no-block isolate kdump-error-handler.service
Type=oneshot
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
99kdumpbase/kdump-error-handler.service 0000644 00000001741 15272355677 0014173 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# This service will run the real kdump error handler code. Executing the
# default action configured in kdump.conf
[Unit]
Description=Kdump Error Handler
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
AllowIsolate=yes
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=/bin/kdump-error-handler.sh
ExecStopPost=-/usr/bin/systemctl --fail --no-block default
Type=oneshot
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
99kdumpbase/module-setup.sh 0000755 00000063432 15272355677 0011716 0 ustar 00 #!/bin/bash
. $dracutfunctions
. /lib/kdump/kdump-lib.sh
if ! [[ -d "${initdir}/tmp" ]]; then
mkdir -p "${initdir}/tmp"
fi
check() {
[[ $debug ]] && set -x
#kdumpctl sets this explicitly
if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ]
then
return 1
fi
return 0
}
depends() {
local _dep="base shutdown"
if [ -n "$( find /sys/devices -name drm )" ] || [ -d /sys/module/hyperv_fb ]; then
_dep="$_dep drm"
fi
if is_generic_fence_kdump || is_pcs_fence_kdump; then
_dep="$_dep network"
fi
echo $_dep
return 0
}
kdump_to_udev_name() {
local dev="${1//\"/}"
case "$dev" in
UUID=*)
dev=`blkid -U "${dev#UUID=}"`
;;
LABEL=*)
dev=`blkid -L "${dev#LABEL=}"`
;;
esac
echo $(get_persistent_dev "$dev")
}
kdump_is_bridge() {
[ -d /sys/class/net/"$1"/bridge ]
}
kdump_is_bond() {
[ -d /sys/class/net/"$1"/bonding ]
}
kdump_is_team() {
[ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null
}
kdump_is_vlan() {
[ -f /proc/net/vlan/"$1" ]
}
# $1: netdev name
source_ifcfg_file() {
local ifcfg_file
ifcfg_file=$(get_ifcfg_filename $1)
if [ -f "${ifcfg_file}" ]; then
. ${ifcfg_file}
else
dwarning "The ifcfg file of $1 is not found!"
fi
}
# $1: netdev name
kdump_setup_dns() {
local _nameserver _dns
local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf
source_ifcfg_file $1
[ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile"
[ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile"
while read content;
do
_nameserver=$(echo $content | grep ^nameserver)
[ -z "$_nameserver" ] && continue
_dns=$(echo $_nameserver | cut -d' ' -f2)
[ -z "$_dns" ] && continue
if [ ! -f $_dnsfile ] || [ ! $(cat $_dnsfile | grep -q $_dns) ]; then
echo "nameserver=$_dns" >> "$_dnsfile"
fi
done < "/etc/resolv.conf"
}
#$1: netdev name
#$2: srcaddr
#if it use static ip echo it, or echo null
kdump_static_ip() {
local _netdev="$1" _srcaddr="$2" _ipv6_flag
local _netmask _gateway _ipaddr _target _nexthop
_ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}")
if is_ipv6_address $_srcaddr; then
_ipv6_flag="-6"
fi
if [ -n "$_ipaddr" ]; then
_gateway=$(ip $_ipv6_flag route list dev $_netdev | \
awk '/^default /{print $3}' | head -n 1)
if [ "x" != "x"$_ipv6_flag ]; then
# _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/"
_netmask=${_ipaddr#*\/}
_srcaddr="[$_srcaddr]"
_gateway="[$_gateway]"
else
_netmask=$(ipcalc -m $_ipaddr | cut -d'=' -f2)
fi
echo -n "${_srcaddr}::${_gateway}:${_netmask}::"
fi
/sbin/ip $_ipv6_flag route show | grep -v default | grep ".*via.* $_netdev " |\
while read _route; do
_target=`echo $_route | cut -d ' ' -f1`
_nexthop=`echo $_route | cut -d ' ' -f3`
if [ "x" != "x"$_ipv6_flag ]; then
_target="[$_target]"
_nexthop="[$_nexthop]"
fi
echo "rd.route=$_target:$_nexthop:$_netdev"
done >> ${initdir}/etc/cmdline.d/45route-static.conf
}
kdump_get_mac_addr() {
cat /sys/class/net/$1/address
}
#Bonding or team master modifies the mac address
#of its slaves, we should use perm address
kdump_get_perm_addr() {
local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //')
if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ]
then
derror "Can't get the permanent address of $1"
else
echo "$addr"
fi
}
# Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0
# Because kernel assigned names are not persistent between 1st and 2nd
# kernel. We could probably end up with eth0 being eth1, eth0 being
# eth1, and naming conflict happens.
kdump_setup_ifname() {
local _ifname
# If ifname already has 'kdump-' prefix, we must be switching from
# fadump to kdump. Skip prefixing 'kdump-' in this case as adding
# another prefix may truncate the ifname. Since an ifname with
# 'kdump-' is already persistent, this should be fine.
if [[ $1 =~ eth* ]] && [[ ! $1 =~ ^kdump-* ]]; then
_ifname="kdump-$1"
else
_ifname="$1"
fi
echo "$_ifname"
}
kdump_setup_bridge() {
local _netdev=$1
local _brif _dev _mac _kdumpdev
for _dev in `ls /sys/class/net/$_netdev/brif/`; do
_kdumpdev=$_dev
if kdump_is_bond "$_dev"; then
kdump_setup_bond "$_dev"
elif kdump_is_team "$_dev"; then
kdump_setup_team "$_dev"
elif kdump_is_vlan "$_dev"; then
kdump_setup_vlan "$_dev"
else
_mac=$(kdump_get_mac_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf
fi
_brif+="$_kdumpdev,"
done
echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf
}
kdump_setup_bond() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do
_mac=$(kdump_get_perm_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf
_slaves+="$_kdumpdev,"
done
echo -n " bond=$_netdev:$(echo $_slaves | sed 's/,$//')" >> ${initdir}/etc/cmdline.d/42bond.conf
# Get bond options specified in ifcfg
source_ifcfg_file $_netdev
bondoptions=":$(echo $BONDING_OPTS | xargs echo | tr " " ",")"
echo "$bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf
}
kdump_setup_team() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do
_mac=$(kdump_get_perm_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf
_slaves+="$_kdumpdev,"
done
echo " team=$_netdev:$(echo $_slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf
#Buggy version teamdctl outputs to stderr!
#Try to use the latest version of teamd.
teamdctl "$_netdev" config dump > ${initdir}/tmp/$$-$_netdev.conf
if [ $? -ne 0 ]
then
derror "teamdctl failed."
exit 1
fi
inst_dir /etc/teamd
inst_simple ${initdir}/tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf"
rm -f ${initdir}/tmp/$$-$_netdev.conf
}
kdump_setup_vlan() {
local _netdev=$1
local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
local _netmac="$(kdump_get_mac_addr $_phydev)"
local _kdumpdev
#Just support vlan over bond, it is not easy
#to support all other complex setup
if kdump_is_bridge "$_phydev"; then
derror "Vlan over bridge is not supported!"
exit 1
elif kdump_is_team "$_phydev"; then
derror "Vlan over team is not supported!"
exit 1
elif kdump_is_bond "$_phydev"; then
kdump_setup_bond "$_phydev"
echo " vlan=$(kdump_setup_ifname $_netdev):$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf
else
_kdumpdev="$(kdump_setup_ifname $_phydev)"
echo " vlan=$(kdump_setup_ifname $_netdev):$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf
fi
}
# setup s390 znet cmdline
# $1: netdev name
kdump_setup_znet() {
local _options=""
local _netdev=$1
source_ifcfg_file $_netdev
for i in $OPTIONS; do
_options=${_options},$i
done
echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} rd.znet_ifname=$_netdev:${SUBCHANNELS} > ${initdir}/etc/cmdline.d/30znet.conf
}
# Setup dracut to bringup a given network interface
kdump_setup_netdev() {
local _netdev=$1 _srcaddr=$2
local _static _proto _ip_conf _ip_opts _ifname_opts
if [ "$(uname -m)" = "s390x" ]; then
kdump_setup_znet $_netdev
fi
_netmac=$(kdump_get_mac_addr $_netdev)
_static=$(kdump_static_ip $_netdev $_srcaddr)
if [ -n "$_static" ]; then
_proto=none
elif is_ipv6_address $_srcaddr; then
_proto=either6
else
_proto=dhcp
fi
_ip_conf="${initdir}/etc/cmdline.d/40ip.conf"
_ip_opts=" ip=${_static}$(kdump_setup_ifname $_netdev):${_proto}"
# dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.
# so we have to avoid adding duplicates
# We should also check /proc/cmdline for existing ip=xx arg.
# For example, iscsi boot will specify ip=xxx arg in cmdline.
if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\
! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then
echo "$_ip_opts" >> $_ip_conf
fi
if kdump_is_bridge "$_netdev"; then
kdump_setup_bridge "$_netdev"
elif kdump_is_bond "$_netdev"; then
kdump_setup_bond "$_netdev"
elif kdump_is_team "$_netdev"; then
kdump_setup_team "$_netdev"
elif kdump_is_vlan "$_netdev"; then
kdump_setup_vlan "$_netdev"
else
_ifname_opts=" ifname=$(kdump_setup_ifname $_netdev):$(kdump_get_mac_addr $_netdev)"
echo "$_ifname_opts" >> $_ip_conf
fi
kdump_setup_dns "$_netdev"
}
get_ip_route_field()
{
if `echo $1 | grep -q $2`; then
echo ${1##*$2} | cut -d ' ' -f1
fi
}
#Function:kdump_install_net
#$1: config values of net line in kdump.conf
#$2: srcaddr of network device
kdump_install_net() {
local _server _netdev _srcaddr _route _serv_tmp
local config_val="$1"
_server=$(get_remote_host $config_val)
if is_hostname $_server; then
_serv_tmp=`getent ahosts $_server | grep -v : | head -n 1`
if [ -z "$_serv_tmp" ]; then
_serv_tmp=`getent ahosts $_server | head -n 1`
fi
_server=`echo $_serv_tmp | cut -d' ' -f1`
fi
_route=`/sbin/ip -o route get to $_server 2>&1`
[ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1
#the field in the ip output changes if we go to another subnet
_srcaddr=$(get_ip_route_field "$_route" "src")
_netdev=$(get_ip_route_field "$_route" "dev")
kdump_setup_netdev "${_netdev}" "${_srcaddr}"
#save netdev used for kdump as cmdline
# Whoever calling kdump_install_net() is setting up the default gateway,
# ie. bootdev/kdumpnic. So don't override the setting if calling
# kdump_install_net() for another time. For example, after setting eth0 as
# the default gate way for network dump, eth1 in the fence kdump path will
# call kdump_install_net again and we don't want eth1 to be the default
# gateway.
if [ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ] &&
[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then
echo "kdumpnic=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/60kdumpnic.conf
echo "bootdev=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/70bootdev.conf
fi
}
default_dump_target_install_conf()
{
local _target _fstype
local _mntpoint _save_path
is_user_configured_dump_target && return
_save_path=$(get_option_value "path")
[ -z "$_save_path" ] && _save_path=$DEFAULT_PATH
# strip the duplicated "/"
_save_path=$(echo $_save_path | tr -s /)
_mntpoint=$(get_mntpoint_from_path $_save_path)
_target=$(get_target_from_path $_save_path)
if is_atomic && is_bind_mount $_mntpoint; then
_save_path=${_save_path##"$_mntpoint"}
# the real dump path in the 2nd kernel, if the mount point is bind mounted.
_save_path=$(get_bind_mount_directory $_mntpoint)/$_save_path
_mntpoint=$(get_mntpoint_from_target $_target)
# the absolute path in the 1st kernel
_save_path=$_mntpoint/$_save_path
fi
_fstype=$(get_fs_type_from_target $_target)
if $(is_fs_type_nfs $_fstype); then
kdump_install_net "$_target"
_fstype="nfs"
else
_target=$(kdump_to_udev_name $_target)
fi
echo "$_fstype $_target" >> ${initdir}/tmp/$$-kdump.conf
# strip the duplicated "/"
_save_path=$(echo $_save_path | tr -s /)
# don't touch the path under root mount
if [ "$_mntpoint" != "/" ]; then
_save_path=${_save_path##"$_mntpoint"}
fi
#erase the old path line, then insert the parsed path
sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf
echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf
}
adjust_bind_mount_path()
{
local _target=$1
local _save_path=$(get_option_value "path")
[ -z "$_save_path" ] && _save_path=$DEFAULT_PATH
# strip the duplicated "/"
_save_path=$(echo $_save_path | tr -s /)
local _absolute_save_path=$(get_mntpoint_from_target $_target)/$_save_path
_absolute_save_path=$(echo "$_absolute_save_path" | tr -s /)
local _mntpoint=$(get_mntpoint_from_path $_absolute_save_path)
if is_bind_mount $_mntpoint; then
_save_path=${_absolute_save_path##"$_mntpoint"}
# the real dump path in the 2nd kernel, if the mount point is bind mounted.
_save_path=$(get_bind_mount_directory $_mntpoint)/$_save_path
#erase the old path line, then insert the parsed path
sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf
echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf
fi
}
#install kdump.conf and what user specifies in kdump.conf
kdump_install_conf() {
sed -ne '/^#/!p' /etc/kdump.conf > ${initdir}/tmp/$$-kdump.conf
while read config_opt config_val;
do
# remove inline comments after the end of a directive.
case "$config_opt" in
ext[234]|xfs|btrfs|minix|raw)
sed -i -e "s#^$config_opt[[:space:]]\+$config_val#$config_opt $(kdump_to_udev_name $config_val)#" ${initdir}/tmp/$$-kdump.conf
if is_atomic; then
adjust_bind_mount_path "$config_val"
fi
;;
ssh|nfs)
kdump_install_net "$config_val"
;;
dracut_args)
if [[ $(get_dracut_args_fstype "$config_val") = nfs* ]] ; then
kdump_install_net "$(get_dracut_args_target "$config_val")"
fi
;;
kdump_pre|kdump_post|extra_bins)
dracut_install $config_val
;;
core_collector)
dracut_install "${config_val%%[[:blank:]]*}"
;;
esac
done <<< "$(read_strip_comments /etc/kdump.conf)"
default_dump_target_install_conf
kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf"
inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf"
rm -f ${initdir}/tmp/$$-kdump.conf
}
# Default sysctl parameters should suffice for kdump kernel.
# Remove custom configurations sysctl.conf & sysctl.d/*
remove_sysctl_conf() {
# As custom configurations like vm.min_free_kbytes can lead
# to OOM issues in kdump kernel, avoid them
rm -f "${initdir}/etc/sysctl.conf"
rm -rf "${initdir}/etc/sysctl.d"
rm -rf "${initdir}/run/sysctl.d"
rm -rf "${initdir}/usr/lib/sysctl.d"
}
kdump_iscsi_get_rec_val() {
local result
# The open-iscsi 742 release changed to using flat files in
# /var/lib/iscsi.
result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ")
result=${result##* = }
echo $result
}
kdump_get_iscsi_initiator() {
local _initiator
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
[ -f "$initiator_conf" ] || return 1
while read _initiator; do
[ -z "${_initiator%%#*}" ] && continue # Skip comment lines
case $_initiator in
InitiatorName=*)
initiator=${_initiator#InitiatorName=}
echo "rd.iscsi.initiator=${initiator}"
return 0;;
*) ;;
esac
done < ${initiator_conf}
return 1
}
# Figure out iBFT session according to session type
is_ibft() {
[ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ]
}
kdump_setup_iscsi_device() {
local path=$1
local tgt_name; local tgt_ipaddr;
local username; local password; local userpwd_str;
local username_in; local password_in; local userpwd_in_str;
local netdev
local srcaddr
local idev
local netroot_str ; local initiator_str;
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
dinfo "Found iscsi component $1"
# Check once before getting explicit values, so we can bail out early,
# e.g. in case of pure-hardware(all-offload) iscsi.
if ! /sbin/iscsiadm -m session -r ${path} &>/dev/null ; then
return 1
fi
if is_ibft ${path}; then
return
fi
tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name")
tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address")
# get and set username and password details
username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username")
[ "$username" == "<empty>" ] && username=""
password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password")
[ "$password" == "<empty>" ] && password=""
username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in")
[ -n "$username" ] && userpwd_str="$username:$password"
# get and set incoming username and password details
[ "$username_in" == "<empty>" ] && username_in=""
password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in")
[ "$password_in" == "<empty>" ] && password_in=""
[ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in"
netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \
sed 's|.*dev \(.*\).*|\1|g')
srcaddr=$(echo $netdev | awk '{ print $3; exit }')
netdev=$(echo $netdev | awk '{ print $1; exit }')
kdump_setup_netdev $netdev $srcaddr
# prepare netroot= command line
# FIXME: Do we need to parse and set other parameters like protocol, port
# iscsi_iface_name, netdev_name, LUN etc.
if is_ipv6_address $tgt_ipaddr; then
tgt_ipaddr="[$tgt_ipaddr]"
fi
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
[[ -f $netroot_conf ]] || touch $netroot_conf
# If netroot target does not exist already, append.
if ! grep -q $netroot_str $netroot_conf; then
echo $netroot_str >> $netroot_conf
dinfo "Appended $netroot_str to $netroot_conf"
fi
# Setup initator
initiator_str=$(kdump_get_iscsi_initiator)
[ $? -ne "0" ] && derror "Failed to get initiator name" && return 1
# If initiator details do not exist already, append.
if ! grep -q "$initiator_str" $netroot_conf; then
echo "$initiator_str" >> $netroot_conf
dinfo "Appended "$initiator_str" to $netroot_conf"
fi
}
kdump_check_iscsi_targets () {
# If our prerequisites are not met, fail anyways.
type -P iscsistart >/dev/null || return 1
kdump_check_setup_iscsi() (
local _dev
_dev=$1
[[ -L /sys/dev/block/$_dev ]] || return
cd "$(readlink -f /sys/dev/block/$_dev)"
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
)
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
}
}
# hostname -a is deprecated, do it by ourself
get_alias() {
local ips
local entries
local alias_set
ips=$(hostname -I)
for ip in $ips
do
# in /etc/hosts, alias can come at the 2nd column
entries=$(grep $ip /etc/hosts | awk '{ $1=""; print $0 }')
if [ $? -eq 0 ]; then
alias_set="$alias_set $entries"
fi
done
echo $alias_set
}
is_localhost() {
local hostnames=$(hostname -A)
local shortnames=$(hostname -A -s)
local aliasname=$(get_alias)
local nodename=$1
hostnames="$hostnames $shortnames $aliasname"
for name in ${hostnames}; do
if [ "$name" == "$nodename" ]; then
return 0
fi
done
return 1
}
# retrieves fence_kdump nodes from Pacemaker cluster configuration
get_pcs_fence_kdump_nodes() {
local nodes
pcs cluster sync > /dev/null 2>&1 && pcs cluster cib-upgrade > /dev/null 2>&1
# get cluster nodes from cluster cib, get interface and ip address
nodelist=`pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -`
# nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"'
# we need to convert each to node1, node2 ... nodeX in each iteration
for node in ${nodelist}; do
# convert $node from 'uname="nodeX"' to 'nodeX'
eval $node
nodename=$uname
# Skip its own node name
if is_localhost $nodename; then
continue
fi
nodes="$nodes $nodename"
done
echo $nodes
}
# retrieves fence_kdump args from config file
get_pcs_fence_kdump_args() {
if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
. $FENCE_KDUMP_CONFIG_FILE
echo $FENCE_KDUMP_OPTS
fi
}
get_generic_fence_kdump_nodes() {
local filtered
local nodes
nodes=$(get_option_value "fence_kdump_nodes")
for node in ${nodes}; do
# Skip its own node name
if is_localhost $node; then
continue
fi
filtered="$filtered $node"
done
echo $filtered
}
# setup fence_kdump in cluster
# setup proper network and install needed files
kdump_configure_fence_kdump () {
local kdump_cfg_file=$1
local nodes
local args
if is_generic_fence_kdump; then
nodes=$(get_generic_fence_kdump_nodes)
elif is_pcs_fence_kdump; then
nodes=$(get_pcs_fence_kdump_nodes)
# set appropriate options in kdump.conf
echo "fence_kdump_nodes $nodes" >> ${kdump_cfg_file}
args=$(get_pcs_fence_kdump_args)
if [ -n "$args" ]; then
echo "fence_kdump_args $args" >> ${kdump_cfg_file}
fi
else
# fence_kdump not configured
return 1
fi
# setup network for each node
for node in ${nodes}; do
kdump_install_net $node
done
dracut_install /etc/hosts
dracut_install /etc/nsswitch.conf
dracut_install $FENCE_KDUMP_SEND
}
# Install a random seed used to feed /dev/urandom
# By the time kdump service starts, /dev/uramdom is already fed by systemd
kdump_install_random_seed() {
local poolsize=`cat /proc/sys/kernel/random/poolsize`
if [ ! -d ${initdir}/var/lib/ ]; then
mkdir -p ${initdir}/var/lib/
fi
dd if=/dev/urandom of=${initdir}/var/lib/random-seed \
bs=$poolsize count=1 2> /dev/null
}
remove_cpu_online_rule() {
local file=${initdir}/usr/lib/udev/rules.d/40-redhat.rules
sed -i '/SUBSYSTEM=="cpu"/d' $file
}
install() {
local arch
kdump_install_conf
remove_sysctl_conf
# Onlining secondary cpus breaks kdump completely on KVM on Power hosts
# Though we use maxcpus=1 by default but 40-redhat.rules will bring up all
# possible cpus by default. (rhbz1270174 rhbz1266322)
# Thus before we get the kernel fix and the systemd rule fix let's remove
# the cpu online rule in kdump initramfs.
arch=$(uname -m)
if [[ "$arch" = "ppc64le" ]] || [[ "$arch" = "ppc64" ]]; then
remove_cpu_online_rule
fi
if is_ssh_dump_target; then
kdump_install_random_seed
fi
dracut_install -o /etc/adjtime /etc/localtime
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
chmod +x ${initdir}/kdumpscripts/monitor_dd_progress
inst "/bin/grep" "/bin/grep"
inst "/bin/cat" "/bin/cat"
inst "/bin/rm" "/bin/rm"
inst "/bin/dd" "/bin/dd"
inst "/bin/tail" "/bin/tail"
inst "/bin/date" "/bin/date"
inst "/bin/sync" "/bin/sync"
inst "/bin/cut" "/bin/cut"
inst "/bin/head" "/bin/head"
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
ln_r "$systemdsystemunitdir/kdump-capture.service" "$systemdsystemunitdir/initrd.target.wants/kdump-capture.service"
inst "$moddir/kdump-error-handler.sh" "/usr/bin/kdump-error-handler.sh"
inst "$moddir/kdump-error-handler.service" "$systemdsystemunitdir/kdump-error-handler.service"
# Replace existing emergency service and emergency target
cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service"
cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target"
# Also redirect dracut-emergency to kdump error handler
ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service"
# Check for all the devices and if any device is iscsi, bring up iscsi
# target. Ideally all this should be pushed into dracut iscsi module
# at some point of time.
kdump_check_iscsi_targets
# For the lvm type target under kdump, in /etc/lvm/lvm.conf we can
# safely replace "reserved_memory=XXXX"(default value is 8192) with
# "reserved_memory=1024" to lower memory pressure under kdump. We do
# it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it
# actually does nothing.
sed -i -e \
's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \
${initdir}/etc/lvm/lvm.conf &>/dev/null
# Kdump turns out to require longer default systemd mount timeout
# than 1st kernel(90s by default), we use default 300s for kdump.
grep -r "^[[:space:]]*DefaultTimeoutStartSec=" ${initdir}/etc/systemd/system.conf* &>/dev/null
if [ $? -ne 0 ]; then
mkdir -p ${initdir}/etc/systemd/system.conf.d
echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf
echo "DefaultTimeoutStartSec=300s" >> ${initdir}/etc/systemd/system.conf.d/kdump.conf
fi
}
99kdumpbase/monitor_dd_progress 0000644 00000000742 15272355700 0012717 0 ustar 00 #!/bin/sh
SRC_FILE_MB=$1
while true
do
DD_PID=`pidof dd`
if [ -n "$DD_PID" ]; then
break
fi
done
while true
do
sleep 5
if [ ! -d /proc/$DD_PID ]; then
break
fi
kill -s USR1 $DD_PID
CURRENT_SIZE=`tail -n 1 /tmp/dd_progress_file | sed "s/[^0-9].*//g"`
[ -n "$CURRENT_SIZE" ] && {
CURRENT_MB=$(($CURRENT_SIZE / 1048576))
echo -e "Copied $CURRENT_MB MB / $SRC_FILE_MB MB\r"
}
done
rm -f /tmp/dd_progress_file
99kdumpbase/kdump-error-handler.sh 0000755 00000000221 15272355700 0013123 0 ustar 00 #!/bin/sh
. /lib/kdump-lib-initramfs.sh
set -o pipefail
export PATH=$PATH:$KDUMP_SCRIPT_DIR
get_kdump_confs
do_default_action
do_final_action
99kdumpbase/kdump-emergency.target 0000644 00000000703 15272355700 0013213 0 ustar 00 # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Emergency Mode
Documentation=man:systemd.special(7)
Requires=emergency.service
After=emergency.service
AllowIsolate=yes
IgnoreOnIsolate=yes
95zfcp/parse-zfcp.sh 0000755 00000000535 15272355700 0010306 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
getargbool 1 rd.zfcp.conf -d -n rd_NO_ZFCPCONF || rm /etc/zfcp.conf
for zfcp_arg in $(getargs rd.zfcp -d 'rd_ZFCP='); do
(
IFS=","
set $zfcp_arg
echo "$@" >> /etc/zfcp.conf
)
done
zfcp_cio_free
95zfcp/module-setup.sh 0000755 00000001251 15272355700 0010653 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
require_binaries zfcp_cio_free grep sed seq || return 1
return 0
}
depends() {
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
return 0
}
installkernel() {
instmods zfcp
}
install() {
inst_hook cmdline 30 "$moddir/parse-zfcp.sh"
inst_multiple zfcp_cio_free grep sed seq
inst_script /sbin/zfcpconf.sh
inst_rules 56-zfcp.rules
if [[ $hostonly ]]; then
inst_simple /etc/zfcp.conf
fi
}
95resume/parse-resume.sh 0000755 00000006346 15272355700 0011210 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if resume=$(getarg resume=) && ! getarg noresume; then
export resume
echo "$resume" >/.resume
else
unset resume
fi
case "$resume" in
LABEL=*) \
resume="$(echo $resume | sed 's,/,\\x2f,g')"
resume="/dev/disk/by-label/${resume#LABEL=}" ;;
UUID=*) \
resume="/dev/disk/by-uuid/${resume#UUID=}" ;;
PARTUUID=*) \
resume="/dev/disk/by-partuuid/${resume#PARTUUID=}" ;;
PARTLABEL=*) \
resume="/dev/disk/by-partlabel/${resume#PARTLABEL=}" ;;
esac
if splash=$(getarg splash=); then
export splash
else
unset splash
fi
case "$splash" in
quiet )
a_splash="-P splash=y"
;;
* )
a_splash="-P splash=n"
;;
esac
if [ -n "$resume" ]; then
{
printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"/dev/resume\"\n" \
${resume#/dev/};
printf "SYMLINK==\"%s\", ACTION==\"add|change\", SYMLINK+=\"/dev/resume\"\n" \
${resume#/dev/};
} >> /etc/udev/rules.d/99-resume-link.rules
{
if [ -x /usr/sbin/resume ]; then
printf "KERNEL==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \'%s\'\"\n" \
${resume#/dev/} "$a_splash" "$resume";
printf "SYMLINK==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \'%s\'\"\n" \
${resume#/dev/} "$a_splash" "$resume";
fi
printf "KERNEL==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/sbin/initqueue --finished --unique --name 00resume echo %%M:%%m > /sys/power/resume\"\n" \
${resume#/dev/};
printf "SYMLINK==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/sbin/initqueue --finished --unique --name 00resume echo %%M:%%m > /sys/power/resume\"\n" \
${resume#/dev/};
} >> /etc/udev/rules.d/99-resume.rules
printf '[ -e "%s" ] && { ln -s "%s" /dev/resume; rm -f -- "$job" "%s/initqueue/timeout/resume.sh"; }\n' \
"$resume" "$resume" "$hookdir" >> $hookdir/initqueue/settled/resume.sh
printf 'warn "Cancelling resume operation. Device not found."; cancel_wait_for_dev /dev/resume; rm -f -- "$job" "%s/initqueue/settled/resume.sh";' \
"$hookdir" >> $hookdir/initqueue/timeout/resume.sh
wait_for_dev "/dev/resume"
mv /lib/dracut/resume.sh /lib/dracut/hooks/pre-mount/10-resume.sh
elif ! getarg noresume; then
{
if [ -x /usr/sbin/resume ]; then
printf "SUBSYSTEM==\"block\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \$tempnode\"\n" "$a_splash"
fi
echo "SUBSYSTEM==\"block\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\"," \
" RUN+=\"/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume\"";
} >> /etc/udev/rules.d/99-resume.rules
fi
95resume/resume.sh 0000755 00000001236 15272355700 0010071 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
[ -s /.resume -a -b "$resume" ] && {
# First try user level resume; it offers splash etc
case "$splash" in
quiet )
a_splash="-P splash=y"
;;
* )
a_splash="-P splash=n"
;;
esac
[ -x "$(command -v resume)" ] && command resume $a_splash "$resume"
# parsing the output of ls is Bad, but until there is a better way...
ls -lH "$resume" | (
read x x x x maj min x;
echo "${maj%,}:$min"> /sys/power/resume)
>/.resume
}
95resume/module-setup.sh 0000755 00000001741 15272355700 0011215 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
# No point trying to support resume, if no swap partition exist
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs =~ ^(swap|swsuspend|swsupend)$ ]] && return 0
done
return 255
}
return 0
}
install() {
local _bin
# Optional uswsusp support
for _bin in /usr/sbin/resume /usr/lib/suspend/resume /usr/lib/uswsusp/resume
do
[[ -x "${_bin}" ]] && {
inst "${_bin}" /usr/sbin/resume
[[ -f /etc/suspend.conf ]] && inst /etc/suspend.conf
break
}
done
if ! dracut_module_included "systemd"; then
inst_hook cmdline 10 "$moddir/parse-resume.sh"
else
inst_script "$moddir/parse-resume.sh" /lib/dracut/parse-resume.sh
fi
inst_script "$moddir/resume.sh" /lib/dracut/resume.sh
}
90btrfs/80-btrfs.rules 0000644 00000000416 15272355700 0010465 0 ustar 00 SUBSYSTEM!="block", GOTO="btrfs_end"
ACTION!="add|change", GOTO="btrfs_end"
ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end"
RUN+="/sbin/btrfs device scan $env{DEVNAME}"
RUN+="/sbin/initqueue --finished --unique --name btrfs_finished /sbin/btrfs_finished"
LABEL="btrfs_end"
90btrfs/btrfs_finished.sh 0000755 00000001303 15272355700 0011370 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
btrfs_check_complete() {
local _rootinfo _dev
_dev="${1:-/dev/root}"
[ -e "$_dev" ] || return 0
_rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null)
if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then
info "Checking, if btrfs device complete"
unset __btrfs_mount
mount -o ro "$_dev" /tmp >/dev/null 2>&1
__btrfs_mount=$?
[ $__btrfs_mount -eq 0 ] && umount "$_dev" >/dev/null 2>&1
return $__btrfs_mount
fi
return 0
}
btrfs_check_complete $1
exit $?
90btrfs/module-setup.sh 0000755 00000002207 15272355700 0011026 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
local _rootdev
# if we don't have btrfs installed on the host system,
# no point in trying to support it in the initramfs.
require_binaries btrfs || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "btrfs" ]] && return 0
done
return 255
}
return 0
}
depends() {
echo udev-rules
return 0
}
installkernel() {
instmods btrfs
}
install() {
if ! inst_rules 64-btrfs.rules; then
inst_rules "$moddir/80-btrfs.rules"
case "$(btrfs --help)" in
*device\ ready*)
inst_script "$moddir/btrfs_device_ready.sh" /sbin/btrfs_finished ;;
*)
inst_script "$moddir/btrfs_finished.sh" /sbin/btrfs_finished ;;
esac
fi
if ! dracut_module_included "systemd"; then
inst_hook initqueue/timeout 10 "$moddir/btrfs_timeout.sh"
fi
inst_multiple -o btrfsck btrfs-zero-log
inst $(command -v btrfs) /sbin/btrfs
}
90btrfs/btrfs_timeout.sh 0000755 00000000374 15272355700 0011274 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
info "Scanning for all btrfs devices"
/sbin/btrfs device scan >/dev/null 2>&1
90btrfs/btrfs_device_ready.sh 0000755 00000001101 15272355700 0012216 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
btrfs_check_complete() {
local _rootinfo _dev
_dev="${1:-/dev/root}"
[ -e "$_dev" ] || return 0
_rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null)
if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then
info "Checking, if btrfs device complete"
btrfs device ready "$_dev" >/dev/null 2>&1
return $?
fi
return 0
}
btrfs_check_complete $1
exit $?
91crypt-gpg/crypt-gpg-lib.sh 0000755 00000002064 15272355700 0011661 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=4 sw=4 sts=0 et filetype=sh
command -v ask_for_password >/dev/null || . /lib/dracut-crypt-lib.sh
# gpg_decrypt mnt_point keypath keydev device
#
# Decrypts encrypted symmetrically key to standard output.
#
# mnt_point - mount point where <keydev> is already mounted
# keypath - GPG encrypted key path relative to <mnt_point>
# keydev - device on which key resides; only to display in prompt
# device - device to be opened by cryptsetup; only to display in prompt
gpg_decrypt() {
local mntp="$1"
local keypath="$2"
local keydev="$3"
local device="$4"
local gpghome=/tmp/gnupg
local opts="--homedir $gpghome --no-mdc-warning --skip-verify --quiet"
opts="$opts --logger-file /dev/null --batch --no-tty --passphrase-fd 0"
mkdir -m 0700 -p "$gpghome"
ask_for_password \
--cmd "gpg $opts --decrypt $mntp/$keypath" \
--prompt "Password ($keypath on $keydev for $device)" \
--tries 3 --tty-echo-off
rm -rf -- "$gpghome"
}
91crypt-gpg/module-setup.sh 0000755 00000000534 15272355700 0011624 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# GPG support is optional
check() {
require_binaries gpg || return 1
return 255
}
depends() {
echo crypt
}
install() {
inst_multiple gpg
inst "$moddir/crypt-gpg-lib.sh" "/lib/dracut-crypt-gpg-lib.sh"
}